International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Fuel Line - Tank To Pump - Two Piece - 3/8 Inch Fittings - OE STEEL - Repro ~ 1970 Mercury Cougar

Reproduction OE Steel Fuel Tank to Pump Line 2 Piece with 3/8" Fittings for the 1970 Mercury Cougar V8

1970 Mercury Cougar

2 Review(s) 0

Item #: 26884

Price: $104.55

Cost: 8364

Earns: 419

Bonus: 0

Availability

Ships Direct from Supplier (Except International) - Ships from Supplier Warehouse in 3-10 Business Days
EXCEPT AS NOTED IN THE PRODUCT DESCRIPTION
International Orders: This item will ship from the supplier to our warehouse before shipping to your address, add 7-10 Days

Applications

1970 Mercury Cougar

Description

Reproduction OE steel two piece fuel tank to pump fuel lines with 3/8" fittings that runs down the rocker panel on the Mercury Cougar.

*NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped. When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

Specifications:

Shipping Weight: 7.00 LBS

(weight shown may be the dimensional weight)

2 Reviews (5.00 of 5 Rating)

5.00 out of 5 stars
Based upon 2 Review(s).

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

Brian

Ontario

2019

2/11/2019

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Fit perfect

Jim

2014

Excellent part!

8/14/2015

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

This is the absolutely correct part and it fits perfectly. Do not buy the generic Mustang part from other suppliers, the bends at the rear wheel area are incorrect and the Cougar fuel line is slightly longer.

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 26576 [More info]
[More info] Grommet - Fuel Line - 3/8 Inch - Fuel Line to Side Apron - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction 3/8" fuel line to side apron grommet for the Mercury Cougar or Ford Mustang.Replaces Ford part # C7ZZ-9288.

Buy

$2.35
Frequently
Purchased With

Item #: 26586 [More info]
[More info] Seals - Door Glass - Front of Door to Window - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Reproduction door glass seals for the front of the door to the window glass for the Mercury Cougar or Ford Mustang. Replaces Ford part # C9ZZ-6520264. Do you have questions about Glue-In vs Bolt-In glass? How...

Buy

$8.65
Frequently
Purchased With

Item #: 23561 [More info]
[More info] Beltline Weatherstrip Kit - Door and Quarter Glass - Standard - Convertible - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and...

Buy

$141.45
Frequently
Purchased With

Item #: 10273 [More info]
[More info] Brake Line Kit - Disc - Power Brakes - OE STEEL - Repro ~ 1970 Mercury Cougar
Reproduction OE steel power disc brake line kit for the Mercury Cougar. This item is bent and dropshipped from the supplier when it is ordered and is available in both OE steel and stainless steel. These kits...

Buy

$152.85
Frequently
Purchased With

Item #: 41986 [More info]
[More info] Cable - Emergency / Parking Brake - Long Side / Passenger Side - Rear - Repro ~ 1970 - 1973 Mercury Cougar / 1970 - 1973 Ford Mustang
Reproduction emergency / parking brake cable for the Mercury Cougar or Ford Mustang with V-8 engines, that is approximately 133 1/8" long. This unit fits from equalizer to rear brakes and one is required per...

Buy

$51.71
Frequently
Purchased With

Item #: 13860 [More info]
[More info] Oil Cap - Push On Chrome (Open Emissions) - Repro ~ 1967 - 1973 Mercury Cougar Ford Mustang
Brightens the engine compartment and looks sharp. Fits aftermarket valve covers only. These require a rubber grommet to fit into the valve cover. Please Note: This oil cap DOES NOT fit the finned "G" valve covers...

Buy

$8.45
Frequently
Purchased With

Item #: 26521 [More info]
[More info] Seal - Cowl To Hood - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Fits along the lip of the cowl cover and seals to the underside of the hood. Replaces Ford Part #C9ZZ-16740.

Buy

$6.45
Frequently
Purchased With

Item #: 25953 [More info]
[More info] 1970 High Performance Book: Ford Vs. Competition ~ 1970 Ford / Mercury
Comparative Guide of the 1970 Ford Performance Vehicles and the "Competition", which included the Cougar.

Buy

$12.75
Frequently
Purchased With

Item #: 11788 [More info]
[More info] Oil Dipstick & Tube - 351W - CHROME - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Nicely chromed dipstick tube and dipstick for the Mercury Cougar or Ford Mustang equipped with the 351 Windsor. Replaces Ford part # C9OZ-6750-A or D0AZ-6750-C.

Buy

$13.37
Frequently
Purchased With

Item #: 26225 [More info]
[More info] Seal Kit - Taillight Housings To Body - Repro ~ 1969 - 1970 Mercury Cougar
This kit is for both sides and its function is to seal the taillight housings to the tail light panel. The oval gaskets make a seal around the openings for the individual tail light socket openings and the...

Buy

$19.15
Frequently
Purchased With

Item #: 23814 [More info]
[More info] Carburetor Spacer Plate - 2V - 289 / 302 / 351 - 2100 - Used ~ 1967 - 1972 Mercury Cougar / 1967 - 1972 Ford Mustang
Factory cast aluminum two barrel carburetor spacer plate. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. Fits all Ford 2 barrel carburetors, bore size is 1-5/8...

Buy

$29.88
Frequently
Purchased With

Item #: 41814 [More info]
[More info] Brake Hose - Flex - Left Front - Disc Brake - RUBBER - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Flexible high pressure replacement brake hose for the front driver (left hand) side of Mercury Cougars or Ford Mustangs equipped with disc brakes.Replaces Ford part # C8ZZ-2078-B.

Buy

$60.89

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials

E-F50B01