Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2449-2496 of 4620
$0 Price: $70.02

Buy Details

Availability: In-Stock Item
Item #: 14077 -

Aftermarket hoses without original Ford markings. The only difference between this hose and the 1972 - 1973 hose is the length. This works for a 351, will not work for a 429. It is longer to accommodate the loop through the bracket on top of the export brace under the hood. Made in the U.S.A. Approximate length - 60" Replaces Ford Part #: D1ZZ-3A719-C Click this link for more clarity on power steering hoses: https://secure.cougarpartscata... ...

$0 Price: $47.18

Buy Details

Availability: In-Stock Item
Item #: 14333 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to stripping if you torque them to the specs called for by FORD. We do not recommend these hoses and can not stand behind them as they often will leak if not torqued to the proper...

$0 Price: $74.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33284 -

This listing is for the momentary rocker switch that operates the power sunroof on the 1968 XR7G and is located in the center console. 1968 Cougars equipped with a power sunroof that were not an XR7G utilized the power top switch from a 1968 Mustang convertible.Ford part number C8SB-14540-A

$0 Price: $31.64

Buy Details

Availability: In-Stock Item
Item #: 32190 -

This gear was used on Cougars starting in 1969 and then Mustang in 1971. Fits pretty much every (common) Ford power window motor except for the unique "pancake" style motors found with the 1/4 windows on the Cougar and Mustang. Includes metal plate as shown. Replaces Ford part # D0AZ-62234A24. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! 1969...

$0 Price: $31.15

Buy Details

Availability: In-Stock Item
Item #: 14214 -

Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This is the upper pressure hose, or the pump end only. Lower pressure hose Replaces Ford Part # : D0OZ-3A719-C Click this link for more clarity on power steering hoses: https://secure.cougarpartscata...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27300 -

This used tube with two flared fittings was originally used to connect the flexible pressure hose to the power steering pump on all 1971-73 Mercury Cougar and Ford Mustang with V8 engines. Ford shows this item in the chassis assembly manuals and it is called a "Pressure Line Outlet Tube Assembly" and the Ford part number is D1ZA-3E576-AC.

$0 Price: $95.27

Buy Details

Availability: In-Stock Item
Item #: 32018 -

Reproduction printed circuit board. Fits all 1971 - 73 Mercury Cougars, XR7 (65F & 76F) and Standard (65D & 76D) models.Check out the video below on our new gauge tester: ...

$0 Price: $98.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0109 -

Perfect condition with no burns, breaks and is not separating. Fits all 1971-73 Mercury Cougars, XR7 (65F & 76F) and Standard (65D & 76D) models.Check out the video below on our new gauge tester: ...

$0 Price: $82.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0105 -

Ford part number C9WY-10K843-A Whereas the engineering number printed on the backside of this PCB is the same red vs blue there is a distinct difference. Many people get confused with the numbers printed or cast into parts thinking that that is a part number when really it is a casting number or engineering number and may or may not resemble the actual part number listed in the MPC (Master Parts Catalog). 1969 Standard Cougars used the blue PCB (printed circuit board)until 2/17/69. Late model...

$0 Price: $82.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0107 -

Ford part number C9WY-10K843-C Whereas the engineering number printed on the backside of this PCB is the same red vs blue there is a distinct difference. Many people get confused with the numbers printed or cast into parts thinking that that is a part number when really it is a casting number or engineering number and may or may not resemble the actual part number listed in the MPC (Master Parts Catalog). 1969 Standard Cougars used the blue PCB (printed circuit board) up until 2/17/69 and...

$0 Price: $98.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0108 -

Good used PCB that has no burns, corrosion or separating areas. The red PCB (printed circuit board) was used in the latter part of 1969 (from 2/17/69 on) and all of 1970. In 1969 if you had a white plug connected to the PCB it used a red PCB, if you had a black plug the blue PCB was used. Check out the video below on our new gauge tester: ...

