All Products

Used oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 engine. This black painted twist on oil cap was found on non-emission cars. Meaning 49 States except for California.*Note - a chromed version was also available with engine dress up kits.

This 49 state oil filler cap fits valve covers that utilize twist-on oil caps. This cap is a reproduction of the original cap that was found on 1967 models with the S code 390 and 289 engines with dress up kit like found on DGS 1967 Cougars.. This part features a quality chrome finish along with a crisp "FoMoCo" stamping. At its widest point it is 3" in diameter. The total height is 2 1/4" high including the portion that goes into the valve cover.* Trivia - For 289 engines it should have an...

Used 1969-70 black Autolite oil fill cap with black plastic elbow. Very limited supply of these. Reproduction, Ford service replacement, and oil caps installed starting in 1969 utilize a black plastic elbow. Several variations noted from our collection, no doubt possible San Jose and Dearborn supplier differences. Will need detailing or fresh black paint applied. Would also suggest replacing the rubber grommet. These 50 year old rubber grommets are rock hard and likely leak air. Gasket to...

Used 1968 black Autolite oil fill cap with correct square metal elbow. Very limited supply of these. Reproduction, Ford service replacement, and oil caps installed starting in 1969 utilize a black plastic elbow. Reproduction steel elbow and rubber grommet available for those who already have an Autolite oil fill cap. Several variations noted from our collection, no doubt possible San Jose and Dearborn supplier differences.Replaces Ford part number C8AZ-6766-A.

Chromed "Autolite" oil filler cap, original cap chromed, not reproduction. Bare cap, will need baffle material added. Also recommend purchase of a rubber grommet and either plastic or steel PCV elbow. Your specific application will determine if plastic or steel elbow. See related items. C8AZ-6766-B$40 refundable core charge does apply.

This cap is an exact reproduction of the original. Features include three filters, the AUTOLITE logo and a beautiful chrome finish. The PCV elbow is included but not installed for those wanting to re-use their original metal elbow or the metal ( concours reproduction). Fits the 67, 68, 69, and 70 Mercury Cougar. Available in Black or Chrome Finish.Technically, this is a copy of the Ford service replacement oil cap, and the same cap with plastic elbow as found on cars starting in 1969. 1968...

Engine oil dipstick as found on most any 1967 Ford with 289 engines (C, A, or K Code). This has the correct small shield as found on 1967 and earlier cars, starting in 1968 this dip stick gained a larger 'bell' shaped shield that went over the dip stick tube. Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dip stick end is approximately 19.40 inches. The handles appear to have been painted black...

Engine oil dipstick as found on most any 1968 Ford with 289 or 302 engines (C, F or J Code). This has the correct bell shaped shield as found on 1968 and later cars. Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 19.40 inches. The handles could have been painted black or blue originally.Ford casting # C8OE-6750-B.

Engine oil dipstick as found on most any 1970-73 Ford with 351 Cleveland engines (H, or M Code), 1972-73 (Q code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dipstick end is approximately 21-11/16 inches. The handles were painted blue originally. Ford part # D0AZ-6750-A, Ford casting # D0AE-6750-A.*NOTE* In 1970 351W engines also were designated as H codes, 351W has 6 bolts attaching the valve covers,...

Engine oil dipstick as found on most any 1969 Ford with 351 Windsor engines (H or M Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 22.80 inches. The handles were painted blue originally. Ford part # C9OZ-6750-A, Ford casting # C9OE-6750-B.

Engine oil dipstick as found on most any 1970 Ford with 351 Windsor engines (H Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of shield to dip stick end is approximately 20 inches. The handles were painted blue originally. Ford master part # D0AZ-6750-C, Ford casting # D0AE-6750-C.*NOTE* 351C engines also were designated as H codes, 351W has 6 bolts attaching the valve covers, 351C has 8 bolts attaching the valve covers. ...

Painted engine oil dipstick as found on many 1967-69 Ford with 390 engines (S or X Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. From the top of the shield to the dipstick end varys from either 19.25" to approximately 20.25" (full, add, and safe marks are the same). The handles were painted blue originally. Typically the painted dipsticks were found on the non-GT (6.5 Litre) cars in 1968. Ford part # C7AZ-6750-A, Ford casting...

NOS New Old Stock oil dip stick tube for any 1968 Mercury Cougar or 1968-69 Ford or Mustang with 289 or 302 engines. Bare steel tube. Scott Drake makes a very good reproduction of this item for much less money. See related items.Ford part number C8AZ-6754-A.

Also available in Chrome. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375With the paint Stripped, it measures .365It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A.

Nice chrome finish. Also available in Ford blue. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375 With the paint Stripped, it measures .365 It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A. ...

