Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15304 -
D0ZZ-7528-E reproduction Z-bar or clutch equalizer bar only for the Boss 302 Cougar Eliminator or Mustang. These are exact copies of the originals, and those used stock cast iron exhaust manifolds. There is no way to tell if this will work with headers.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33407 -
Reproduction D1ZZ-7528-C Equalizer bar or "Z" bar assembly, for 351 and 429CJ engines with a manual transmission. Fits all years 1971-73 Mercury Cougar and Ford Mustang. Includes frame rail bracket and clutch rod as shown.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13823 -
Clutch equalizer pivot mount, engine side. Zinc plated. Replaces Ford part #: C7ZZ-7A572-BR.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41532 -
Mounts on frame for equalizer bar to ride on. Replaces Ford Part #: C5ZZ-7507-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 30930 -
Clutch equalizer pivot mount, engine side. Fits all 1971 - 1973 Mercury Cougar with 351 Cleveland engine, and 1971 - 1973 Ford Mustangs with 302 or 351 Cleveland engine. Replaces Ford part #: D1ZZ-7A572-A.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 24371 -
C8AZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12-5/16 inches long. Alternate number C8AA-7515-B or C8AA-7541-B. Couple of variations of this fork. Most versions will not be stamped. Spring and side holes not needed for Mustang and Cougar applications. Originally for 1968 full sized cars with 289 or 302 engines and manual transmissions. Maybe 6 cylinders, not sure, but vert likely. Cougar 1971 - 1973, 351 Engines. Mustang 1971 - 1973,...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 25023 -
D0DZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Alternate number D0DA-7515-B. Service replacement after 1973 D3DZ-7515-A for Maverick/Comet. Cougar 1970, 351 Engines. Mustang 1970, 250/302/351 Engines. Maverick 1971 - 1972, 250/302 Engines. Grabber Comet 1971 - 1972, 250/302 Engines. GT Fairlane 1970, 250/302/351 Engines. Torino / Ranchero 1970, 250/302/351 Engines. Montego / Cyclone 1970, 250/302/351 Engines. MX, ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41406 -
C5OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long. Specifically used with a 157 tooth flywheel, as opposed to the 164 tooth fly wheel used after Feb 1968.Replaces ford Part # C5OZ-7515-B. Cougar before 2-15-1968, 289/302 Engines. Mustang before 2-15-1968, 289/302 Engines. *Note - This style of clutch fork uses the 'wire' for the holder, not the clip. ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 16-0041 -
C5OZ-7515-B Manual transmission clutch fork for small block V8 engines - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long from the divot where the rod rides to the tip of the forked end. Specifically for the C5DA-6394-A bellhousing that used a 157 tooth flywheel. Cougar 1967 through 2-15-1968. XR7, XR7-G. Mustang 1965 through 2-15-1968. 2+2, GT. Fairlane 1965 through 2-15-1968. 500, XL, Custom. Torino / Ranchero 1968 through 2-15-1968. 500, XL Comet 1965 through...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41445 -
C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 10-1/2 inches long. Specifically used with a 164 tooth flywheel, as opposed to the 157 tooth fly wheel used before Feb 1968.Replaces ford Part # C8OZ-7515-A, alternate number C8OA-7541-A. Cougar after 2-15-1968 - 1969, 289/302 Engines. Cougar 1969, 351 Engines. Mustang after 2-15-1968, 289/302 Engines. Mustang 1969, 250/302/351 Engines. Fairlane after 2-15-1968,...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 16-0042 -
C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 10-1/2 inches long from the divot where the rod rides to the tip of the forked end. Specifically used with a 164 tooth flywheel, as opposed to the 157 tooth fly wheel used before Feb 1968. Replaces Ford part number C8OA-7541-A. Ford casting number C8OZ-7515-A. New reproduction small block fork also available here. Cougar after 2-15-1968 - 1969, 289/302 Engines. Cougar 1969, 351...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24437 -
C8OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-B. Cougar after 2-15-1968 - 1969, 390 Engines. 390IP. Mustang after 2-15-1968 - 1969, 390 Engines. 390IP. Fairlane after 2-15-1968, 390 Engines. Torino / Ranchero after 2-15-1968 - 1969, 390 Engines. Comet after 2-15-1968 - 1969, 390 Engines. Montego after 2-15-1968 - 1969, 390 Engines. ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14233 -
Replaces Ford part number C8OZ-7515-D. Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-D.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24438 -
C8OZ-7515-D Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-D. Cougar 1968 - 1969, 428 Cobra Jet engines. Mustang 1968 - 1969, 428 Cobra Jet engines. Fairlane 1968 - 1969, 428 Cobra Jet engines. Torino / Ranchero 1968, 428 Cobra Jet engines. Montego / Cyclone 1968 - 1969, 428 Cobra Jet engines. *Trivia - This fork originally had a blue paint mark for identification purposes. This model clutch fork...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 25089 -
D0OZ-7515-A Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number D0OA-7541-A. Designed for the big spline 1 3/8" input shaft toploaders. Cougar 1970, 428 Cobra Jet engines. Mustang 1970, 428 Cobra Jet engines. Torino / Ranchero 1970 - 1971, 429/429CJ Engines. Cobra Montego / Cyclone 1970 - 1971, 429/429CJ Engines.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13882 -
C8OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-B. Cougar after 2-15-1968 - 1969, 390 Engines. 390IP. Mustang after 2-15-1968 - 1969, 390 Engines. 390IP. Fairlane after 2-15-1968, 390 Engines. Torino / Ranchero after 2-15-1968 - 1969, 390 Engines. Comet after 2-15-1968 - 1969, 390 Engines. Montego after 2-15-1968 - 1969, 390 Engines. ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41551 -
Used until early (prior to 2/15/1968) on manual transmission cars. Comes with rivets. Replaces Ford part #: B9AZ-7522-B.This style uses the early clutch fork with the anti rattle wire.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15300 -
Clutch Fork Pivot for Cougars manufactured after 2/16/1968. Replaces Ford Part #: C8AZ-7522-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32757 -
Manual transmission clutch kit for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is a 10 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32758 -
Manual transmission clutch kit for all 1967-69 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 390 engines. This is a 11 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26772 -
