Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 82
$0 Price: $27.15

Buy Details

Availability: In-Stock Item
Item #: 42013 -

This 1965 Mustang alignment pin is not correct for the 1969 to 1973 Cougar but it will work. See the image to the left to see the comparison to an original 69 pin.

$0 Price: $179.87

Buy Details

Availability: In-Stock Item
Item #: 31754 -

C5ZZ-7610962-A Ford description of this plate is "Plate - Front floor lower cross member". All 1969-73 Cougar convertibles and all 1965-73 Ford Mustang convertibles use this plate. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Some time between 1969 and 1973 this plate underwent a revision by Ford. We are going to split by generation. 1969-70 plates are flat on one edge. 1971-73 has a slight hump or bend. Either works and...

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 11377 -

These are about half the weight of originals and do not look correct in any way. They are far better than nothing. Bolts to the left hand and right hand lower floor reinforcement panels. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Replaces Ford Part # C5ZZ-7610962-A. The Ford description of this plate is "Plate - Front floor lower cross member". All 1969 - 1973 Cougar convertibles and all 1965 - 1973 Ford Mustang...

$0 Price: $249.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25090 -

This is the storage bag that the convertible top cover folds into when the top is in the down position. Ford calls this part the "Folding top dust hood container." It is made from common vinyl top material and is always black. It measures 15"x27" and the bottom portion is sometimes, tapered down to 8". The same design was used for many Ford Products of the day including Torino, Montego and others. Current offering does not have a tapered bottom, it is square. Pictures will show both styles...

$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31493 -

Rear most convertible top bow #4, from a 1971-73 Mercury Cougar or Ford Mustang convertible top assembly. This is the last bow and would have had a tack strip attached.   Ford part number D1ZZ-7651278-A.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22989 -

Used bracket for installing the rear interior panels on any 1971-73 Mercury Cougar or Ford Mustang convertible. One bracket per side. These brackets will have a bit of dirt and or rust on them, originally painted chassis black. Replaces Ford part number D1ZZ-76310A84-A. 

$0 Price: $12.87

Buy Details

Availability: In-Stock Item
Item #: 13117 -

Reproduction front tack strip for the front bow of the convertible top on the Mercury Cougar or Ford Mustang convertible. When replacing your convertible top, it's also a good idea to replace the tack strips in the front and rear bows of the convertible top frame. This strip slips into the front bow of the convertible top's frame and allows the fabric of the top to be attached to the frame. You will need approximately 5 feet (60 inches) of material and will have to trim the tack strip to fit...

$165.00 Price: $191.67

Buy Details

Availability: In-Stock Item
Item #: 42211 -

Galvanized three piece replacement tack strips for the 1971 - 1973 Cougar convertible. Over-sized, must be shipped via UPS.

MSRP:$165.00
$165.00 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31863 -

Original used three piece tack strips for the 1969 - 1970 Cougar convertible. Over-sized, must be shipped via UPS.

$0 Price: $12.87

Buy Details

Availability: In-Stock Item
Item #: 13672 -

Reproduction tack strip for the rear bow of the convertible top on the Mercury Cougar or Ford Mustang convertible. When replacing your convertible top, it's also a good idea to replace the tack strips in the front and rear bows of the convertible top frame. This strip slips into the rear bow of the convertible top's frame and allows the fabric of the top to be attached to the frame. You will need approximately 5 Feet (60 inches) of material and will have to trim to fit your top. You can also...

$469.00 Price: $476.15-$1,410.77

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 71-72-73-Conv-Tops -

Currently, Convertible Tops dropshipped from this supplier will not ship for 4-6 weeks. The original tops would have been double texture PinPoint Vinyl. There are 3 different materials currently offered for these premium tops. Single Texture PinPoint Vinyl (GOOD): This is the material that is offered by almost all Mustang Vendors and it looks the same on the surface as an OEM top. This is a two-ply composite which has an outer layer of canvas-looking PVC vinyl plastic, and an inner layer of...

$0 Price: $272.31

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15320 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling.  See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps, so any boot that comes with snaps is not...

$0 Price: $76.95

Buy Details

Availability: In-Stock Item
Item #: 11589 -

Used to cushion and protect top vinyl from excessive wear from side rails. Replaces Ford part #: D1ZZ-7652875.

$0 Price: $195.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16743 -

Passenger side inner convertible top rail extension, made of cast aluminum. One of the most fragile parts on the convertible top assembly. Prone to failure when one of the hydraulic cylinders fails and the top assembly is forced. Comes as shown, be sure to save all of your installation hardware and bushings. Casting number on part reads: D1ZB-76531A08-A.

$0 Price: $125.45

Buy Details

Availability: In-Stock Item
Item #: 25906 -

Retainer and screws used to retain the header seal.Fits:1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar1971 Ford Mustang1972 Ford Mustang1973 Ford Mustang

$0 Price: $218.55

Buy Details

Availability: In-Stock Item
Item #: 42117 -

This is an inexpensive top that is only recommended if you car is going to be stored indoors. Have you ever wondered how a convertible top is installed, or maybe considered trying it yourself? Check out our in-depth installation video below! ...

MSRP:$35.00
$35.00 Price: $29.09

Buy Details

Availability: In-Stock Item
Item #: 13878 -

New to the Market! Correct convertible side tension cables for the 71 through 73 Cougar and Mustang.  Replaces Ford Part #: D1ZZ-652806-A.  

$0 Price: $195.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16229 -

Driver side inner convertible top rail extension, made of cast aluminum. One of the most fragile parts on the convertible top assembly. Prone to failure when one of the hydraulic cylinders fails and the top assembly is forced. Comes as shown, be sure to save all of your installation hardware and bushings. Casting number on part reads: D1ZB-76631A09-A.

