Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.
International Customers Click Here [Updated 6/2024]
 

This section relates to everything directly connected to the steering of your car. Please click onto the individual items to obtain price and other details. You can click the image up to three times for a larger view. Need help? Call 503-463-1130


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 481-528 of 656
$0 Price: $125.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0125 -

Used inner steering column tube for the tilt / tilt away for the Mercury Cougar or Ford Mustang. This unit fits within the outer steering column and is specific to 1969. Ford part # C9AZ-7212-F. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 12159 -

Reproduction tube seat set specific to the 1967 Cougar or Mustang control valve with the 1/4" fitting.

$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 32325 -

Reproduction machined tube seat set, for all 1968-70 Mercury Cougar and Ford Mustang. Also some 1967 Cougar or Mustang control valve and ram cylindernwith the 5/16" fittings. This set includes 6 seats, other kits only include 4 seats. Please note that early 1967 control valves had 1/4" fittings.

$0 Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 41947 -

Very nice quality reproduction turn signal lever, though the detail on the end is slightly different from the originals. Most will not notice the difference. We do get good used units in stock occasionally. Replaces Ford part # C7ZZ-13305.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he...

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14676 -

Good used turn signal stalk with no rust or peeling chrome. The 1970-73 with tilt column used a stalk with an additional plastic bushing near the base. This used unit is only for the person who cares about originality in the smallest of details as our repro is a decent piece, just not exact.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our...

$0 Price: $654.89

Buy Details

Availability: Rare / NOS Part
Item #: 31706 -

NOS Speed or cruise control switch, for factory installed cruise control. Very rare option on a Cougar or Mustang, also fits Thunderbird and Lincoln.  The 1968 Electrical manual shows a Lincoln part number of C7VA-9D752-G. Service replacement part number is D1VY-13305A. Would need to remove the white tilt bale collar prior to use.

$0 Price: $490.85

Buy Details

Availability: In-Stock Item
Item #: 31425 -

Reproduction Speed or cruise control switch, for factory installed cruise control. Very rare option on a 67-69 Cougar or Mustang, also fits Thunderbird, Lincoln, Marquis. Keep in mind that these new levers will not come with the plastic plug at the end of the harness, you will need to use your old one, or you can splice as shown in the included installation sheet. As you know, these levers were made from plastic in the sixties and seventies. This new reproduction is machined from billet...

$0 Price: $185.00

Buy Details

Availability: Out of Stock
Item #: 33237 -

New Old Stock turn signal switch for fixed steering columns on 1968-69 Mercury Cougar and Ford Mustang.Replaces Ford part # C8SZ-13341-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $129.85

Buy Details

Availability: Out of Stock
Item #: 33223 -

New Old Stock turn signal switch for any 1969 Mercury Cougar or Ford Mustang with fixed steering columns. This switch will also fit fixed column Ford's 1968-1969 Ford Crown Victoria / Full Size / LTD / Fairlane / Torino / Falcon / Galaxie & 1970 Mercury Comet / Ford Falcon / Early 1970 Ford Maverick / Mercury Comet without locking steering wheel & all 1968-1969 Mercury Comet's Ford part # C9AZ-13341-B.  *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the...

$0 Price: $90.91

Buy Details

Availability: In-Stock Item
Item #: 41722 -

Our turn signal switches are made by the original supplier to Ford from the original tooling. If you have replaced your sequential unit in the trunk with one of our new solid state sequential units and are still having problems then the turn signal switch is most likely the culprit as the only other part to the system is the wiring harness itself. Often when your brake lights are not working the turn signal switch is the culprit as the brake lights feed through the turn signal switch. This...

$0 Price: $9.45

Buy Details

Availability: In-Stock Item
Item #: 15828 -

Reproduction turn signal switch connector for your 67 Cougar or Mustang. Work with either tilt or fixed columns. This is the connector that attaches the turn signal switch to the main dashboard wiring harness.

$0 Price: $11.88

Buy Details

Availability: Out of Stock
Item #: 31439 -

Used turn signal switch connector for your 67 Cougar or Mustang. Work with either tilt or fixed columns. This is the connector that attaches the turn signal switch to the main dashboard wiring harness. OEM was a white colored plug,the Scott Drake reproduction is black.. 

$0 Price: $101.45

Buy Details

Availability: In-Stock Item
Item #: 41725 -

Our turn signal switches are made by the original supplier to Ford from the original tooling. If you have replaced your sequential unit in the trunk with one of our new solid state sequential units and are still having problems then the turn signal switch is most likely the culprit as the only other part to the system is the wiring harness itself. Often when your brake lights are not working the turn signal switch is the culprit as the brake lights feed through the turn signal switch. This...

Turn Signal Switch - Tilt Column - Repro ~ 1974 - 1979 Mercury Cougar
1974-1979 Mercury Cougar |1977-1979 Ford Thunderbird | 1972-1976 Ford Fairlane |1977-1979 LTD II / Ranchero / Torino and Elite |1975 Mercury Monarch without Instrument mounted windshield wiper switch | 1974 - 1976 Mercury Montego
0
$0 Price: $106.85

Buy Details

Availability: In-Stock Item
Item #: 41726 -

Quality switch that is getting increasingly hard to find these days. This same switch was used in the 1977-1979 Ford Thunderbird / 1972-1976 Ford Fairlane / 1977-1979 LTD II / Ranchero / Torino and Elite / 1975 Mercury Monarch without Instrument mounted windshield wiper switch / 1974 - 1976 Mercury Montego*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist...

