Electrical & Lighting

New old stock Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a mercury  switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

After-market exact reproduction of the original Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a gravity switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

This kit is what we recommend to fully convert your 1967 Cougar over to LED Plasma exterior lights. Our WCCC brand LED lights are amongst the brightest on the market and have been specifically engineered with the nuances of the Mercury Cougar sequential system in mind. Keep in mind that over the years folks have become accustomed to very BRIGHT tail lights in traffic and the old incandescent bulbs are not only dim, but they take time to fully illuminate and a split second can make all the...

Contains nut and washer. Fits all Ford alternators. AMK F-644.

New fluorescent needle restoration paint for the gauges in your Mercury Cougar or Ford Mustang. Over the years, the sun has wreaked havoc on your Cat or Pony. This sun damage has also had it's way with the needles on you gauges and washed them out. This true fluorescent paint will not only make your needles look factory fresh, but will also bring back their glow at night. One jar contains 2.25ml worth of paint.

This XR7-G Lucas Square 8 light is in average condition with pitted glass, missing plug ends, and pitted spacers. *NOTE* The lens shown is actually mounted upside down for Cougar use.

C7ZB-17664-A Foot operated electric wiper actuating device for engaging the windshield washer pump or to cycle your windshield wipers once manually in light rain. Ford MPC number C7ZZ-17664-A. For any 1967 - 1968 Mercury Cougar and Ford Mustang.NOTE: If your electrical points are fried, you can simply replace them with the used contact replacement kit.Please note the Core deposit ...

Reproduction 22" pigtail for the 67-69 front turn signal wiring harness. Please Note: The Cougars are wired differently than some Mustangs. On some Mustangs the brown wire goes to a male plug.   This plug is a reproduction of the Cougar plug. Here is an example from the reproduction tail light we sell showing the difference: For installation on a Cougar, match up: Black Wire Black Wire Light Blue Wire Light Blue / Off White Wire Brown Wire Brown Wire ...

***WARNING*** Plugging these directly into a Cougar wiring harness without correctly re-wiring in the pigtails may fry your wiring harness! Reproduction driver side (left hand) and passenger side (right hand) front turn signal / parking light assemblies for the Ford Mustang. The plug is not correct for the Mercury Cougar's wiring harness and will need to be changed to work properly. However, this is an easy straightforward process which we lay out below. Plus you can save a good amount of that...

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, sold individually. Replaces Ford part #: C5ZZ-13207-B.

Used driver side parking light / turn signal retainer. Ford part #: C5ZZ-13207-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, sold individually. Replaces Ford part # C5ZZ-13206-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

Used passenger side parking light / front turn signal retainer. Ford part # C5ZZ-13206-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, Sold as a pair. Replaces Ford part #: C5ZZ-13206-B and C5ZZ-13207-B.

Reproduction driver side (left hand) and passenger side (right hand) front turn signal / parking light assemblies for the Mercury Cougar. These units come with the correct amber bulbs, clear lenses and have the original working wiring pigtails already spliced in. These are sold as a pair only. Keep in mind there were slight variations between 1967 and 1968 (a simple A clip on the wiring harness). We no longer carry both versions, we use the same wiring on both years. If you would like to...

Made from original Ford tooling, perfect in every detail down to the FoMoCo logo. Sold individually, two required per car. Clear lens for 1967-68 Mercury Cougar, Amber lens for Mustang. Screws sold separately, you can find them here. Replaces Ford part # C7WY-13208-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential...

New Old Stock front turn signal lens for 1967-68 Mercury Cougar.  Sold individually, two required per car. This is a factory clear lens for the Cougar, which used an amber light bulb. Mustangs used an amber lens and a unfiltered light bulb. Screws sold separately, you can find them here. Replaces Ford part # C7WY-13208-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's...

C8OZ-14A187-A Unique 1/4"-20 bolt for attaching the fuse blocks. 69 70 71 72 73 Mercury Cougar Ford Mustang fuse panel attaching bolt. Includes "C" clip and spring as shown. "C" clip keeps the bolt in the black fuse block.

C6OZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness. 67 68 Mercury Cougar Ford Mustang, additional application are 1966-67 Ford Fairlane, Ranchero, Mercury Comet fuse panel.

C8OZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness. 69 70 Mercury Cougar Ford Mustang fuse panel. Sometime in the later part of 1972 Ford switched to a nearly identical brown fuse block.

D1ZZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness.72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

C6OZ-14A068-GRADEB Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 67 68 Mercury Cougar Ford Mustang, additional application is 1966-67 Ford Fairlane, Ranchero, Mercury Comet fuse panel.

C8OZ-14A068-GRADEB Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 69 70 71 72 Mercury Cougar Ford Mustang fuse panel. Sometime in the later part of 1972 Ford switched to a nearly identical brown fuse block.

D1ZZ-14A068-A GRADE B Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

Used fuse block / box with wiring pigtail for the under dash harness for your Mercury Cougar Standard and XR7. This fuse block has a pigtail where the individual fuse holders and wires can be removed. This is also part of the 14401 main under dash wiring harness.Ford part # C6OZ-14A068-A.

C8OZ-14A033-C Brass clip with accessory terminal for attaching the accessory lead wire with multi connector. Attaches to all 1969-70 fuse blocks found on Mercury Cougars and Ford Mustangs. Accessory feed terminal for such things as 1969 swing away steering column, rear window defogger, speed or cruise control, etc. Includes fuse block mounting hardware.

Reproduction Accessory wire with Buss bar for the accessory terminal found optionally on 1969-73 Mercury Cougar and Ford Mustang fuse blocks. Lead comes with factory molded style triple female connector for plugging in the various accessories such as 1969 swing away steering column, rear window defogger, speed or cruise control, etc. Wire length is just over 9 inches in length.

This is actually the correct 2 inch screw for the 1968, as opposed to the 1 3/4 inch screw that would have come in the 67. With the added length this screw is less likely to pull out of the firewall than the 67 screw was. Fits Standard and XR7. Sold individually.

This fusible link is a section of wire connecting the starter solenoid on one end and wiring harness that passes through the firewall to mate with the top switch wiring. Correct for power sunroof equipped Cougars. May also work for XR7 and Standard convertibles.

New Old Stock Ford small block Ford distributor shaft to engine block gasket, made of rubber. Fits all 260, 289, 302, 351w, 351c engines. 1959-76. This is a "O" ring rubber washer. Will not fit big block FE, 360, 390, 410, 427, 428 engines. Ford part number B9TF-12143-A.

New Old Stock Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

Good used lens, will need polished but no cracks or deep scratches.Check out the video below on our new gauge tester: Check out our video on replacing the fuel system on a '68 Cougar! ...

Background paint is not sun damaged and is guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge. Check out the video below on our new gauge tester: ...

Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge.Check out the video below on our new gauge tester: ...

Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly from a 1969 Mercury Standard Model. Bench tested and working fuel gauge. 1969 fuel gauges do not have any lettering on the warning lights. 1970 has the white lettering on "ALT" and "PARK" warning lights. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly from a 1970 Mercury Standard Model. Bench tested and working fuel gauge. 1970 has the white lettering on "ALT" and "PARK" warning lights as shown.Check out the video below on our new gauge tester: ...

Functions well but face is faded. It is easy to replace this face with your existing good face.Check out the video below on our new gauge tester: ...

Used Fuel Gauge for the XR7 1971 - 1973 Mercury CougarCheck out the video below on our new gauge tester:   ...

Used analog style fuel gauge for all 1969-70 Mercury Cougar XR7 and Mercury Cougar Eliminator. Bench tested and working gauge. Ford marking on the gauge C9WF-9306, Ford MPC number C9WY-9280-B.Check out the video below on our new gauge tester: ...

NOS gauge for any 1967-68 Standard Model Cougar. This combination gauge is a fuel and temperature gauge all in one with an oil and amp "idiot" lens on either side. Both gauges are guaranteed to work good. New Old Stock gauge or 'pointer dial' as the box says. NOS C7WY-9280-A. Check out the video below on our new gauge tester: ...

Comes with lens, background paint is not sun damaged. Guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.Check out the video below on our new gauge tester: ...

This gauge works fine but the paint has gone bad. You can use your existing good face to combine with this gauge and save money.Check out the video below on our new gauge tester: ...

Good used accurate gauge.Check out the video below on our new gauge tester:

Good used Grade A unit that has never had the odometer tampered with. Check out the video below on our new gauge tester: ...

Good used Grade B unit that has never had the odometer tampered with. Grade B's will have fading face paint and will need to be touched up. Check out the video below on our new gauge tester: ...

Rebuilt tachometer for your 1971 - 1973 XR7 Cougar. Check out the video below on our new gauge tester: ...