MSRP:$109.99
$109.99 Price: $95.27

Buy Details

Availability: In-Stock Item
Item #: 46464 -

Ford part number C9WY-10K843-D Finally! A made in the USA reproduction printed circuit board for your late built 1969 - 1970 Standard Cougar. This is a spot-on, class "A", no excuses reproduction that will give you decades of reliable service. This part exceeds the quality of the originals in that it is made from thicker materials, is bonded better, is more flexible and does not contain formaldehyde as did the originals. This is only for use on the late 1969 Standard white wiring harness...

MSRP:$109.99
$109.99 Price: $95.27

Buy Details

Availability: In-Stock Item
Item #: 14007 -

Ford part number C9WY-10K843-D Finally! A made in the USA reproduction printed circuit board for your late built 1969 XR7 or Eliminator (built after 2/17/69) and all 1970 XR7 and 1970 Eliminator. This is a spot-on, class "A", no excuses reproduction that will give you decades of reliable service. This part exceeds the quality of the originals in that it is made from thicker materials, is bonded better, is more flexible and does not contain formaldehyde as did the originals. This is only for...

$0 Price: $76.86

Buy Details

Availability: Rare / NOS Part
Item #: 20247 -

Very rare three part fold out printed on heavy stock promoting the Coca-Cola give away cars.

$0 Price: $32.85

Buy Details

Availability: In-Stock Item
Item #: 20353 -

Lots of great photos inside and out of the Cyclone, Montego and 1968 Cougar.

$0 Price: $42.89

Buy Details

Availability: Rare / NOS Part
Item #: 20442 -

This is the jumbo version, a much smaller version is what is commonly found. Mint condition.

$0 Price: $29.85

Buy Details

Availability: In-Stock Item
Item #: 26057 -

Nice reproduction of the prop rod used on the 1970 Eliminator. This will work on any 1967 - 1973 Cougar that has had a spoiler installed. The pictures of the installed original prop rod were taken at the 2008 PROWL Cougar show hosted by Cascade Cougar Club. The concours correct BOSS 302 Eliminator pictured is owned by John Benoit in Edgewood Washington. Click on images to enlarge. The above picture shows the approximate location of where to drill the hole in the passenger side rear quarter...

$65.00 Price: $83.62

Buy Details

Availability: In-Stock Item
Item #: 41805 -

This after market adjustable proportioning valve is far superior to the original equipment. Fully adjustable for tuning front to rear brake bias. Requires some routing modifications of brake lines for proper fit. Includes adapter fittings. Replaces Ford part # C5ZZ-2B091-A, or C7OZ-2B091-B.Fits: 1967 Mercury Cougar 1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar 1973 Mercury Cougar 1967 Ford Mustang 1968 Ford Mustang 1969 Ford Mustang 1970...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24592 -

C9OA-2B091-A Cylindrical shaped brass valve, some times called the pressure control valve, brake valve or 'cigar' valve. 1969 disc brake cars have it mounted almost directly on the Pressure Differential Valve on the driver side fender apron. The pressure differential valve is also commonly called the 'brake distribution block'. Please understand that most all of these valves will have some tool marks from pliers or vice grips. It is what we have left after previous owners have serviced them...

$69.99 Price: $88.18

Buy Details

Availability: In-Stock Item
Item #: 11953 -

Reproduction proportioning valve for the Mercury Cougar or Ford Mustang. This is a cylindrical shaped brass valve, some times called the pressure control valve, brake valve or 'cigar' valve. This valve is most often found at the junction of the high pressure hose back at the rear end, or later, found with the distribution block mounted on the driver side apron (inner fender). Replaces Ford part # C7OZ-2B091-B. Check out this video ...

$0 Price: $64.89

Buy Details

Availability: Out of Stock
Item #: 30371 -

This plastic protector sleeve is often missing or broken, but occasionally we come across a good used one. This part attaches just in front of / below the fuel tank on the passenger side, and serves two purposes: it routes the wiring closer to the fuel sending unit without it dangling down, and protects it from road debris This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0074 -

Used cable and knob assembly for opening the driver side fresh air vent on 1971-73 Mercury Cougar without air conditioning. Cable control mounts through the dash in a special dash bezel. About 13 inches in total length.Replaces Ford part number D1WY-6501891-A.*Note - Does not fit Mustang.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24568 -

Used cast dual sheave alternator pulley. Casting number C9AF-10A352-C, we believe that these originally had a zinc dichromate finish. Called out for use on various 1969-70 Mercury Cougar and Ford Mustang with a need for a dual sheave alternator pulley. Just a tiny bit smaller than 2-3/4 inches in diameter. *Note - this is a cast pulley instead of the common stamped steel single sheave version. Ford part # C9AF-10A352-C.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23853 -

C5AZ-6312-E Application 289 engines with power steering and the single belt alternator pulley. Without air conditioning, and without emissions.   6 5/16" wide 3" deep to mounts.  Ford casting number C7AE-6312-A. Double sheave 67 crank pulley.

$0 Price: $79.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25040 -

Has casting number D0OE-6312-B stamped on the inside. Application for 1970 all 351 engines, 1971 M code 351-4V, and 1971 and 1972 H code 351-2V engines with power steering or idler pulley. Dual sheave crankshaft pulley measurement of 8.00" and 6-11/16" diameters. No air conditioning. Ford Master Part number D0OZ-6A312-E. Four bolts hold it on too.

$0 Price: $98.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24369 -

Ford part number C8AZ-6A312-E. Application 1968 - 1969 - 1970 428 Cobra Jet without air conditioning and without power steering. Ford casting number C8AE-6312-E. Double sheave 68 69 70 428 CJ crank pulley.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23851 -

Ford part number C5AZ-6312-B. Application for 1967-68 289 and 302 engines without all of the following; air conditioning, power steering, California thermactor smog. The alternator would also have a single sheave pulley. Ford casting number C5AE-6312-A. Single sheave crank shaft pulley. About 6-5/16 inches in diameter.

$0 Price: $72.86

Buy Details

Availability: In-Stock Item
Item #: 31810 -

NOTE* After comparing to the original pulley, we've found that this reproduction is approximately 3/16" shorter in overall height. New crank shaft pulley, single sheave small block Ford 289 / 302 351W engines up to 1969. Single V-belt or fan belt pulley, means for use with only the alternator. Not for use with power steering, air conditioning, or smog pump. Measures just under 6-1/4 inches in diameter. Single sheave crank shaft pulley with 3 bolt holes, excludes engines after 1970....

$0 Price: $97.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25039 -

D0OE-6312-A For both Windsor and Cleveland 351 engines starting in 1970. This is a single sheave pulley, meaning without air conditioning and without power steering. One groove with a diameter of 6-11/16 inches in diameter. Ford Master Part number D0OZ-6A312-A. A four bolt hole crankshaft pulley for use with 1970 and upward crank dampeners.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12463 -

Used crank shaft pulley for any 1969 Mercury Cougar or Ford Mustang with 351w engine. This is a single groove pulley with a 6-1/8 inch diameter, and would have been used without power steering. One belt just for the water pump and alternator. Also fits other cars with 351 Windsor engines without P/S.Replaces Ford part number C9OE-6A312-D.

$0 Price: $68.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23852 -

C5AZ-6312-D Application for 1967-68 289 or 302 engines with air conditioning. Power steering and or California Thermactor emissions permissible. Ford casting number C5AE-B. Triple sheave 67 68 crank pulley. Inner diameters are about 6-1/2 inches, outer diameter is 7-5/16 inches.

$0 Price: $85.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24992 -

D0AE-6312-C For both the Cleveland and Windsor variety. Starting in 1970 Ford tried to standardize many of the engine parts. This is the "with air conditioning" pulley for all 1970 - 1971 351-2V & 351C-4V engines, and all 1972 -1973 351-2V engines. Triple sheave 6-23/32", 8.00", 8-13/32" inch diameters. A four bolt hole crank shaft pulley for use with 1970 and upward crank dampeners. Ford Master Part number D0AZ-6A312-C. *Excludes 1972 and 1973 Q code 351CJ engines. This means all 1972 and...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24010 -

Application 1967 - 1968 - 1969 Cougar with either 289 / 302 / 351w engines with air conditioning. After 9-11-66. Casting number 7AD. 5" diameter and a 3/8" sheave width.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18592 -

Applications, 1970 - 1971 - 1972 351c engines, All with or without air conditioning. Casting number D0OR-B. 6-1/4" diameter and 7/16" sheave width.

