Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 817-864 of 4620
$0 Price: $35.85

Buy Details

Availability: In-Stock Item
Item #: 15523 -

Fits C4 transmissions. Chrome finish. O-ring included Replaces Ford part # C6OZ-7A228-B. Application 1967 - 1968 Mercury Cougars with 289/302 engines and automatic (C4) transmissions, code "W" on your door data plate. 1966 - 1968 Ford Mustangs with 28/302 engines and automatic transmissions, code "W" on your door data plate.

$0 Price: $42.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0002 -

Original dipstick tube, approximately 19-1/4 inches long. Application: 1967-68 Mercury Cougar or 1966-68 with any 289/302 engine and C4 automatic transmission, code "W" on your door data plate. Ford part # C6OZ-7A228-B.

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 16-0005 -

Original dipstick tube originally painted blue and approximately 19-29/32" inches long. Application 1973 Mercury Cougar or Ford Mustang with FMX automatic transmissions, code "X" on your door data plate. Ford master part number D3ZZ-7A228-B.

$0 Price: $74.55

Buy Details

Availability: In-Stock Item
Item #: 13887 -

This kit is a must when redoing the disc brakes on a 1968-73 Cougar. Includes new brakets (caliper stabilizers), bolts, pins, and clips and rubber dust seals. Kit includes the pair.Check out our caliper tips and tricks video below: ...

$0 Price: $65.05

Buy Details

Availability: In-Stock Item
Item #: 26171 -

This reproduction OE steel front to rear axles disc brake line is for Mercury Cougars produced before Feb. 1967. Early production brake lines were routed 'over' the steering column. This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for 1967 Mercury Cougars with rear mounted proportioning valves. Application does not change if the front is drum or...

$0 Price: $25.85

Buy Details

Availability: In-Stock Item
Item #: 14253 -

Reproduction disc brake master cylinder cap for the Mercury Cougar or Ford Mustang. This unit has the correct stampings, rubber inner gasket, and is considered show quality. This cap will only fit master cylinder part # 15298.Replaces Ford part # C7AZ-2162.Fits: 1967 Mercury Cougar1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar 1973 Mercury Cougar 1967 Ford Mustang / Torino1968 Ford Mustang / Torino 1969 Ford Mustang / Torino 1970 Ford...

$0 Price: $63.15

Buy Details

Availability: In-Stock Item
Item #: 14311 -

Reproduction adjustable disc brake push rod set for the Mercury Cougar or Ford Mustang. When you convert to manual disc brakes, this kit eliminates excess pedal travel and insures quicker braking response. NOT for power disc brakes. For Manual disc brake cars ONLY.

$0 Price: $61.85

Buy Details

Availability: In-Stock Item
Item #: 41922 -

This is a much needed part for your disc brake car. It is the correct Proportioning Valve Distribution Block for a 1970-71 Torino, Cyclone, Ranchero, 1970-73 Mustang and Cougar, but can be used on any year with minor brake line changes. Unlike the earlier units the proportioning valve is located internally. Keep in mind we do have a rebuild kit for your original unit so if you have an original FoMoCo block it is a better idea to rebuild it. NOTE! The feedback on this item is that one of the O...

$0 Price: $58.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24051 -

Used Distributor / 289-2V / Automatic Transmission for the 1967 Mercury Cougar / 1967 Ford MustangFord part number C7OF-12127-B  

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24410 -

Used Distributor / 289-2V / 302-2V / Automatic Transmission for the 1968 Mercury Cougar / 1968 Ford MustangFord part number C8OF-12127-C  

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24348 -

Used Distributor / 302-2V / Manual Transmission for the 1968 Mercury Cougar / 1968 Ford MustangFord part number C8AF-12127-E  

$0 Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24606 -

Used core distributor for 1969 Mercury Cougar and Ford Mustang with H code 351-2V and aNY transmission. Core distributors will have correct stamping of C9OF-M. Original Ford part number C9OF-12127-M.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25597 -

Used core distributor for 1973 Mercury Cougar and Ford Mustang with H code 351C-2V and automatic transmission. Core distributors will have correct stamping of D3ZF-CA. Original Ford part number D3ZF-12127-CA. 351 Windsor engines use a smaller distributor gear (about 1-1/4"), Cleveland.distributor gear is about 1-7/16" in diameter.

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25002 -

Used core distributor for 1969 Mercury Cougar and Ford Mustang with H code 351W-2V and automatic transmission. Core distributors will have correct stamping of D0AF-AC. Original Ford part number D0AF-12127-AC. 351 Windsor engines use a smaller distributor gear (about 1-1/4"), Cleveland.distributor gear is about 1-7/16" in diameter.

$0 Price: $95.00

Buy Details

Availability: Out of Stock
Item #: 33266 -

New Old Stock vacuum advance. This style used 1965-67 on Autolite V-8 distributors. Designed for use with a threaded nipple. DD-190 and code 303 numbers associated with this unit. This is an MOTORCRAFT marked vacuum advance, there are other service replacement units marked Autolite. Threaded nipple available separately. Ford Part Number C5AZ-12370-A

$0 Price: $58.91

Buy Details

Availability: In-Stock Item
Item #: 41939 -

Reproduction single port vacuum advance for most all 1967-71 Ford V-8 engines. Fits Ford's brand of Autolite and Motorcraft distributors found on all 1967-71 Mercury Cougar and V-8 Ford Mustangs.

