Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1441-1488 of 1684
$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 14-0032 -

New heavy duty rubberized undercoating for the Mercury or Ford. Heck, it can be used on ANY car. This body shop proven formula is used to protect against road salt, moisture and corrosion. To be used on the inner aprons and fenders, frame rails, fuel tanks, rocker panels, under hoods and firewall. Basically, anything you want to protect under your pride and joy will be encapsulated and protected with this heavy duty rubberized undercoating.

$0 Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 41847 -

Concourse Correct Vacuum Hose Aluminum Tie, used to dress up the distributor vacuum hose. Replaces Part # 383313-SA

$0 Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 41868 -

Concourse Correct Brass Vacuum Hose Tie, used to dress up the distributor vacuum hose. Replaces Ford Part # 383313-SB

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25938 -

Basic vacuum schematic manual for the 1968 Mustang / Shelby Mustang.

$7.99 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25955 -

Complete reprint of the 1967 Vacuum Schematic for the Mustang. If you would like we can include a copy of the Vacuum Schematic for the Cougar Vacuum Headlight System from the Ford Master Parts Catalog. This is for Mustang so it will not show the Cougar but will work for the vacuum system. Mustang and Cougar were the same with the exception of the headlights.

$0 Price: $6.00

Buy Details

Availability: In-Stock Item
Item #: 25940 -

Saves time and frustration! Shows schematic and diagrams that reveal the location and function of the many vacuum systems on Cougars.

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25941 -

Saves time and frustration! Shows schematic and diagrams that reveals the location and function of the many vacuum systems on the Cougar.

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25942 -

Saves time and frustration! Shows schematic and diagrams that reveal the location and function of the many vacuum systems on Cougar's.

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25943 -

Saves time and frustration! Shows schematic and diagrams that reveal the location and function of the many vacuum systems on Cougar's.

$0 Price: $9.77

Buy Details

Availability: In-Stock Item
Item #: 25944 -

Saves time and frustration! Shows schematic and diagrams that reveal the location and function of the many vacuum systems on Cougar's.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 26577 -

For 351 Cleveland or Windsor when equipped with the "Flame Arrestor" PCV Valve. Also fits multiple applications with 1" hole in steel valve covers in which the PCV valve presses into. Inside diameter is 23/32". Replaces Ford Part #: C8SZ-6892, C8SZ-6A892-A or 381898S.

$0 Price: $4.75

Buy Details

Availability: In-Stock Item
Item #: 53238 -

Short steel chromed valve stem for Ford wheels or any steel wheel with a 0.453" hole. Clamp in or bolt in style, sticks up 3/4 from wheel surface, 200psi maximum pressure. These will work with our aftermarket Ford wheels without trim rings. These are not compatible with our aluminum wheels.Premium grade, marked for "High Temperature".

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0044 -

Here is our used vent louver for your Mercury Cougar or Ford Mustang.

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0163 -

C2AZ-22963-A Special steel flat washer with flat sides for 1967-68 Mercury Cougar and Ford Mustang vent window pivot assembly. 1 per side.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 13-1111 -

New & Improved as of 2019! Woodgrain is now a near-exact match to the original.This is our reproduction simulated burl wood vinyl applique for the 1968 overhead console light bar. Check out our video on dash removal and restoration. Note that this shows the old version of these overlays with a different texture. ...

$0 Price: $8.95

Buy Details

Availability: In-Stock Item
Item #: 30758 -

Reproduction vinyl sleeve for the choke cable on the 1970 Cougar or Mustang equipped with a 390 or 428CJ. This sleeve protects the cable from rubbing on anything and prevent possible fraying. NOTE: This is an added layer of protection for your choke cable, the cable will have it's own sleeve.

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26338 -

Decal Text: AutoliteRegulator 15V C9TF-10316-A NEG

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26395 -

Decal Text: AUTOLITE Regulator D0AF-10316-A NEG

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26394 -

Decal Text: AUTOLITE Regulator D0TF-10316-A NEG

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26393 -

Used until early 1970 on vehicles not equipt with Air Conditioning. Decal Text: AUTOLITE REGULATOR 15V C8AF-10316-A NEG

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 11-0404 -

Cupped metal washer with center hole with flat sides for installing the two upper swivel rollers on the rear quarter windows. 2 per side 4 total per car. Fits 1971-73 Mercury Cougar and Ford Mustang Coupe and Convertible.Ford part number D1OZ-57263A86-A.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41343 -

#373820-S Copper washer for attaching the 8 inch or 9 inch third members to the axle housings. Steel washers will leak, made from copper which is a soft metal and seals under the attaching nuts. Copper washers like the OEM Ford installed washers. Takes 10 washers total for both 8 and 9 inch rear ends. *Tip - It is a good idea to inspect or replace your old washers, many times they have tool marks from the housing or nuts that cause small troublesome leaks.

