Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1969-2016 of 4620
$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25405 -

Optional trunk lamp. Includes mercury switch that mounts on inside trunk lip and wiring pigtail. Driver quality part, Bulbs available. Guaranteed to work, no cuts or splices. Can be added to most cars. Single wire female connector, located near the drivers side trunk hinge. Self grounds to deck lid, one power lead wire. Mercury switch turns on and off with the raising and lowering of the deck lid.

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 26738 -

Plastic Chrome center cap with Red background and chrome Ford logo. Better than original! Original look wheel emblem is made from original dies. This plastic cap is painted and detailed in the original colors. This was never used on any year of Cougar but they do look good! Replaces Ford Part # D0OZ-1130-F.

$0 Price: $48.85

Buy Details

Availability: In-Stock Item
Item #: 33515 -

Very in-depth 57-page book from Ford on the sequential and emergency flasher system in the 1967 Cougar. Free download! To download the high resolution version (20 MB) of this manual, add it to your cart and you will receive a link to download this manual at checkout. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential...

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14202 -

Good used map light assembly. Ford Part #: D1WB-15650-AA or D1WY-15650-AA (Light Assembly) Also available with mounting hardware

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 31753 -

Reproduction map light assembly for the Mercury Cougar XR7. It mounts under the dash pad on the passenger side (right hand) and comes with the housing, lens and wiring harness. Hardware included. *NOTE* This unit is not the same as the one that is used on the Eliminator or standard Cougar. The standard / Eliminator unit has the switch in the housing.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10839 -

Used map light assembly for the Mercury Cougar XR7. This unit mounts under the dash pad on the passenger side (right hand) and comes with the housing, lens and wiring harness. After January 1970, Mercury changed the housing to plastic. We occasionally have those versions, please call for availability. This unit measures about 6-1/8" long, 1-11/16" wide and about 1-5/16" deep. *NOTE* This unit is not the same as the one that is used on the Eliminator or standard Cougar. The standard /...

$0 Price: $60.17

Buy Details

Availability: In-Stock Item
Item #: 14376 -

Map light bezel for overhead roof consoles on both 1967-68 Mercury Cougar XR7 and Ford Mustang. These are a great reproduction at a great price. These were always pitted and before the reproductions came out three years ago a very nice used pair sold for about $100. To date we have sold more than 300 pairs and have had great feedback! Sold in pairs. Bezels only. Sometimes called a 'door' Ford part number C7ZZ-13788-A. *Customer Comments* Hello. I just bought my first 1967 Cougar XR7 in about...

$0 Price: $77.20

Buy Details

Availability: In-Stock Item
Item #: 15298 -

New reproduction power disc brake master cylinder for the Mercury Cougar or Ford Mustang equipped with factory power disc brakes in front and drums in the back.  This unit has a 1" bore and includes a new cap and diaphragm as shown.  Unlike many others you will find, this unit does not need brass line adapters to fit your factory lines, they are correctly sized, will not interfere with your shock tower and ready to bolt on.   Has proper threaded line size for OEM or...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 11059 -

Reproduction two tab power window switch for the master switch panel on the drivers door of mid 1970-72 cars. Research shows this switch was used in the master control panel on the drivers side door. With the mid to late1970-1972 and later power window systems. Compare your switch to these to insure you have the right configuration.However, for a 1969 and early 1970 master switches use a C9AZ-14529-D switch. That switch is also available, see related products tab.

$0 Price: $31.82

Buy Details

Availability: Out of Stock
Item #: 30683 -

Reproduction master power window switch for 1973 Cougars and Mustangs. Five switch assembly - driver / passenger front and rear windows, and a master lock out switch. This reproduction is identical with the exception of the smoother edged switches. Fits 1973 Mercury Cougar and Ford Mustang.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32976 -

The car pictured is a 67, but the copyright says "1969 Fred Bonner Corporation" and the header says Mercury Cougar introduced 1968.Measures 5"x7"

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19013 -

What a difference a few minor blemishes can make in price! Our grade "B" used centers will always have a few minor dings as shown and maybe some very minor pitting in the painted part but after some clean up they will look almost as good as our grade "A" units when viewed from several feet away. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! Check out this video ...