$0 Price: $195.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33680 -

Driver side convertible rear top rail, made of cast aluminum. One of the most fragile parts on the convertible top assembly. Prone to failure when one of the hydraulic cylinders fails and the top assembly is forced. Comes as shown, be sure to save all of your installation hardware and bushings. Sometimes there may be a broken screw for the cable that will need to be drilled out.  Casting number on part reads: D1ZB-7653139-AB.

$0 Price: $195.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33681 -

Passenger side rear convertible top rail, made of cast aluminum. One of the most fragile parts on the convertible top assembly. Prone to failure when one of the hydraulic cylinders fails and the top assembly is forced. Comes as shown, be sure to save all of your installation hardware and bushings. Very hard part to find unbroken, sometimes the screws break off for the cables. You may have to drill out a broken screw.  Casting number on part reads: D1ZB-7653138-AB.

$0 Price: $264.63

Buy Details

Availability: In-Stock Item
Item #: 15324 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling. See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps (except the 6 on the interior panels), so any...

$0 Price: $264.63

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15321 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling. See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps (except the 6 on the interior panels), so any...

$0 Price: $209.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15325 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling. See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps (except the 6 on the interior panels), so any...

$0 Price: $1,099.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30147 -

No excuses 100% complete mechanism with no cracks, missing parts or heavy corrosion. We can include the top cylinders but will not guarantee they will not leak. We carefully break this down by removing the header and crossbows and placing the original bolts back in the holes. Once you get this from UPS it will be very evident how it goes back together.

$0 Price: $30.87

Buy Details

Availability: Out of Stock
Item #: 31803 -

Used convertible top flapper stopper. Technically called a "lasting", this is the thin strip of 1/16" thick metal that slides inside the sleeve of your convertible top to keep it from flapping. We will rarely have these on hand, so we've included the dimensions so that you can fabricate your own if needed. 2 required per vehicle.

$0 Price: $535.45

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11411 -

Reproduction clear four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with power windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

$0 Price: $680.05

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11409 -

Reproduction tinted four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with manually operated windows. This set does not include any window trim so save your for reuse. There are three versions of this glass. The clear version is just that

$0 Price: $680.05

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11410 -

Reproduction tinted four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with power windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21601 -

Ground wire for convertible pump motor. Short wire section that attaches to the pump motor and grounds to the chassis of any 1969-73 Mercury Cougar or Ford Mustang. Easy to copy, #10 gauge wire about 11-1/2 inches long. Two ring terminals attached. Easy peasy.

$0 Price: $285.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13004 -

This used header will not be perfect as you can see from the pictures but it can be restored with some TLC. The part you get will be solid, we will not send you junk.Ford Casting Number: D1ZB-76514A72-AA

$0 Price: $2.55

Buy Details

Availability: In-Stock Item
Item #: 31726 -

Bolt for the under side convertible plate on any 1969-73 Mercury Cougar or Ford Mustang. 6 total bolts needed for attaching reinforcement plate to undercarriage. Sold individually. These are a close match to the original bolts, which are 3/8-16 x 1-1/2". Ford tightening specs. are 25-38 lbs. ft. torque.Replaces Ford number 57048-S2.

$0 Price: $89.09

Buy Details

Availability: In-Stock Item
Item #: 19657 -

Exact fit, not generic 'One Size Fits All' hoses. Quality high pressure fittings. Contains both upper and lower Hydraulic Hose for a 1971, 1972 or 1973 Mercury Cougar or Ford Mustang Convertible Hydraulic CylinderClick on images to enlarge.

$0 Price: $118.18

Buy Details

Availability: In-Stock Item
Item #: 41975 -

Reproduction hydraulic cylinder for the Mercury Cougar or Ford Mustang convertible equipped with the power top. Includes pictured pivot bushings.* - According to the manufacturer and the Ford Master Parts Catalog, 1971 Mustang would have originally used the passenger side cylinder (D1ZZ-7650600-A) for both sides.Replaces Ford Part #: D1WY-7650601-A, D2ZZ-7650601-A

$0 Price: $118.18

Buy Details

Availability: In-Stock Item
Item #: 41965 -

Reproduction hydraulic cylinder for the Mercury Cougar or Ford Mustang convertible equipped with the power top. Includes pictured pivot bushings.* - According to the manufacturer and the Ford Master Parts Catalog, 1971 Mustang would have originally used the passenger side cylinder (D1ZZ-7650600-A) for both sides.Replaces Ford Part #: D1WY-7650600-A, D1ZZ-7650600-A, D2ZZ-7650600-A

$0 Price: $172.75

Buy Details

Availability: In-Stock Item
Item #: 12098 -

Reproduction driver side (left hand) convertible top latch assembly for the Mercury Cougar or Ford Mustang.  

$0 Price: $172.75

Buy Details

Availability: In-Stock Item
Item #: 12099 -

Reproduction passenger side (right hand) convertible top latch assembly for the Mercury Cougar or Ford Mustang.  

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12432 -

Used convertible top latch handle for the driver side (left hand) for the Mercury Cougar or Ford Mustang.Ford part # D1ZZ-7650509-A , casting # D1ZB-7650509-A

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12433 -

Used convertible top latch handle for the passenger side (right hand) of the Mercury Cougar or Ford Mustang.Ford part # D1ZZ-7650508-A , casting # D1ZB-7650534-AA

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33387 -

Used bracket for installing the vertical seat cushion on a 1971-73 convertible Mercury Cougar or Ford Mustang. Two required per car, sold individually. Not sure of the Ford number, this part went obsolete many years ago. Please take multiple measurements of the location of your old brackets prior to removal. 

  • < Prev