$0 Price: $5.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25909 -

Used rubber washer for the locking pawl cable to cable guide used for the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. This unit fits against the cable side of the ninety degree angle. *NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this service is $90 per hour and most columns with serious problems do need complete tear down and build up which usually takes 3-4 hours plus the cost of any replacement parts...

$0 Price: $1.67

Buy Details

Availability: Out of Stock
Item #: 23772 -

Used on all four 1967 belts for a total of 8 per car. Found to be slightly dished on most examples we see.

$0 Price: $1.36

Buy Details

Availability: In-Stock Item
Item #: 33533 -

AMK seat belt washer B-13023. 0.46" ID x 1.25" OD zinc flat washer. Sized so that it rides on the shoulder of the seat belt bolts. It allows the retractor to rotate freely between this washer and the head of the seat belt bolt on 1969-73 cars. Two required per car, used only on the re-tractors.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41365 -

This is the rubber spacer / washer that goes between the bolt head and the metal washer of your seat belt hardware. The purpose of the rubber washer is to dampen any vibrations caused by the movement of the seat belt.Sold individually# 354959-S

$0 Price: $0.95

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23783 -

Often you will see minor irregularities in these washers. These would be considered "blems". Two required per car, used only on the re-tractors.

$0 Price: $0.95

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23769 -

Used on the retractors.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1240 -

These spacer / washers were used on the rear belts of 1968 - 1973 Cougars. 1968 used two per bolt for a total of eight, 69-71 used one per rear belt for a total of four and 72-73 used one per belt on the inner only as the outer belts had a re-tractor in the rear 72-73. They were red to guide the line workers on placement.

$0 Price: $1.24

Buy Details

Availability: In-Stock Item
Item #: 32500 -

These spacer / washers were used on the rear belts of 1968 - 1973 Cougars. 1968 used two per bolt for a total of eight, 69-71 used one per rear belt for a total of four and 72-73 used one per belt on the inner only as the outer belts had a re-tractor in the rear 72-73. They were red to guide the line workers on placement. Sized like the originals, but do not have the dimples all over. 0.53" ID x 0.88" OD.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 22223 -

These new taillight mounting washers are sold individually for your Mercury Cougar. Normally installed with a dollop of black goo for sealing out moisture. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 33711 -

Reproduction tooth backed washer for the bumper bracket to frame rail bolt on the 67-68 Cougar or Mustang. 

$0 Price: $1.16

Buy Details

Availability: In-Stock Item
Item #: 41746 -

Bumper bolt wavy washer sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as...

$0 Price: $9.35

Buy Details

Availability: In-Stock Item
Item #: 32127 -

This hard to find cast aluminum spacer may be all you need to provide that little bit of extra clearance for calipers, control arms, frame rails, etc. At only 1/8" thick, it does not require longer wheel studs like many thicker spacers you find on the market.

$0 Price: $2.60

Buy Details

Availability: In-Stock Item
Item #: 15590 -

New wheel stud replacement for all Mercury Cougars equipped with front drum brakes. Pretty much fits most other front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only, serrated 2" stud with correct 1/2 x 20 threads. These are slightly longer in length than the stock ones, this will allow the alloy wheels to fit the Classic Cougars.Replaces Ford part # C30Z-1107-A.*NOTE* You should use a press to remove and/or install the new studs.

$0 Price: $3.96

Buy Details

Availability: In-Stock Item
Item #: 33732 -

New extra long wheel stud replacement for all Mercury Cougars equipped with front drum brakes. Pretty much fits most other front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only, serrated 2-1/4" stud with correct 1/2 x 20 threads.  These are 1/4" longer in length than the stock studs, this will allow the alloy wheels, wheel spacers and aftermarket disc brakes.Replaces Ford part # C30Z-1107-A.*NOTE* You should use a press to remove and/or install the new...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 11971 -

Reproduction aqua rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 30936 -

Reproduction black rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 11959 -

Reproduction dark blue rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown here. ...