All Products

Right side axle, 28 spline 31-7/8 inch length. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. *Note 429 CJ equipped Cougars came with heavy duty 31 splined axles.

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare 8 inch axle housing with proper axle pad spacing, vent location, brake line attaching, and fill plug in third member. Over-sized shipping length.

This kit is a time and money saver. Quality chrome bezels and all related parts are included. This is a direct plug-in, no modifications needed.

Oil pan baffle as found on all 1969-70 Ford and Mercury products with R or Q code 428CJ or 428SCJ engines. This baffle is sandwiched between the oil pan and the block.

C7ZF-9600-C Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. 49 state open PCV system. No dents, dings, rust or other damage. *Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.*Excludes California. Ford part number C5ZZ-9600-D. Notice the lack of metal elbow for venting back to the oil filler cap. Click on images to...

D0ZF-9600-M Air cleaner base for all 351C engines, both H code 351C-2V and M code 351C-4V engines. Could also be found under casting number D0ZF-9600-Z. About 17-3/4" inches in diameter (although the Ford MPC shows it to be 17.00 inches). *Excludes 1970 351-2V Windsor engines. Ford part number D0ZZ-9600-M.

D0ZF-9600-B Air cleaner base for 1970 H code 351-2V Windsor engines. About 17.84" inches in diameter. Ford part number D0OZ-9600-B. *Excludes 351C Cleveland engines. Click on images to enlarge. ...

Reproduction battery heatshield that fits many applications from 70-73, on most hi-performance engines. It was often the first part discarded but serves a real purpose.

Good used group 24 tray for 1968-70 Mercury Cougar or Ford Mustang. Assembly line installed group 24 battery tray, for those that want to keep it very original, this is getting to be a hard to find part with no rot (will show pitting).

This is what I consider to be "Premium Quality". Very correct in every detail and made in the US! The group 27 larger tray was optional on any Cougar and standard on big block Cougars. Replaces Ford part # C9ZZ-10732-AR

NOS service replacement battery tray, may not be exactly like the assembly line tray. Group 27 battery tray is typical for cars with air conditioning and higher amp alternators. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars.  Replaces Ford Part #: D0OZ-10732-B.

C9ZP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1969 Mercury Cougar and Ford Mustang with 351 engine and automatic FMX transmission, code X on your door data plate tag.

D2OZ-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1972 - 1973 Mercury Cougar and Ford Mustang with 351 engine and automatic FMX transmission, code X on your door data plate tag. Ford master part number D2OZ-7976-A.

Manual transmissions, include both 3 and 4 speed Top Loader transmissions. Ford part number C5TA-6394-A. For use with any 351 Windsor or 351 Cleveland engine for the years 1969 and 1970. Cast iron construction, for use with 164 tooth flywheels. Shipped bare, no hardware or clutch fork. Search words: 69 70 H M code engine Eliminator XR7 Sport Special

Correct for 1971, 1972 and 1973 only. 351-2V and 351-4V engines , including Boss 351 for 1971 - 73. Ford part number D1TZ-6392-A and D1TZ-6392-C. Shipped bare, no hardware or clutch fork.

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough to do both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

NOTE: At the moment the supplier is only making the late model version of this beltline kit. The late version has a slight bend in the chromed quarter piece, whereas the early version is straight (see photo above). Made With Exact Materials As Original. Eight piece kit that includes inner and outer belt-line, enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Grade A used A/C center vent for XR7 (non Standard) model Cougars. These will have some minor chrome blemishe in the plating, but no heavy pitting or damage. Fits the XR7 model (65B) Cougars with woodgrain dash faces. See our other listing for Grade B versions of this air conditioning center register or vent. *Note - Will not fit Standard model Cougars. Replaces Ford number C7WY-19893-D.

Reproduction A/C center vent for XR7 (non Standard) model Cougars. These are great quality vents with bright chrome finish. Fits the XR7 model (65B) Cougars with woodgrain dash faces. *Note - Will not fit Standard model Cougars. Replaces Ford number C7WY-19893-D.

Grade B used 1968 Mercury Cougar air conditioning chrome bezel, naked as shown. Some blemishes as shown. No extra parts included, levers and switches available. Does not come with the 1968 only detachable air vent. The 1968 Cougar electrical assembly manual indicates that this is part of C8WA-19A976-F Register and Control assy. (Bright Finish). Bright finish is Cougar, Ford Mustang bezels had black pebble grain or wood grain finishes attached. Ford casting number on reverse of this piece is...

Reproduction A/C center vent for standard (non XR7) model Cougars. These are great quality vents with bright chrome finish. Fits the standard model (65A or 65C) Cougars with padded dash face pads. *Plastic chrome vent plate included.*Note - Will not fit XR7 model Cougars.Replaces Ford casting number C7WA-19623 and C7WY-19893-A.