$0 Price: $49.85

Buy Details

Availability: Out of Stock
Item #: 32999 -

NOS 1969 Mercury Competition Team pamphlet. These packets were handed out to Mercury team dragsters in order to log their run times. Once you logged enough class wins, the concept was to mail the pamphlet to the Mercury Competition Team Headquarters and claim your Mercury Competition Team Driver's Award Certificate. Originally these booklets included stickers and decals, but those seem to be missing from this particular booklet. Also included is an order form from that year to...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22990 -

Used aluminum "Mercury Man" head for the center grille medallion. These are just pressed and swedged into the die cast bezel and come out easily with a light tap from behind. Keep in mind these highly amplified pictures make the emblem look much worse than it really is. Do know that the one you get will have light road debris wear but no major scratches, pits or scrapes. You will also want to replace the background foil decal when you purchase this emblem. Part of Ford assembly C7WY-8A223-A ...

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16247 -

Good used metal portion of the door panel. If yours is bent or you're doing custom made door panels, you will need these.

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16250 -

Good used metal portion of the door panel. If yours is bent, or you're doing custom door panels, you will need these. Fits 1969-70 Mercury Cougar and Ford Mustang.

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16248 -

Good used metal portion of the door panel. If yours is bent or you're doing custom made door panels, you will need these.

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16249 -

Good used metal portion of the door panel. If yours is bent, or you're doing custom door panels, you will need these. Fits 1969-70 Mercury Cougar and Ford Mustang.

$0 Price: $54.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1027 -

Metal support piece for the passenger side xr7 dash bezel used on the LATE 1968 Cougar, much better than the multiple piece brackets found on the majority of 67 and 68 xr7 models. This piece mounts on top of the dash bezel and adds strength to where it mounts to the dash. It will require the use of epoxy or tiny shallow depth screws to adhere it to the plastic bezel. Through 67-68, there were four different style brackets, you can see all four by following this link. Check out our video on...

$0 Price: $26.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32440 -

This unique gasket is only slightly different from the driver side. The angle at the front is just a little different and notice it does not have a hole drilled for the remote mirror cable used on the driver side. This gasket was also used on the 1971 Ford Torino / Ranchero and Mercury Cyclone. This is an upgrade over the reproduction we carry for a 1969 - 1970 Cougar that has a passenger side Sport Mirror. The Ford Engineering number seen on the pad reads D1OB-17724-AA. Do you have questions...

$0 Price: $45.00

Buy Details

Availability: In-Stock Item
Item #: 99050 -

Facebook sale item

$0 Price: $90.00

Buy Details

Availability: In-Stock Item
Item #: 99100 -

Facebook sale item

$0 Price: $43.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25005 -

Used distributor modulator thermal switch for the Mercury Cougar or Ford Mustang equipped with the M code 351C-4V engine and FMX automatic transmission. Originally this switch was mounted in the drivers side door jamb and had a bimetal strip that was calibrated for ambient temperatures between 50 and 58°F. We dont have a way to test these, so they are sold as is. Ford part # D0AF-12A164-B.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31268 -

Used distributor modulator thermal switch for the Mercury Cougar or Ford Mustang. Originally this switch was mounted in the drivers side door jamb and had a bimetal strip that was calibrated for ambient temperatures between 50 and 58°F. We dont have a way to test these, so they are sold as is. Ford part # D2AF-12A164-C

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25009 -

D0AF-9E718-C Distributor modulator control module for 1970 Mercury Cougar and Ford Mustang with the M code 351C-4V engines and FMX or automatic transmission. The 'black box', supposed to have a blue cover, The Autolite Shop Tips guide describes this box as having a blue cover and a stamped part number of D0AF-9E718-S. The Ford MPC shows a master part number of D0AZ-9E718-C, and a box marked D0AF-9E718-C.