$0 Price: $3.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41384 -

Used steering column wiring harness plug. Replacement plug for all 1968-69 Mercury Cougar and Ford Mustang, with tilt or fixed steering columns. Generic Ford part likely lots of applications between 1968-69, Ford, Mercury, & Lincoln. This plug is natural or white, there is also a black color version of this plug used by Ford 1970-72.Ford part number C8AZ-14489-S.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject....

$0 Price: $142.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0129 -

Used vacuum actuator for the tilt / tilt away steering column in the Mercury Cougar, Ford Mustang or Thunderbird. This unit was used through late 1968 and 1969 and has the embedded safety starter switch in good working order. 1967 through early 1968 actuators are white, where these units are black in color. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service, you can contact Tony Augustine at...

$0 Price: $160.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0030 -

Used vacuum release valve for the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. This vacuum solenoid releases the steering column for the swing away function. These vacuum tilt solenoids are tested and guaranteed to work. Bench testing the 1967-69 tilt away release solenoid: Verify that there is continuity between the two electrical spade connectors. No continuity means the the windings in solenoid windings are bad. This is a bad solenoid. Next, put vacuum to...

$0 Price: $148.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0086 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

$0 Price: $138.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0072 -

Vacuum / electric tilt away solenoid for the 1969 Mercury Cougar and Ford Mustang. Original Ford part number C9ZZ-3D536-A. These vacuum tilt solenoids are tested and guaranteed to work. Bench testing the 1967-69 tilt away release solenoid: Verify that there is continuity between the two electrical spade connectors. No continuity means the the windings in solenoid windings are bad. This is a bad solenoid. Next, put vacuum to the lower port (10-17 inches of vacuum) any handheld or car vacuum...

$0 Price: $257.15

Buy Details

Availability: In-Stock Item
Item #: 13997 -

Vacuum reservoir that mounts under the battery tray for factory tilt swing away steering columns. Fits Cougar, Mustang, and Thunderbird. Single nipple tank, we also sell the double nipple tank for the 1967-68 tilts. Replaces Ford Part # C9ZZ-3E547-A. The collapsing or imploding problem has been resolved on this vacuum reservoir with the addition of the ribbing for strength. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* WCCC...

$0 Price: $5.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25909 -

Used rubber washer for the locking pawl cable to cable guide used for the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. This unit fits against the cable side of the ninety degree angle. *NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this service is $90 per hour and most columns with serious problems do need complete tear down and build up which usually takes 3-4 hours plus the cost of any replacement parts...

$0 Price: $18.99

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0164 -

This is a plastic cushion, washer and/or spring between the lower knuckle and inner tube on a 1967 tilt-away steering column.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0031 -

Used wire extension for the tilt / tilt away steering column found in the Mercury Cougar or ford Mustang. *NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this service is $90 per hour and most columns with serious problems do need complete tear down and build up which usually takes 3-4 hours plus the cost of any replacement parts needed. To offset the cost of your rebuild, you can send us additional parts or parts columns and we will give...

$0 Price: $7.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0168 -

This Screw fastens the plastic guide for turn signal wires next to column under the cone by steering wheel.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0076 -

Used jumper wire used in the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0152 -

Used black plastic clip for holding the turn signal wiring harness to the column tube, next to the vacuum actuator. Fits any 1967 Mercury Cougar or Ford Mustang with tilt swing away steering columns.

$0 Price: $67.77

Buy Details

Availability: In-Stock Item
Item #: 32798 -

Quality reproduction of the tilt column wiring harness for the 1967 Mercury Cougar and Ford Mustang. Two harnesses as shown in the wiring diagrams. 

$0 Price: $67.85

Buy Details

Availability: In-Stock Item
Item #: 41466 -

Reproduction tilt / tilt away steering column wiring harness for the Mercury Cougar or Ford Mustang. Exact copy in every way! If you call and tell us the long sad story of how when you pulled your column in 1982 in a bone yard and left this harness behind unknowingly. we will have to charge you extra... Just kidding! *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our...

$0 Price: $199.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0158 -

Used tilt column wiring harness for the 1967 Mercury Cougar. 

$0 Price: $94.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32895 -

Used wiring harness for the 1968 Mercury Cougar or Ford Mustang equipped with the tilt / tilt away steering column. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $86.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32896 -

Used tilt / tilt away steering column wiring harness for the 1969 Mercury Cougar or Ford Mustang. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $67.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0089 -

For use on fixed columns only. Attaches to the bottom side of the column to keep the wiring in place. Fits all 1968-69 Mercury Cougar, Ford Mustang, Ford Torino, Mercury Cyclone.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41443 -

Used steering column wiring harness plug aka Turn Signal Switch Harness Connector. Replacement plug for all 1970-72 Mercury Cougar and Ford Mustang, with tilt or fixed steering columns. Generic Ford part likely lots of applications between 1968-69, Ford, Mercury, & Lincoln. This plug is black, there is also a natural or white color version of this plug used by Ford 1968-69. Ford part number D0AZ-14489-L.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the...