Dash color painted steel bezel that houses the courtesy lights on all 1969-70 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL ACCY. Sold pit free, often times we can select your desired color, but plan on detailing them if your undergoing a restoration. Mention your color in the comments section of your order. Replaces Ford part number C9WB-10964.

Dash color painted steel bezel that houses the courtesy switches with convertible top on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL TOP. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-A. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

Best used bezel we can find from a Western parts car. "Almost" pit free. If you look close you will see some tiny specs. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13064, and D3WY-13064-B.

Best used bezel we can find from a Western parts car. "Almost" pit free. If you look close you will see some tiny specs. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13052 and D3WY-13064-A.

Not faded, no scratches, show quality. Notice this 1970 part has the cut out for the larger diameter steering column.

This die cast bezel with a brushed finish was used from 1969 to the first part of 1970. This is a clean example with no pits or obvious scratches. The engineering number found on the back is C8AB-14505-B.

NOS radio bezel for the 1971 - 1973 Mercury Cougar. 

Replace that old, pitted, and cut up radio bezel with this quality concours part. This is a Mustang piece that will work on your Cougar but is slightly different. The easiest way to identify a Mustang bezel from a Cougar bezel is that Mustang had four mounting holes and Cougar had five. Will need slight modification to fit Cougar. Replaces Ford Part #: D1ZZ-18842-A.

This is a a grade "B" bezel that will have minor pitting and may be slightly modified in the radio knob area.Need some help getting that old unit out? Here’s some guidance from our buddy Randy Goodling.All 67-68 standard consoles had a storage compartment. The slide up doors are different between the 2 years due to the handle being different. The 67-68 Mustang console also had this slide up door. This slide up door works like the top on a roll top desk. In order to replace it the door must be...

This used bezel is covered almost entirely by the face pad with clock. Only the small area around the radio actually shows once installed. This early bezel has the upper support, the later version is open. Keep in mind we have bezels that have been altered for an after market radio for substantially less money.Ford casting number C7WB-6504567-B  68102-171Need some help getting that old unit out? Here’s some guidance from our buddy Randy Goodling.All 67-68 standard consoles had a...

This bezel is covered almost entirely by the face pad with clock. Only the small area around the radio actually shows once installed. This late bezel does not have the upper support, the early version is closed. Keep in mind that this grade "B" bezel will likely have one of the tabs broken or modified for an aftermarket stereo.Need some help getting that old unit out? Here’s some guidance from our buddy Randy Goodling.All 67-68 standard consoles had a storage compartment. The slide up doors...

Both our A and B quality bezels will need a replacement brushed aluminum overlay. This used bezel will have no broken or missing parts. Most likely the white will be missing from the P R N D 2 1. We also have grade "B" used units with minor flaws for less than half the price. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand...

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Ford part # C9WB-13504 for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem?...

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Driver side chrome tail light door or bezel. Ford part # D0WB-13504-A for the driver side. *NOTE* Need...

New Old Stock 1973 Mercury Cougar driver side tail light bezel, NOS. Ford part number D3WY-13489-B.

Restored driver side (left hand) 1971-72 Mercury Cougar taillight bezel. These have been restored with the correct bright dipped, anodize finish. You will have to do the finish, detail painting. Note that in the buffing process the ridges are worn down noticeably on the horizontal bars. Mercury part number D1WY-13489-B. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a used or core D1WY-13489-B trim. Call 503-463-1130 if you have any...

Restored driver side (left hand) 1973 Mercury Cougar taillight bezel. These have been restored with the correct bright dipped, anodize finish. You will have to do the finish, detail painting. Note that in the buffing process the ridges are worn down noticeably on the horizontal bars. Mercury part number D3WY-13489-B. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a used or core D3WY-13489-B trim. Call 503-463-1130 if you have any...

Good used passenger side (right hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Passenger side chrome tail light door or bezel. Ford part # D0WB-13449-A for the passenger side....

Restored passenger side (right hand) 1971-72 Mercury Cougar taillight bezel. These have been restored with the correct bright dipped, anodize finish. You will have to do the finish, detail painting. Note that in the buffing process the ridges are worn down noticeably on the horizontal bars. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a used or core D1WY-13489-A trim. Call 503-463-1130 if you have any questions.  Mercury part #...

Restored passenger side (right hand) 1973 Mercury Cougar taillight bezel. These have been restored with the correct bright dipped, anodize finish. You will have to do the finish, detail painting. Note that in the buffing process the ridges are worn down noticeably on the horizontal bars. Mercury part number D3WY-13489-A. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a used or core D3WY-13489-A trim. Call 503-463-1130 if you have any...