Reproduction oil filter adapter from any 1968-70 Ford with 390 or 428CJ (non SCJ). Fits Cougar, Mustang, Torino, Fairlane, Cyclone, Ranchero, etc. Nice cast aluminum bracket for installing the spin on oil filter and oil pressure sending unit. Ford casting number C8AE-6881-A. Will fit 1967 FE engine blocks too. Those technically used an adapter with a casting number of C0AE-6881-A.

Used oil filter adapter from any 1968-70 Ford with 390 or 428CJ (non SCJ). Fits Cougar, Mustang, Torino, Fairlane, Cyclone, Ranchero, etc. Nice cast aluminum bracket for installing the spin on oil filter and oil pressure sending unit. Ford casting number C8AE-6881-A. Will fit 1967 FE engine blocks too. Those technically used an adapter with a casting number of C0AE-6881-A.

Bare Metal oil pan. Has no paint, chrome, or protective coating. Replaces Ford Part #: C5ZZ-6675

Nice reproduction oil pan for 351 Cleveland engines. Includes baffle and drain plug. Bare metal, ready for your choice of paint.

Includes drain plug

Nice reproduction oil pan, painted stock Ford blue on the exterior.

[No Description Provided]

Reproduction Small Block Chrome Oil Pan for the Mercury Cougar or Ford Mustang 289 or 302

Includes drain plug.

Includes drain plug.

Reproduction Small Block Painted Oil Pan for the Mercury Cougar or Ford Mustang 289 or 302

Used oil screen pick up tube assembly from a small block Ford 260, 289, or 302 engine. This is for most front sump 260, 289, or 302 engines in Ford cars up to at least 1972. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item.* Excludes 351W and 351C engines, and all F Series...

Used oil screen pick up tube assembly from a small block Ford 351W or Windsor engine. This is for most front sump 351W engines in Ford cars from 1969 to at least 1971. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item. * Excludes 289/302 and 351C engines, and all F...

Used oil screen pick up tube assembly from a 385 series big block Ford 429 Cobra Jet or 429 Police engine. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes.  * Excludes regular 429 / 460 passenger car engines, and all F Series pickup trucks, which have rear sump oil pans. Replaces Ford Part #: D0OZ-6622-A ...

Used oil screen pick up tube assembly from a 1969-70 Ford Boss 302 engine. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes.  * Excludes regular 289/302 engines. Replaces Ford Part #: C9ZZ-6622-A

Hex shaped extension. Made from machined metal. Highly polished and Chrome plated. Replaces Ford Part # : C2OZ-9B339-C

Hex shaped Oil Pressure Sending Unit Extension. Mounts the oil pressure sensor away from the engine blockConstructed from steel with a durable zinc finish. 1/4" NPT male & female ends plus an additional 1/8" NPT female port for items requiring an auxiliary oil pressure source. Eliminates the need for a T-fitting adapter when adding an aftermarket gauge or sensor. Replaces Ford Part # : C2OZ-9B339 and D1UZ-9B339-DP

Hex shaped extension. Made from machined metal and Zinc plated. Replaces Ford Part # : C2OZ-9B339

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation.

This listing is for the outer wheel house upper patch for the driver side of your 67-68. 

This listing is for the outer upper wheel house patch for the passenger side of your 67-68.  

Rear bracket assembly for mounting the 1967-68 Mercury Cougar overhead consoles. Bracket spans the roof section of the car, felt covered padding on the roof side. Comes with both small end brackets and clips. Main bracket has a Ford part number of C7WB-65519B24 and the two smaller brackets have a part number of C7WB-65519B38. *NOTE* Will not work for installing the long Mustang overhead consoles.

This good used original front bracket for the over head console of the Mercury Cougar and Ford Mustang. This unit is better than the repro and was also used on 1967-68 Mustang fastback. We also have the clips that attach to the overhead console and then clip into this bracket. Ford Part #: C7ZZ-65519B46-A. *NOTE* 2 are required per car.

New reproduction 1968 XR7 Overhead console warning light bar. Unlike 1967 XR7, 1968 features a woodgrain overlay and white lettering painted on the surface of each lens. Ever noticed how the originals have a chunk of vacuum hose wedged behind the mounting tabs? That is because the originals used the wrong grade of steel and the soft metal tabs would not hold them in place without help. We fixed that by using the correct quality of steel.

New product that is in stock and ready to ship! Unlike 1968 the 1967 xr7 console indicator light bar had no woodgrain applique. This will work fine on your 68 and some prefer the 1967 look over the 1968 version. We have a few of these with a 1968 Burl Wood Overlay applied to them. If you would like one of these, mention it in the order notes and if we have any remaining will send you one of these. These two pictures give you an idea what the lights will look like when illuminated. When not lit...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. If you buy the insulation pad that lies beneath this panel...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. If you buy the insulation pad that lies beneath this panel...

Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...

Reproduction mastic sound deadener for the package tray on your 1967 Mercury Cougar.