Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.
International Customers Click Here [Updated 6/2024]
 
'https://cdn.cougparts.com/dc/14007/1429547274_s.jpg','https://cdn.cougparts.com/dc/14007/1429547251_l.jpg'
  • Printed Circuit Board - LATE - XR7 / Eliminator - Replaces RED PCB - Repro ~ Late 1969 - 1970 Mercury Cougar - 14007
  • Printed Circuit Board - LATE - XR7 / Eliminator - Replaces RED PCB - Repro ~ Late 1969 - 1970 Mercury Cougar - 14007

Item #: 14007

Login to add this item
to a saved wishlist
MSRP:$109.99
Price: $95.27
You Save: $14.72 (13.4%)
    Cost: 7622
    Earns: 382
    Bonus: 0

    Availability

    In-Stock Item - Ships: Next Business Day

    Applications

    Description

    Ford part number C9WY-10K843-D Finally! A made in the USA reproduction printed circuit board for your late built 1969 XR7 or Eliminator (built after 2/17/69) and all 1970 XR7 and 1970 Eliminator. This is a spot-on, class "A", no excuses reproduction that will give you decades of reliable service. This part exceeds the quality of the originals in that it is made from thicker materials, is bonded better, is more flexible and does not contain formaldehyde as did the originals. This is only for use on the late 1969 XR7 or Eliminator with white wiring harness plugs. Harnesses with the black connector plugs only match up to the blue printed circuit boards.

    Check out the video below on our new gauge tester:

    Specifications:
    Shipping Weight: 0.20 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    4.94 out of 5 stars
    Based upon 4 Review(s).
    5 Stars
    75%
    4 Stars
    25%
    3 Stars
    0%
    2 Stars
    0%
    1 Stars
    0%
    Austin, TX
    2013

    4.75 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    My original printed circuit was delaminating. This is not the correct original color, but seems to be a good quality product. I had to trim a small amount of the outer insulating layer to expose more of the contact around one of the socket holes, because when that light socket was turned to its lock position one of the terminals was on the insulation not the contact so the light didn't work. This slight modification was easily done with a razor blade and now all lights are working.

    Turlock, Ca.

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Bright
    • %20correct%20fit
    Cons:
    Fit my XR7 perfectly, works great, like new brightness.

    Works well

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • good%20quality
    • %20works%20well
    Cons:
    performs just like original

    2014

    The Lights, The lights !!!

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Very nice part. Fit, finish and function are spot on. Everything is functioning in the pod.

    Number of questions: 1
    Please login to ask a question.
    Question
    Asked:
    Is this the PCB for the 1970 Cougar Eliminator with a tachometer??,
    August 12, 2020 9:53 AM
    Answer
    WCCC Admin Answered:
    Good question. yes, that is the correct pcb.
    August 12, 2020 6:18 PM

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    <p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...
    - Dean
    I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...
    - MartinD
    My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...
    - Frank
    Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...
    - Mike Dunlap
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    D3D14