This pedal assembly is a copy of the 1967 clutch pedal. It can be used on 1968 with no modifications. Fits all engine applications. Has replaceable shaft as shown. Replaces Ford Part #: C7ZZ-7519-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41901 -
Quality reproduction clutch pedal that works on all 1969-70 Mercury Cougar and Ford Mustangs. Improved design for easier installation.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41511 -
These clutch pedals feature an improved design (removable pin) for easier installation. Compatible with existing hanger assembly even in automatics. Replaces Ford Part # D1ZZ-7519-B.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24305 -
C7ZZ-7519-A We also offer used clutch pedals along with our quality reproduction 1967-1968 clutch pedal. These pedals will no doubt show some wear around the clutch rod holes. Three and four speed pedals are all the same. Mustang is the same too.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24552 -
C8ZZ-7519-B We also offer used clutch pedals along with our quality reproduction 1967-1968 clutch pedal. These pedals will no doubt show some wear around the clutch rod holes. Three and four speed pedals are all the same. Mustang is the same too.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 18597 -
D1ZZ-7519-B Good used pedal but these pedals will no doubt show some wear around the clutch rod holes. Three and four speed pedals are all the same. Mustang is the same too.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11798 -
Bumper that helps stop the 'clunk' noise when you take your foot off of the clutch pedal on manual transmission 67 - 68 Cougars and Mustangs.Replaces Ford Part Number: C7ZZ-7583
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33278 -
This kit has everything you need to repair your clutch and brake pedal and pedal support in one easy kit. Repairs 1967-73 Mercury Cougar or 1965-73 Ford Mustang. Plus many other Ford cars.This kit requires welding. For use on pedal hangers that are all wallered out, or 1971-73 pedal hangers that are not round. Kit has roller bearings. Quality Scott Drake / Holley product. *Hint - All 1967-70 brake pedal hangers have the clutch pedal shaft bushings, even the automatic cars. The originals are...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13940 -
These reproduction pads are high quality replacements for worn or missing original pads. Replaces Ford part number C9ZZ-7A624-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41494 -
This reproduction stainless trim mounts over your pedal pad. Not only adds style but also holds your pad in place. Replaces Ford part number C5ZZ-7B544-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41537 -
Includes machined pedal shaft, washer and special pin. Replaces Ford Part #: C5ZZ-2478-AK.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14302 -
Made of heavy gauge steel with a satin black painted finish. Correct threads and hole pattern for 1967 - 1968 Mercury Cougar or Mustang. Replaces Ford Part #: C7ZZ-7535-B.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11778 -
Made of heavy gauge steel with a satin black painted finish. Replaces Ford Part #: C9ZZ-7535-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11775 -
(7521) Correct contour insures a good fit, 12 1/2" long. This is for both 3 and 4 speed cars. Check out the comparison picture with the off-shore crapola rod sold by most vendors. The only reason you replace this rod is that it is wore down in the area where the bushing seats. Unfortunately when the Chinese were given a sample to copy they must have been given a worn out one! The one on the left (made in USA) fits tight with the bushing and was copied from a NOS sample. Replaces Ford Part #:...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14320 -
(7521) Correct Contour and fit. Connects pedal to Equalizer bar. Fits all engine sizes 3 and 4 speed. Replaces Ford Part #: C9ZZ-7521-C.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32162 -
Manual transmission clutch throw out bearing for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is with a 10 inch disc.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13925 -
Reproduction aluminum shift indicator console overlay for the Mercury Cougar or Ford Mustang. Although a brushed finish is correct, this reproduction has a coarser brush stroke when compared to the originals and is a bit dull. We recommend a quick polish to make them look closer to the finish of the originals.
These fit well, and unless you put them up against an original, it is hard to tell the finish is slightly different.
This installs around your console...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15245 -
Reproduction transmission cooling lines for the Mercury Cougar or Ford Mustang equipped with the C-4 automatic transmission. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 15246 -
Reproduction transmission cooling lines made of stainless steel for the Mercury Cougar equipped with the C-4 automatic transmission. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14773 -
Reproduction transmission cooling lines made of OE steel for the Mercury Cougar or Ford Mustang produced from 1967 through early 1968 that came equipped with the C-6 automatic transmission and 390 engine. These lines are also available in stainless steel and are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14774 -
Reproduction transmission cooling lines made of stainless steel for the Mercury Cougar produced in 1967 through early 1968 that came equipped with the C-6 automatic transmission and 390 engine. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14780 -
Reproduction transmission cooling lines for the Mercury Cougar or Ford Mustang equipped with the 428 Cobra Jet engine and C-6 automatic transmission. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14775 -
Reproduction transmission cooling lines made of OE steel for the late production 1968-70 Mercury Cougar or Ford Mustang equipped with the C-6 automatic transmission. These lines are also available in stainless steel and are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14776 -
Reproduction transmission cooling line made of stainless steel for the Mercury Cougar produced from late 1968 through 1970 that came equipped with the C-6 automatic transmission. These lines are also available in OE steel and are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14777 -
Reproduction transmission cooling lines made of OE steel for the Mercury Cougar or Ford Mustang equipped with the FMX automatic transmission and 351C engine. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 14778 -
Reproduction transmission cooling lines made of stainless steel for the Mercury Cougar equipped with the FMX automatic transmission and 351C engine. These lines are sold in pairs.