Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 335
$1.40 Price: $1.64

Buy Details

Availability: In-Stock Item
Item #: 32390 -

3/8 washer for installation of idler, adjusting pulleys, and brackets, on some 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, 1-2 are typically used per car. 

$1.85 Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 32389 -

3/8-16x7/8 Bolt for installation of idler, adjusting pulleys, and brackets, on most 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, up to 8-9 are typically used per car. 9/16" hex, washer head bolt.

$29.00 Price: $49.50

Buy Details

Availability: In-Stock Item
Item #: 41284 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds

$35.00 Price: $57.27

Buy Details

Availability: In-Stock Item
Item #: 41283 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $0.98

Buy Details

Availability: In-Stock Item
Item #: 30880 -

This stepped window trim clip is great for times when your stainless trim just will not click into place. We have found that the reproduction cougar rear window gasket is a little taller than OEM and this adjustable clip allows you to compensate. Another instance this multi-fit clip works is when someone has replaced one or more nail-heads that the clip fastens to and located them in the wrong place.Sold Individually.These clips attach to posts built in to the car. In case you're missing some...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41334 -

Reproduction Alternator Connection Nut for the 1967 - 1969 Mercury Cougar - 1967 - 1969 Ford MustangSold insividually 

$0 Price: $9.16

Buy Details

Availability: In-Stock Item
Item #: 31501 -

Reproduction apron nuts for the 67 - 70 Cougar or Mustang. These are the fasteners that are imbedded into the aprons on either side of the engine compartment and are used to fasten the hood hinges to the car. Sold in a pack of 6 fasteners.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0057 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

$0 Price: $3.05

Buy Details

Availability: In-Stock Item
Item #: 15524 -

OEM style nut to hold the axle U-bolt to the axle. Fine threaded like originals 7/16-20 grade 5. Will not fit some reproduction U-bolts. Sometimes these are called shock plate bolts. Replaces Ford part # 379244-S

$0 Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 41047 -

Reproduction disc brake hose bolt for any 1968-73 Mercury Cougar and generally all other Ford cars with factory disc brakes. Special hollow bolt with cross drilled hole. Attaches the high pressure hose to the caliper.

$0 Price: $18.77

Buy Details

Availability: In-Stock Item
Item #: 42058 -

These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 53233 -

Black phosphate body bolt for various applications on 67 - 73 Mercury Cougars and Mustangs. These bolts can be used anywhere you have J-nuts, including but not limited to fenders, inside your headlight buckets, and even in your center grille piece on the 67 - 68. Bolt size: 1/2"-18 X 1-3/16"

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27541 -

Used bolt and washer for attaching the crankshaft balancer or damper to the crank shaft. 15/16 inch hex head with 5/8-18 threads and 1.75 inches long. Basically fits all Mercury Cougar engines except the 1971 429 Cobra Jets engines. Fits 1967-73 289, 302, Boss 302, 351W, 351C, 390, 427, and 428CJ engines.Torque specifications for this bolt are 70-90 foot pounds.*Note does not fit 429 or 460 V8 engines or any 6 cylinder engines.

$0 Price: $8.05

Buy Details

Availability: In-Stock Item
Item #: 41022 -

Reproduction 289 - 302 Alternator Bolt w- Smog for the 1967 - 1969 Mercury Cougar - 1967 - 1969 Ford MustangSold individually 

$0 Price: $2.25

Buy Details

Availability: In-Stock Item
Item #: 32454 -

Coil bracket mounting bolt for all V-8 engines as found in 1967-73 Mercury Cougar and Ford Mustang. This3/8-16 bolt attaches the coil bracket to various places on the engines. Either on the intake manifold or the cylinder head. Will fit stock Ford cast iron intakes as found 1967-73. AMK bolt B-13722.

$0 Price: $7.88

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41021 -

Replaces Ford Part # C9OZ-6065-B

$0 Price: $4.58

Buy Details

Availability: In-Stock Item
Item #: 41013 -

Sold individually. Replaces Ford Part # C9OZ-6065-A

$0 Price: $4.00

Buy Details

Availability: In-Stock Item
Item #: 33374 -

Cylinder head bolt for any 1967-70 Ford 390 or 428CJ engine. This is for one long cylinder head bolt only. Longer of the two head bolts. Sold individually, 10 short and 10 long needed for a complete engine installation. See related items for short, bolt and kit or set of 20 bolts for 390 / 428CJ engines.

$0 Price: $4.00

Buy Details

Availability: In-Stock Item
Item #: 33373 -

Cylinder head bolt for any 1967-70 Ford 390 or 428CJ engine. This is for one short cylinder head bolt only. Shorter of the two head bolts. Sold individually, 10 short and 10 long needed for a complete engine installation. See related items for short, bolt and kit or set of 20 bolts for 390 / 428CJ engines.

$0 Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 41245 -

Four of these bolts are used to secure the isolator portion of the engine mounts to the 289/302/351 blocks. Includes 351W and 351C engines. 5/8" hex head bolt. Sold individually Concours phosphate & Oil (gray-black).

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 10347 -

Concours bolt for all 1968-70 Mercury Cougar and Ford products including Mustang radiator fan clutch to water pump. Sold individually, or in a set of 4. 1/2 inch hex head size an the threads are 5/16-24. This bolt is approximately 7/8" to the shoulder and 1-1/8" in total length.  Replaces Ford part # 380288-S. ...

$0 Price: $4.25

Buy Details

Availability: In-Stock Item
Item #: 41345 -

Bolt for installing the front bumpers on any 1969-70 Mercury Cougar or Ford Mustang. Threads into the front frame rails. 4 needed per car. Sold individually#56362-S

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11371 -

Used front crossmember bolt for the Mercury Cougar or Ford Mustang. It is crucial that you use this correct tapered bolt when installing the front cross member.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 41234 -

Reproduction zinc front shock bolt with correct anchor symbol on the head, just like the originals.Sold individually.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41019 -

Reproduction intake manifold bolt for the Mercury Cougar or Ford Mustang equipped with either the 390 or 428 engine. These little units are sold individually.

  • < Prev