$0 Price: $78.25

Buy Details

Availability: In-Stock Item
Item #: 31811 -

Application could be for any 1967-69 Ford 289 / 302 /351W, but with only a single alternator belt. This is a copy of the Ford 7AA power steering pulley. This pulley mounted correctly on an OEM pump with factory brackets, will run on the second V-belt from the inside. The inner most fan belt runs the alternator. You would be using a single belt on the alternator. Correct application is for 1969 with 351W engines. 5-1/4" diameter and 3/8" sheave width.

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18589 -

Applications, 1970 351w engines, 1971 429CJ engines, and 1973 351c engines. All with or without air conditioning. Casting number D0AR-A. 5-3/4" diameter and 7/16" sheave width.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24013 -

Application, 1967 - 1968 - 1969 - 1970 390 / 428CJ engines with air conditioning. Casting number AF. 5-3/4" diameter and 5/16" sheave width.

$0 Price: $85.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21612 -

Applications various 302 / 351/ 429 engines. All with or without air conditioning. Casting number D0AR-B. 5-13/32" diameter and 7/16" sheave width.Ford part number C9TZ-3A733-D.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33045 -

Application 289-4V auto and 289-2V manual transmissions at the beginning of the 1967 model year. Pulley diameter 4 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C6OZ-9B447-A and engineering number is C6OE-9B447-A or B. *California DSO 52 and DSO 53 only.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24047 -

1967 289-2V after 11/14/1966 without air conditioning. Pulley diameter is 4.75 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C7AZ-9B447-E. *California DSO 52 and DSO 53 only.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24228 -

Application 289-2V (C code engines) prior to 11/14/1966, 289-4V (A code engines) all without air conditioning. Pulley diameter 3.97 inches, 1967 smog pulleys are unique in that they have 4 mounting holes. Ford part number C7AZ-9B447-A and engineering number is C7ZE-9B447-A. *California DSO 52 and DSO 53 only.

$0 Price: $49.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23856 -

C5AZ-8509-J For use originally on 1967 289 engines without power accessories. No air conditioning, no power steering, and standard 1 sheave alternators. Single belt pulley 6.10 inches in diameter. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2 inches.*This is one of the few water pump pulleys that did not have an imprinted casting number. Originally this pulley had an ink stamp. We will most likely be...

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21606 -

Water pump pulley 1 sheave, about 6.11 inches. When measured from the front of the water pump hub (or inside of the pulley) to the center line of the belt sheave the measurement is 2 inches. Application include 1967 Cougar with 289. 1969 Cougar and Mustang with 390-4V. Also various Mustangs 1965-67, all with 289.Replaces Ford casting number C5OE-8509-A.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23922 -

For use originally on 1967 289 engines with California emissions (All 1967 DSO 52 and 53 Mercury Cougars), and without factory air conditioning. With extra cooling (20 inch wide radiator). 3 sheave pulley (three fan belts), with pulleys having diameters of 4-7/16 inches and 5-7/8 inches. Ford casting number C6OE-8509-A, was probably an ink stamp. These pulleys were made using a double sheave C6AE-8509-A pulley with a second smaller pulley welded on.

$0 Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23923 -

C6AZ-8509-F With air conditioning. Power steering and or thermactor emissions possible. 2 sheaves or 2 fan belts with a diameter of about 5-5/16 inches. Ford casting number C6OE-8509-B.

$0 Price: $58.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24440 -

C8OZ-8509-B 1968 289 or 302 with automatic and 1969 351. All without air conditioning but with power steering. Power steering optional if with dual belt alternators. Two sheave pulley, diameter of 6-7/16 inches. Ford casting number C7OE-8509-D. Overall height or depth is 2-7/16 inches.

$0 Price: $84.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24439 -

C8OZ-8509-A Applications include 1968 289 / 302 with automatic transmissions and 1969 351, all-without power steering, air conditioning and with standard alternator with a single sheave pulley. This pulley is 6-1/2 inches in diameter and is a single sheave pulley. Ford casting number C8AE-8A528-F.