Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1201-1248 of 4620
$0 Price: $36.95

Buy Details

Availability: In-Stock Item
Item #: 10893 -

Like working on your Cougar's engine? Keep your Cougar's fender from getting scratched with this Cougar fender cover.Check out this video of our 2013 Open House event!

$0 Price: $35.85

Buy Details

Availability: In-Stock Item
Item #: 12090 -

Like working on your Cougar's engine? Keep your Cougar's fender from getting scratched with this Cougar fender gripper. Check out this video

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24663 -

Our grade "A" fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. Ford part # C9WB-16A169-B, Mercury MPC # C9WY-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25120 -

Our grade "A" fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. Ford part # D0WB-16019. Mercury MPC # D0WY-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help.

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27220 -

Our grade "A" fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. There are very slight differences between 1969 and 1970 and they do carry different part numbers. Ford part # C9WB-16A168-B, Mercury MPC # C9WY-16018-A. Do you have questions about your Cat's factory pinstriping? This link may help. ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27219 -

Our grade "A" fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. Ford part # D0WB-16018. Mercury MPC # D0WY-16018-A. Do you have questions about your Cat's factory pinstriping? This link may help.

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24102 -

Our Grade "B" 1967 - 1968 front fender extensions almost always have the damage centered around the "tip" as evidenced by the one you see pictured. We will not send you junk, but rather a part needing only minor attention. Notice the portion behind the eyebrow is painted black from the factory. Used hardware is often available for free if you mention it. Do not over tighten this part as they are soft metal and warp easily. Ford casting number as seen on back reads C7WB-16019-A. Do you have...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31359 -

Our grade "B" fender extensions have a few dings, scrapes or warping due to over tightening of studs. Ford part # C9WB-16A169-B, Mercury MPC # C9WY-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31793 -

Our grade  B fender extensions have dings, scrapes or warping due to over tightening of studs. Ford part # D0WB-16019. Mercury MPC # D0WY-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help.

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27218 -

Our Grade "B" fender extensions almost always have the damage centered around the "tip" as evidenced by the one you see pictured. We will not send you junk, but rather a part needing only minor attention. Ford part # C7WB-16018-A.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31794 -

Our grade B fender extensions will have dings, scrapes or warping due to over tightening of studs. Ford part # D0WB-16018. Mercury MPC # D0WY-16018-A. Do you have questions about your Cat's factory pinstriping? This link may help.

$0 Price: $69.87

Buy Details

Availability: In-Stock Item
Item #: 41100 -

This is our reproduction fender fastener kit for you r Mercury Cougar or Ford Mustang.

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 31747 -

Reproduction Driver side fender extension. This latest in a series of 68 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16". NOTE - This splash shield does not come with the rubber, but you can find the seal kit here. Replaces Ford part # C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. ...

$0 Price: $50.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24160 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases, these used shields will need to have the stapled rubber shields replaced. A Mustang shield will not fit a Cougar because the fender has a much different contour.Ford part # C7WY-16A574-A.

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 24482 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases, these used shields will need to have the stapled rubber shields replaced. Same part as the1967 piece, but with a section cut out for the marker light housing. A Mustang shield will not fit a Cougar Because the fender has a much different contour.Ford part # C8WY-16A574-A.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24665 -

Mercury Cougar front inner fender splash shield featuring all plastic construction. Ford part # C9WB-16A563-A, MPC number C9WY-16A574-A.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25123 -

Mercury Cougar front inner fender splash shield featuring all plastic construction.Ford part # D0WB-16A563-A, MPC number D0WY-16103-A.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25339 -

Mercury Cougar left front fender inner splash shield.Ford part # D1WY-16103-A.

$0 Price: $48.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24668 -

Mercury Cougar rear inner splash shield featuring all plastic construction.Ford part # C9WB-16B569-E, MPC # C9WY-16103-A.

$0 Price: $38.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25340 -

Mercury Cougar left rear fender inner splash shield.Ford part # D1WY-16103-B.

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 31748 -

Reproduction Passenger side fender extension. This latest in a series of 68 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16". NOTE - This splash shield does not come with the rubber, but you can find the seal kit here. Replaces Ford part number C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. ...

$0 Price: $50.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24159 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases,  these used shields will need to have the stapled rubber shields replaced. The 1967 and 1968 Mercury Cougar inner fender splash shields were constructed using a metal panel with a rubber material stapled to this metal shield. A Mustang shield will not fit a Cougar because the fender has a much different contour.Ford part # C7WY-16A573-A.*Installation and detailing tip -...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24481 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases, these used shields will need the to have stapled rubber shields replaced. Same part as the 1967 piece, but with a section cut out for the marker light housing. A Mustang shield will not fit a Cougar because the fender has a much different contour. Supply limited due to the proximity to the battery.Ford part # C8WY-16A573-A.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24664 -

Mercury Cougar front inner fender splash shield featuring all plastic construction. Ford part # C9WB-16A562-A, MPC number C9WY-16A573-A.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25122 -

Mercury Cougar front inner fender splash shield featuring all plastic construction. Ford part # D0WB-16A562-A, MPC number D0WY-1602-A.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25337 -

Mercury Cougar right front fender inner splash shield.Ford part # D1WY-16102-A.

$0 Price: $48.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24667 -

Mercury Cougar rear inner splash shield featuring all plastic construction.Ford part # C9WB-16B568-E, MPC number C9WY-16102-A.

