All Products

Reproduction green tinted windshield that features a blue tinted band a crossed the top of the windshield. Not only will this unit look great, it will fit perfectly as well. Planning on installing the glass yourself? We also sell the glass to window channel weld.BECAUSE OF THE HIGH COST OF SHIPPING, ALL WINDSHIELDS ARE AVAILABLE FOR DROP SHIP OR LOCAL PICK-UP ONLY. Our website is currently unable to accurately calculate truck freight costs, so don't be deceived by the shipping rate...

Driver quality complete assembly with average chrome, emblem and cracked lens.

Restored fuel door framed insert without the background decal or crest, for the 1969 - 1970 Mercury Cougar. Foil backing plate available in reproduction. At the moment there are no reproductions on the walking cat, you can however polish up your old cat and re-use it in this frame.

This filter ONLY fits the following 1967 - 1973 Cougars: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many Mustang applications. Replaces Ford Part #: C7OZ-9155-A, Filter FG-19.

Reproduction OE steel fuel tank to pump one piece fuel line with 5/16" fittings that runs down the transmission tunnel for early production Mercury Cougars.*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date. 

Reproduction stainless steel fuel tank to pump one piece fuel line with 5/16" fittings that runs down the transmission tunnel for early production Mercury Cougars.*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date. 

Reproduction stainless steel fuel tank to pump two piece fuel line with 5/16" fittings that runs down the rocker on the Mercury Cougar.  *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction OE steel two piece fuel tank to pump fuel lines with 3/8" fittings that runs down the rocker panel on the Mercury Cougar. *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction stainless steel two piece fuel tank to pump fuel line with 3/8" fittings that runs down the rocker panel for the Mercury Cougar.If you decide to upgrade to larger lines, remember that you have to use 68 fasteners.*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date. ...

Reproduction stainless steel two piece fuel tank to pump fuel line with 3/8" fittings that runs down the rocker panel on the Mercury Cougar. *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction stainless steel two piece fuel tank to pump fuel line with 3/8" fittings that runs down the rocker panel on the Mercury Cougar. *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction stainless steel fuel tank to pump fuel line for the Mercury Cougar equipped with the 428 Cobra Jet and staggered rear shock. *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.*TRIVIA* The factory staggered the rear shock to help reduce axle wrap and wheel hop under hard...

Reproduction OE steel two piece fuel tank to pump fuel line for the Mercury Cougar.*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction stainless steel two piece fuel tank to pump fuel line for the Mercury Cougar.*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Reproduction fuel pump for all 1967-69 Mercury Cougars and Ford Mustangs equipped with either the 427 or 428 engine. Updated design from the originals, fuel lines fit the same.

Exclusive to WCCC, here's our reproduction in-tank, fuel sending unit with the low fuel option. Good for all 1967 - 1968 Mercury Cougar XR7's and all Ford Mustangs with 16 gallon fuel tanks. This is a reproduction of a 1968 fuel sending unit with three prongs (2 electrical and 1 alignment prong). The original Ford casting number was C8ZF-9275-B, master parts catalog number C8ZZ-9275-D. This unit comes with a new 3/8 inch filter, brass float, and sending unit gasket. These are completely...

We worked with the manufacturer to develop this reproduction in-tank, fuel sending unit with the low fuel option, but we are not happy with the results.   This is a reproduction of a 1970 fuel sending unit with 3 prongs (2 electrical and 1 alignment prong). The original Ford casting number was D0WF-9275-B. This unit comes with a new 3/8 inch filter, brass float, and sending unit gasket.  These are completely interchangeable on all 1970 Mercury Cougar XR7's, which came with...

Exclusive to WCCC, here's our reproduction in-tank, fuel sending unit with the low fuel option. Good for all 1971 - 1973 Mercury Cougar XR7's and all Ford Mustangs with 16 gallon fuel tanks. This is a reproduction of a 1971 fuel sending unit with three prongs (2 electrical and 1 alignment prong). The original Ford casting number was D1WF-9275-AC. This unit comes with a new 3/8 inch filter, brass float, and sending unit gasket. These are completely interchangeable on all 1971 - 1973 20 gallon...

New manufactured fuel / gas tank for 1967-68 Mercury Cougar and 1965-68 Ford Mustang, 16 gallon capacity, has drain plug. This is the economy version, which has a slightly different stamping, and is made in Taiwan. Replaces Ford part #C5ZZ-9002. Check out our video on replacing the fuel system on a '68 Cougar! ...

New manufactured fuel / gas tank for 1969 Mercury Cougar and 1969 Ford Mustang, 20 gallon capacity, has drain plug. This is the economy version, which has a slightly different stamping, and is made in Taiwan.Replaces Ford part #C9ZZ-9002. *NOTE* Tank will fit into all 1967-68 cars, fuel filler necks must be adjusted to fit with this taller tank. Sending units ideally should be changed to the 1969 sending units. 1970 cars with California emissions will have to change filler necks entirely. ...

New manufactured fuel / gas tank for 1970 Mercury Cougar and 1970 Ford Mustang, 22 gallon capacity, with drain plug. This is the economy version, which has a slightly different stamping, and is made in Taiwan. Replaces Ford part #D0ZZ-9002-D. *NOTE* Tank will fit into all 1967-69 cars, fuel filler necks must be adjusted to fit with this taller tank. Sending units ideally should be changed to the 1970 sending units for 22 gallons. 1970 cars with California emissions will have to change filler...

Reproduction fuel tank for the 71 - 73 Mercury Cougar. 20 gallon capacity, correct in every way. Beware that the Mustang tanks sold by most vendors has a different filler neck angle that doesn't fit Cougars. Replaces Ford part #: D1WY-9002-A ...

D0WY-9A195-A Main evaporative assembly that mounts directly on top of the evaporative 1970 fuel tank. *Note - This is only a small part of the 9B004 assembly.

9B004  Assembly consists of D0WY-9A195-A tank connector assembly, D0WY-9A091-A front vent expansion separator, DOWY-9A091-B rear vent expansion separator, D0WY-9A188-A & D0WY-9A188-B & D0WY-9A225-A mounting brackets, and all of the factory lines that connect them. 1970 Cougar part only guys, probably would work in a 1970 Mustang, but the Mustang has all different part numbers.

This is our reproduction, uncut, driver side (left hand), long, front and rear floor pan for your Mercury Cougar convertible.

This is our reproduction, uncut, passenger side (right hand), long, front and rear floor pan for your Mercury Cougar convertible.

Reproduction full length driver side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years. Hi, and sincerely thanks for all help I've received from WCCC during my (mega) 1968 restoration project. If everyone would be that helpful, the world would be a much better place. ;-) My car is almost ready for the road, but - as always - there...

Reproduction full length passenger side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years.

If you're going to rebuild your engine, this is the item you'll want to get. It's the complete gasket set for your 289 and 302 engines. (Will not fit early Boss engines). Included in this kit are the following: Head Gaskets Intake GasketsOil Pan Gasket Rear Main SealExhaust Manifold Gaskets Valve Cover Gaskets Water Pump GasketsTiming Cover Gaskets Timing Cover SealWater Neck GasketFuel Pump GasketDistributor Gasket ...

NOS gauge for any 1967-68 Standard Model Cougar. This combination gauge is a fuel and temperature gauge all in one with an oil and amp "idiot" lens on either side. Both gauges are guaranteed to work good. New Old Stock gauge or 'pointer dial' as the box says. NOS C7WY-9280-A. Check out the video below on our new gauge tester: ...

Good used tachometer for your 1971 - 1973 XR7 Cougar.Check out the video below on our new gauge tester: ...

These are original amp meters converted from reading amps to reading volts. Includes New XR7 Amps overlay made from top quality 3M 467MP and use 200MP adhesive. The longer 200MP adhesive is in place the stronger it binds. Lens has had the "amps" buffed off. Optional Volt decal is included. Core charge includes both lens and amp meter. Core charge will not be refunded if either piece is missing. Click here for a article describing the advantages of a Volt Meter.  Replaces Ford Part #:...

Reproduction set of four lenses for a standard Cougar without the optional clock. Correct Convex shape made from modern UV resistant plastic.Check out the video below on our new gauge tester: ...

Set of three reproduction gauge lenses and one NOS clock lens for the standard Cougar with the optional clock. Correct Convex shape made from modern UV resistant plastic.Check out the video below on our new gauge tester: ...

Reproduction set of four lenses for an XR7 or Eliminator Cougar. The difference between Standard and XR7, is that the XR7 and Eliminator have a trip odometer reset button embedded in the lens at 6 O'clock. Correct Convex shape made from modern UV resistant plastic. Check out the first 3 minutes of video below that shows how to remove the dash cluster:Heater Core Replacement Check out the video below on our new gauge tester: ...

Ready to move into the Cougar big time? Well now's your chance with this flashy gold plated money clip emblazoned with the XR7-G shifter emblem. A great item to add to your collection of memorabilia, or to actually use! We're not sure of it's exact origin, but we though we'd pass on the opportunity for someone to get their hands on it. Circular center measures 1-1/2" across.

This grille will be less than perfect with one or two cracks, bend showing and pitting. A Grade "B" will not be cracked around the perimeter and will not be missing any pieces. Good for a driver quality car. The 1973 grilles generally survive better than the prior year grilles, due to the extended 1973 front bumper and that is is physically smaller than the 1971-72 grille. 1973 grilles are not compatible with prior years. Ford casting number D3WB-8A133. D3WY-8200,

Used grade "B" center grille for the 1970 Mercury Cougar. This may have a few cracks, will show some pitting and may have a few broken studs. A great option if you are looking to just fill a hole, but some people like our reproduction unit that you can find here. However, nothing beats original FoMoCo! ...

Very rare to find one of these that has never been tapped in the slightest. We have a very limited quantity of grade A centers in stock. Ford part # C7WY-8A047-A. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

This portion of the grille bolts in between the eyelid and center grille. This is the best we have to offer in used condition with no pits, cracks or obvious scratches.

This portion of the grille bolts in between the eyelid and center grille. This is the best we have to offer in used condition with no pits, cracks or obvious scratches.

This is the portion of the 1970 grill that ties it all together and mounts it to the core support. This grade A part has no cracks or broken spots where the headlight retainer rings mount. Keep in mind we have grade B examples for half the price with only minor imperfections. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

This is the portion of the 1970 grill that ties it all together and mounts it to the core support. This grade A part has no cracks or broken spots where the headlight retainer rings mount. Keep in mind we have grade B examples for half the price with only minor imperfections.

Used grade "A" driver side (left hand) headlight eyelid door for the Mercury Cougar as taken from a Western parts car. This unit will not have any bends, cracks, or pits on the face of the chrome. Not perfect, but the best original unit we can obtain.Casing number: C9WB-13A139

This 1970 eyelid is the portion of the grill that raises when you turn on your headlights. No cracks, pits or obvious scratches. Keep in mind we have grade B examples for half the price with only minor imperfections.

NOS part that shows shelf wear and may need to be repainted in places. For 1967 and early 1968 Cougars built prior 12/15/1967. Can easily be made to fit 1968. Ford part numbers: C7WY-13A137-B (Headlamp exterior cover)C7WY-13A155-A (Headlamp hinge) Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...