$0 Price: $49.86

Buy Details

Availability: In-Stock Item
Item #: 31269 -

Used control box for the spark control system on the 1972 Mercury Cougar or Ford Mustang. Ford part number D3AF9E447

$0 Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31266 -

Used control box for the spark control system on the 1973 Mercury Cougar or Ford Mustang. Ford part number D3AF9E447

$0 Price: $90.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31779 -

D2ZZ-9A820-A Distributor modulator lower speedometer cable for 1972-73 Mercury Cougar and Ford Mustang. Shown to be 48 inches long.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25010 -

D0AF-9E731-A Distributor modulator speedometer cable speed sensor for 1970 Mercury Cougar and Ford Mustang with the M code 351C-4V engine and FMX or automatic transmission. Mounts inline on a two piece speedometer cable. Ford master part number D0AZ-9E731-A.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31262 -

Used distributor modulator speedometer cable speed sensor for 1972 - 1973 Mercury Cougar and Ford Mustang. Mounts inline on a two piece speedometer cable. Ford master part number D2AF-9E731-A.

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25072 -

D0OZ-12A163-B Paired steel tubes that run along the driver side valve cover. Used on the 1970 Mercury Cougar, Mercury Cyclone, Ford Torino, and Ford Mustang with the M code 351C-4V engine and FMX or automatic transmission.

$0 Price: $72.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25251 -

D0ZZ-9A820-H Distributor modulator upper speedometer cable for 1970 Mercury Cougar and Ford Mustang with the M code 351C-4V engine and FMX or automatic transmission. Cable that connects the back of the speedometer and the speed sensor of the modulation system. Shown to be 10.54 inches long. Please see D0ZZ-9A820-B or -G for the lower cable section.

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31263 -

Used distributor modulator upper speedometer cable for 1971 - 1973 Mercury Cougar and Ford Mustang with the FMX or automatic transmission. Cable that connects the back of the speedometer and the speed sensor of the modulation system. Shown to be 10.54 inches long. 

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31265 -

Used wiring harness for the spark control box for the 1973 Mercury Cougar or Ford Mustang . This is only the harness, you can find the control box here.

$0 Price: $35.69

Buy Details

Availability: In-Stock Item
Item #: 12930 -

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

$0 Price: $42.15

Buy Details

Availability: In-Stock Item
Item #: 13614 -

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

$0 Price: $28.42

Buy Details

Availability: In-Stock Item
Item #: 14925 -

OE Steel Transmission Modulator Line for the 1967 - 1968 Mercury Cougar equipped with the C4 transmission.

$0 Price: $67.37

Buy Details

Availability: In-Stock Item
Item #: 14930 -

Stainless Steel Modulator Vacuum Line for all V8 engines with a C6 transmission except 429CJ or the 351C with a 4 barrel carburetor.

$0 Price: $47.05

Buy Details

Availability: In-Stock Item
Item #: 14928 -

Stainless Steel Transmission Modulator Line for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang with the C6 transmission.

$0 Price: $30.95

Buy Details

Availability: In-Stock Item
Item #: 14932 -

Stainless Steel Transmission Modulator Vacuum Line for the 1969 Mercury Cougar or Ford Mustang with a 351 Windsor and an FMX transmission.

$0 Price: $30.25

Buy Details

Availability: In-Stock Item
Item #: 15240 -

Reproduction Stainless Steel FMX Transmission Modulator Line for the 1972-1973 Mercury Cougar or Ford Mustang

$0 Price: $43.15

Buy Details

Availability: In-Stock Item
Item #: 11328 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford Part # C7ZZ-16A052-BRB. ...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 10135 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford Part # C9ZZ-16A052-BRB. ...

$0 Price: $61.15

Buy Details

Availability: In-Stock Item
Item #: 11329 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-BRC. ...

$0 Price: $51.35

Buy Details

Availability: In-Stock Item
Item #: 11274 -

Curved Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C9ZZ-16A052-BRC. ...

$0 Price: $30.35

Buy Details

Availability: In-Stock Item
Item #: 11326 -

Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARB.

$0 Price: $56.35

Buy Details

Availability: In-Stock Item
Item #: 11325 -

Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering.  It will also help reduce the chances that your shock towers will develop stress cracks over time. Note: Not for A/C or Convertible applications. This product will not clear the distributor or A/C Compressor.  Replaces Ford part # D1ZZ-16A052-A. "Times New Roman"">...

$0 Price: $39.95

Buy Details

Availability: In-Stock Item
Item #: 11327 -

Straight Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARC.