Exterior Lights

This lens comes without the correct FoMoCo logo, sold individually. Replaces Ford Part # C5ZZ-15514.

Sold individually. Stainless Steel

We are excited to bring these new reproduction chrome backup light bezels for the 1969 and 1970 Mercury Cougar to the market. The sockets, pigtails and lenses are not included so you will need to gently remove your originals and install them in these bezels. You can find the lenses here.

We are excited to bring these new reproduction assemblies for the backup lights for the 1969 and 1970 Mercury Cougar to the market. Includes a pair of bezels with lenses and gaskets. The sockets and pigtails are not included so you will need to gently remove your originals and install them in these bezels.NOTE: We've been informed that the reproduction lenses will need a bit of filing and sanding to properly fit into these reproduction bezels.

This kit is a time and money saver. Quality chrome bezels and all related parts are included. This is a direct plug-in, no modifications needed.

Hassle free kit makes it easy to install backup lamps. This kit includes mounting pads, lenses, gaskets, T1142 Bulbs and mounting hardware.

Great chrome on this reproduction backup / reverse light for the driver side (left hand) of the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15512.

Great chrome on this reproduction backup / reverse light for the passenger side (right hand) of the the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15511.

Reproduction backup light mounting spacers for the Mercury Cougar or Ford Mustang.

Sold as a pair, we suggest you send your cores in advance or at least email us several good quality images if your cores are questionable. If your cores are heavily pitted, cracked or the studs have been over tightened (causes part to dimple / warp) then your cores are not acceptable for restoration. The casting number as seen from the back reads C9WB-15A509-B and C9WB-15515-B. Ford Part # is C9WY-15500-B and C9WY-15500-A

Used driver side (left hand) rear marker light bezel for any 1971-73 Mercury Cougar. Originally painted body color, flush mounted to the passenger side rear quarter panel. Has two attaching studs, and sometimes one locating stud. We often times find that the locating stud is broken or cut off. You will want to cut the corner stud off if using the available reproduction Mustang red rear reflectors. All of our bezels will have the 2 larger studs intact. See related items for new lenses and...

Used grade "B" passenger side (right hand) rear maker light bezel for the Mercury Cougar. We find that these are usually in better condition than the fronts, so we can offer you better quality at a lower price than we can the fronts. These same bezels can also be found on other full size 1970 Mercurys. Ford part # D0MB-15A466-A.

Used passenger side (right hand) rear marker light bezel for any 1971-73 Mercury Cougar. Originally painted body color, flush mounted to the passenger side rear quarter panel. Has two attaching studs, and sometimes one locating stud. We often times find that the locating stud is broken or cut off. You will want to cut the corner stud off if using the available reproduction Mustang red rear reflectors. All of our bezels will have the 2 larger studs intact. See related items for new lenses and...

Used grade "B" driver side (left hand) front side marker bezel for the Mercury Cougar. The 1970 Ford Torino and Maverick units look similar, but do not have the same angle or depth as the Cougar. These bezels are also unique to the 1970 Cougar. We do not have any of these bezels in "mint" condition, all of our lights will have minor blemishes like the unit shown. Ford part # D0WB-15A441-A.

Used grade "B" passenger side (right hand) front side marker bezel for the Mercury Cougar. The 1970 Ford Torino and Maverick units look similar, but do not have the same angle or depth as the Cougar. These bezels are also unique to the 1970 Cougar. We do not have any of these bezels in "mint" condition, all of our lights will have minor blemishes like the unit shown. Ford part # D0WB-15A440-B.

NOS bezel for the side marker lights on the Mercury Cougar or Ford Mustang. This is an original Ford replacement part. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars. Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Used grade "B" driver side (left hand) rear maker light bezel for the Mercury Cougar. We find that these are usually in better condition than the fronts, so we can offer you better quality at a lower price than we can the fronts. These same bezels can also be found on other full size 1970 Mercurys. Ford part # D0MB-15A466-A.

Reproduction bezel for the side marker lights on the Mercury Cougar or Ford Mustang. This unit features the correct contour that fits the car perfectly where other reproductions are often flat. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars. Includes speed nuts.Replaces Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Used bezel for the side marker lights on the Mercury Cougar or Ford Mustang. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars.  Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Ford part # C9WB-13504 for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem?...

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Driver side chrome tail light door or bezel. Ford part # D0WB-13504-A for the driver side. *NOTE* Need...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts.Ford part # C9WB-13449 for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts. Ford part # D0WB-13504-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

Grade "A" passenger side (left hand) bezel with no pitting, ready to install and use as-is. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. Check out this video ...

Good used passenger side (right hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Passenger side chrome tail light door or bezel. Ford part # D0WB-13449-A for the passenger side....

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts.Ford part # C9WB-13449 for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts. Ford part # D0WB-13449-A for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

Driver side (left hand) front turn signal bezel for any 1969-70 Mercury Cougar. Our best quality bezels have no obvious pitting, scratches dents. Easy to detail part, polishing with fine steel wool, and an application of semi-gloss black paint and they will look great! Applications include 1969-70 Mercury Cougar, 1969 - 1970 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets. Ford part # C9WY-13210-A...

Passenger side front turn signal bezel for any 1969-70 Mercury Cougar. Our best quality bezels have no obvious pitting, scratches dents. Easy to detail part, polishing with fine steel wool, and an application of semi-gloss black paint and they will look great! Applications include 1969-70 Mercury Cougar, 1969 - 1970 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets.Ford part # C9WY-13210-A for the...

Used grade "A" driver side (left hand) backup / reverse light bezel / housing for the Mercury Cougar. Our bezels are the best we can find with no cracks or pits. The chrome will be bright and almost completely free of lines or speckles. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for the unrestored, low mile car that you...

Used grade "B" driver side (left hand) backup / reverse light bezel / housing for the Mercury Cougar. These bezels may have slight cracks and pits in the chrome. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for a driver quality car. No exchange needed on this unit.Ford part # C9WB-15500-B. Cougar Buying Guide ...

Used grade "A" backup / reverse light bezel / housing for the passenger side (right hand) of the Mercury Cougar. Our bezels are the best we can find with no cracks or pits. The chrome will be bright and almost completely free of lines or speckles. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for the unrestored, low mile car...

Used grade "B"  backup / reverse light bezel / housing for the passenger side (right hand) of the Mercury Cougar.  These units may have some cracks and pitting in the chrome. There will most likely be thin chrome on the outer edges and other blemishes in the chrome. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. These are perfect for the daily driver quality car. No exchange needed. Ford part # C9WY-15500-A. *NOTE*...

Beautifully reproduced set of chrome driver and passenger side taillight bezels for the 1969 Mercury Cougar. Replaces Ford part # C9WB-13504 for the driver side. Replaces Ford part # C9WB-13449 for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here...

Reproduction pair of parking light bezels. Applications include 69 - 70 Mercury Cougar, 1969 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, 71 - 72 Maverick Grabber, 1973 - 1974 Maverick (until 8/12/74) and 1971 - 1974 Comet. Replaces Ford part # C9WY-13210-A for the passenger side, C9WY-13212-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned...

Good used pair ready to be cleaned and installed with no obvious blemishes. Applications include 1969-70 Mercury Cougar, 1969-70 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets. Ford part # C9WY-13210-A for the passenger side, C9WY-13212-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic...

Driver side rear mounting bracket for the 1970 Mercury Cougar front fender side marker lights. They will not be bent or heavily rusted. The drivers side has an engineering number of D0WB-15A431-A and the passenger side has the number D0WB-15A**** stamped into it.

Passenger side rear mounting bracket for the 1970 Mercury Cougar front fender side marker lights. They will not be bent or heavily rusted. The drivers side has an engineering number of D0WB-15A431-A and the passenger side has the number D0WB-15A**** stamped into it.

Great Reproduction of an Often Broken Part. This part fits on the bottom of the steering wheel and must be in place to cancel your turn signal on tilt column cars. Used on all Ford products with a tilt column 1967-69. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here...

Factory original turn signal canceling cam. Originals were molded in white, reproductions are molded in black. Repros also available from us. Without this part that self attaches to the back of your factory steering wheel, you will be turning off your blinkers manually. Click up, click down... *NOTE* We have no good reason to encourage you to purchase this hard to find original over the reproduction, unless you just gotta have it. **NOTE** Need help diagnosing a Cougar turn signal problem?...

Used in 1968 Mercury Cougars for the sequential motor, located under the dash on a panel next to the fuse block.15amp circuit breaker, not clearly identifiable in the Ford MPC. It is 1.07" x 0.40" and has a single green dot. Box is marked Tung Sol, 15AMP 12V, and made in the U.S.A. Integrated mounting tab for this application. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's...

Used in 1967 Mercury Cougars for the stop lamp switch, located under the dash on a panel next to the fuse block.15amp circuit breaker, not clearly identifiable in the Ford MPC. It is 1.07" x 0.40". Box is marked 15AMP 12V, and made in the U.S.A. Integrated mounting tab for this application. The MPC shows this circuit breaker was also used on 1965-66 Continental convertible and 1965 Thunderbird convertible. These are tested and guaranteed to work.*NOTE* Need help diagnosing a Cougar turn signal...

Used in 1969-70 Mercury Cougars for the stop lamps, located under the dash on a panel next to the fuse block.15amp circuit breaker. It is 1.07" x 0.40" and has a single green dot. Box is marked Tung Sol, 15AMP 12V, and made in the U.S.A. Integrated mounting tab for this application. Also fits 1969 and newer Mercury full size, 1970-71 CycloneFord part number C9MY-14526-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the...

Used in 1971-73 Mercury Cougars and Ford Mustang for the stop lamps, located under the dash on a panel next to the fuse block.15amp circuit breaker. It is 1.25" x 13/16" and has a single green dot. Box is marked FASCO, 15AMP 12V, and made in the U.S.A. Integrated mounting tab for this application. Ford part number D1MY-14526-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the...

This clip mounts the actuator shaft to the eyelids. Two required for 1967 - 1968, one required for 1969 - 1970. Same clip holds the windshield wiper motor to the wiper transmission.

Used driver side tail light diffuser for the Mercury Cougar. Also called a reflector. Replaces Ford part number C9WY-13A565-B.

Used passenger side tail light diffuser for Mercury Cougar. Also called a reflector, fits all 1969-70 Mercury Cougars.Replaces Ford part number C9WY-13A565-A.

3/4" wide and 60' long. This tape resembles the tape you would find on bicycle handle bars or a hockey stick but is in fact different. The taillight harness uses this type of tape as well as portions of the under dash harness. Not used in modern applications and getting rather hard to find these days.NOTE: This is FRICTION tape not adhesive tape. It is coated with rubber and relies on friction with itself to wrap wires. It does not stick to the wires. This was one of the first types of...