$0 Price: $38.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25338 -

Mercury Cougar right rear fender inner splash shield.Ford part # D1WY-16102-B.

$0 Price: $71.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16757 -

These used original plastic filler mount to the passenger side hood extension, and filled the gap between center grille surround (extension) and the side grille. Very rare to find a 1970 Mercury Cougar with both of these intact as the driver side often got broken when someone reached in the recess for the hood release latch. Passenger side only, please note that these normally have a hairline crack in one of the holes, Sold as a single only. Nice reproduction pairs are available for much less...

$0 Price: $32.55

Buy Details

Availability: In-Stock Item
Item #: 26042 -

These dense, cardboard fillers are placed over the trunk drop offs. They are sturdy reproductions that fit well and every old Cougar seems to need them as moisture and general wear and tear take their toll over the decades. Sold as a pair only. If you see these advertised for less money elsewhere we would like to be notified.

$0 Price: $32.27

Buy Details

Availability: In-Stock Item
Item #: 26041 -

These die cut sturdy trunk filler boards fit over either side of the trunk drop off and allow your trunk mat to lay flat over the trunk drop off areas. Sold as a pair.

$0 Price: $28.53

Buy Details

Availability: In-Stock Item
Item #: 26043 -

Sold as a pair. Not only are these usually in poor shape but more times than not they are missing altogether. Great price on a quality, die cut part.

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25152 -

OEM used. Rust and damage free. Installation gasket, clamps, and hoses are available. Fits 1970 20 gallon emissions fuel tank. DSO 52 and 53 California.

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25024 -

1970 California evaporative system. Tapered hose. This item is not reproduced and it is getting to be hard to find a good pliable hose with no damage.Filler neck not included.

$0 Price: $67.27

Buy Details

Availability: In-Stock Item
Item #: 33643 -

Reproduction fuel filler neck from a 1967-68 Mercury Cougar. Correct for use with factory or reproduction 16 gallon fuel tanks. 

$0 Price: $67.27

Buy Details

Availability: In-Stock Item
Item #: 33644 -

Reproduction fuel filler neck for the 69 Mercury Cougar, to be used with factory or reproduction 20 gallon fuel tank.

$0 Price: $72.73

Buy Details

Availability: Out of Stock, On Order
Item #: 33885 -

Reproduction fuel filler neck for the 70 Mercury Cougar. Fits 1970 22 gallon non-emissions fuel tank. 49 states (non-California).

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24199 -

Used fuel filler neck from a 1967-68 Mercury Cougar. Correct for use with factory or reproduction 16 gallon fuel tanks. May have small dent(s) on the side where it is exposed to the loading of stuff in the trunk.I received my fuel filler neck and was very pleased with the condition of my part. You said rust free and it looks very nice. I appreciate this kind of business and am glad there are professional business people like you guys out there serving us Cougar lovers. Thanks again, Looking...

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24762 -

OEM used not reproduction. Rust and damage free. Installation gasket, clamps, and hoses are available. Fits 1969 20 gallon fuel tank.

$0 Price: $36.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27380 -

OEM used not reproduction. Rust and damage free.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12442 -

Used assembly line, white plastic filter retainer for the Mercury Cougar, Ford Mustang and other Fords equipped with Midland Booster. It fits between the master cylinder and brake booster on the aluminum master cylinder spacer. The repro and service replacement filter covers are usually black not white. You can find the filter here. ...

$0 Price: $68.85

Buy Details

Availability: In-Stock Item
Item #: 26048 -

Reproduction, nice thick firewall insulation pad for the Mercury Cougar or Ford Mustang. We actually like this one better than the "premium" version. These are pre-formed for a perfect fit and appearance and greatly reduced engine noise and heat. The A/C and non A/C versions are the same piece and will fit both A/C and non A/C cars.This pad comes with all the rubber clips needed for installation.

$0 Price: $68.85

Buy Details

Availability: In-Stock Item
Item #: 26049 -

Reproduction thick premium firewall insulation pad with clips for the Mercury Cougar or Ford Mustang. These are pre-formed for a perfect fit and appearance and greatly reduced engine noise and heat. The A/C and non A/C versions are one in the same and this unit will fit both A/C and non A/C cars. Unlike cheap paper backed insulation, these quality pads are backed with thick rubber.

$0 Price: $65.75

Buy Details

Availability: In-Stock Item
Item #: 26050 -

Reproduction thin firewall insulation pad with clips for the Mercury Cougar or Ford Mustang. This unit will fit both the A/C and non A/C Cougar or Mustang.

$0 Price: $58.25

Buy Details

Availability: In-Stock Item
Item #: 41851 -

Concourse Correct FLAPPER DOOR ASSEMBLY for vehicles equipped with ram-air. Includes: door, pivot rod, and 2 retaining clips Fits 1969 390GT and 1970 Boss 302, 351W, 351C. Replaces Ford Part #: C9ZZ-9610-A

$0 Price: $30.87

Buy Details

Availability: Out of Stock
Item #: 31803 -

Used convertible top flapper stopper. Technically called a "lasting", this is the thin strip of 1/16" thick metal that slides inside the sleeve of your convertible top to keep it from flapping. We will rarely have these on hand, so we've included the dimensions so that you can fabricate your own if needed. 2 required per vehicle.