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 10686 -

Steering column wiring harness plug aka Turn Signal Switch Harness Connector. Replacement plug for all 1968 - 1969 Mercury Cougar and Ford Mustang, with tilt or fixed steering columns. Generic Ford part likely lots of applications between 1968 - 1969, Ford, Mercury, & Lincoln. Ford part number C8AZ-14489-S.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the...

$0 Price: $27.86

Buy Details

Availability: Out of Stock
Item #: 15-0062 -

1967 Cougar Owners: To view our exploded view interactive diagram of the tilt steering column parts, click here. This is the part of the tilt switch that the turn signal wand screws into. This part is always included when you purchase a new turn signal switch. 1967-69 mechanism has two springs on either side, the 1970-73 mechanism uses just one spring. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service,...

$0 Price: $30.47

Buy Details

Availability: Out of Stock
Item #: 15-0112 -

This is the part of the tilt switch that the turn signal wand screws into. This part is always included when you purchase a new turn signal switch. 1967-69 mechanism has two springs on either side, the 1970-73 mechanism uses just one spring. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many...

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 24841 -

C9ZZ-3K505-A Unique for the 1969 Boss 302 Eliminator and Mustang. Flat steel bar stock spacer that positions the power steering pump a measured distance away from the cylinder head.

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 24582 -

C9AZ-3D600-A Power steering pump adjusting spacer for use without air conditioning. For most 1971 Mercury Cougar or Ford Mustang with 429CJ engines.

$0 Price: $12.55

Buy Details

Availability: Out of Stock
Item #: 13-0010 -

WCCC developed walnut straight grain kit for rimblow horn pad restorations. Fits all Standard / Decor (non-XR-7) 1969 Cougar hardtop and convertibles. All three pieces were carefully plotted on a computer program to account for their unique contoured shape for each individual insert. Detailed instructions included for preparation and installation. We suggest detailing your horn pad plastic insert, prior to applying this wood grain kit for best results. *NOTE* Fits 1969 rimblow horn pad plastic...

$0 Price: $25.88

Buy Details

Availability: Out of Stock
Item #: 15-0057 -

Used upper steering column bearing for your 67 - 73 Cougar or Mustang. One required per car. Fixed Columns only use the upper bearing, while the tilt columns used an upper and lower. The used lower bearing can be found here. Outside diameter: 1 3/16 " * - may not fit some 67 Mustang applications with a fixed column as these used Ford part # C4OZ-3517-A, which is the same part used in the Fairlanes/Comets with a fixed column. To our knowledge this bearing is not currently reproduced. *NOTE* For...

$0 Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 15-0065 -

Emergency flasher bezel for the side of the tilt steering column. Another hard to find, fragile, plastic part. Subject to availability. Paint to match your interior.

$0 Price: $235.89

Buy Details

Availability: Out of Stock
Item #: 24652 -

Good used part with nice emblem, woodgrain appliqué. If someone has a roll of material that resembles the burl grain pattern here we would really like to hear from you! the black paint on the edges will need to be redone. The engineering number as seen from the back reads C9WA-3D752-A. We also have examples in the $50 to $100 range that are ready to put on as is but are not show quality like this one. Call and we will walk you through our stock on hand over the phone. We usually have 40 to...

$0 Price: $82.89

Buy Details

Availability: Out of Stock
Item #: 12114 -

Used grade "B" bezel for the three spoke rim low steering wheel for the Mercury Cougar XR7. If someone has a roll of material that resembles the burl grain pattern here we would really like to hear from you! the black paint on the edges will need to be redone. We also have examples in the $50 to $100 range that are ready to put on as is but are not show quality like this one. Call and we will walk you through our stock on hand over the phone. We usually have 40 to choose from in all conditions...

$0 Price: $202.86

Buy Details

Availability: Out of Stock
Item #: 19409 -

Used grade "A" bezel for the three spoke rim blow steering wheel found in the Mercury Cougar Eliminator or the decor equipped Cougar. This is the best of the best that we have in used and it will look mint.Ford part # C9WA-3D752-A.

$0 Price: $42.89

Buy Details

Availability: Out of Stock
Item #: 24014 -

For any 1967 or 1968 Cougar with either a 289 or 302 engine. Virtually the same bracket as for the 1969 351W engine. Except for the obvious 1-1/4 inch hole in the middle of the bracket, they are the same. Compare the OEM used part price to the reproduction part. Ford master part number C7AZ-3C511-A, same part number as the 351W bracket with the addition of the large hole. Ford intended to have a casting number stamped on these brackets and it would have been C7AA-3C511-B. For restoration...

$0 Price: $55.89

Buy Details

Availability: Out of Stock
Item #: 25284 -

For restoration purposes, this bracket was factory painted satin black. May or may not have a stamped number of D1OA-3C511-AA. *This bracket can only be used in conjunction with an all steel pump mounting bracket. 71 72 73