$0 Price: $30.00

Buy Details

Availability: Rare / NOS Part
Item #: 33327 -

New Old Stock upper distributor bushing for many V-8 engines 1958 through 1973. All 289 distributors 1965-67 should have one installed, 302's up until 1973 or possibly later. All FE distributors, including 352, 390, 410, 427, 428.  * Note - 351W and 351C engines and 429/460 engines used a different upper bushing. See related items for that listing. Ford part number B8QH-12120-A. We measure 0.687" O.D., 0.468" I.D., and 1.750 long. ...

$0 Price: $27.27

Buy Details

Availability: In-Stock Item
Item #: 33586 -

Reproduction upper distributor bushing for many V-8 engines 1958 through 1973. All 289 distributors 1965-67 should have one installed, 302's up until 1973 or possibly later. All FE distributors, including 352, 390, 410, 427, 428.  * Note - 351W and 351C engines and 429/460 engines used a different upper bushing. See related items for that listing. Replaces Ford part number B8QH-12120-A. We measure 0.687" O.D., 0.468" I.D., and 1.750 long. ...

$0 Price: $27.27

Buy Details

Availability: In-Stock Item
Item #: 33587 -

Reproduction upper distributor bushing for 1969-73 351W, 351C, 429, and 460 Ford V-8 engines. * Note - 260/ 289 / 302 / 352 / 390 / 410 / 427 / 428 engines, all used a different upper bushing. See related items for that listing. Replaces Ford part number  C5AZ-12120-A. We measure 0. O.D., 0." I.D., and 1.750 long.

$0 Price: $75.00

Buy Details

Availability: Out of Stock
Item #: 33247 -

New Old Stock distributor cam and weight assembly for many Autolite and Motorcraft distributors. This is cam #107 or DF-342, single points cam with weights marked 13L and 18L from the top. Factory used on small block and FE distributors.  Ford part number C5AZ-12210-A.

$0 Price: $75.00

Buy Details

Availability: Out of Stock
Item #: 33248 -

New Old Stock distributor cam and weight assembly for many Autolite and Motorcraft distributors. This is cam #108 or DF-343, single points cam with weights marked 10L and 15L from the top. Factory used on small block and FE distributors.   Ford part number C5AZ-12210-B.

$0 Price: $65.00

Buy Details

Availability: Rare / NOS Part
Item #: 33228 -

New Old Stock Autolite distributor cap for the 1964, 1965 1966 Ford and Mustang. Technically a service replacement cap, this cap has aluminum contacts, not brass. Fits all Ford V8 engines 1957-73. Before and beyond. Does not have "AUTOLITE" on the cap, just a "1", typical cap used 1957-1966 of Ford V-8's. Ford part number B7A-12106-A. 

$0 Price: $65.00

Buy Details

Availability: Out of Stock
Item #: 33225 -

New Old Stock MOTORCRAFT distributor cap for the 1967 - 1973 Mercury Cougar or Ford Mustang. Technically a service replacement cap, this cap has an embossed "MOTORCRAFT" on top. Fits all Ford V8 engines 1967-73. Before and beyond.Ford part number B7A-12106-A. 

$0 Price: $26.85

Buy Details

Availability: Rare / NOS Part
Item #: 32880 -

NOS distributor lead wire without the boot for the coil. There were at least two different lengths of wire leads found on 1967 Mercury Cougar and most all other Ford and Mercury distributors. This is the longer wiring harness, about 20 inches outside of the distributor. Direct replacement for 1961-67 Ford distributors.Ford part number C1VF-12216-A.

$0 Price: $35.85

Buy Details

Availability: Rare / NOS Part
Item #: 32881 -

NOS distributor lead wire with green boot for the coil. Direct replacement for 1968-73 Ford distributors. There were several colors of boots that go to the coil, this is a green one as shown. Ford part number C7VY-12216-A.

$0 Price: $25.45

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41402 -

Reproduction distributor lead wire without the boot for the coil. There were at least two different lengths of wire leads found on 1967 Mercury Cougar and most all other Ford and Mercury distributors. This is the longer wiring harness, about 20 inches outside of the distributor. Direct replacement for 1961-67 Ford distributors.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31599 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-70 Mercury Cougar or Ford Mustang with 289, 302, and 351W engines. This kit is for the distributor vacuum advance units with dual nipple connections. 

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31600 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-70 Mercury Cougar or Ford Mustang with 289, 302, and 351W engines. This kit is for the distributor vacuum advance units with single nipple connections. 

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31602 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1970-73 Mercury Cougar or Ford Mustang with 351C or cleveland engines. Distributor vacuum advance units with dual nipple connections. Often times it is the ones with automatic transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31601 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1970-73 Mercury Cougar or Ford Mustang with 351C or cleveland engines. Distributor vacuum advance units with single nipple connections. Often times it is the ones with manual transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31598 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-69 Mercury Cougar or Ford Mustang with S or X code engines. Additionally fits 1968-70 428 Cobra Jet engines. This kit is for the distributor vacuum advance units with dual nipple connections. Often times it is the ones with automatic transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31597 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-69 Mercury Cougar or Ford Mustang with S or X code engines. Additionally fits 1968-70 428 Cobra Jet engines. This kit is for the distributor vacuum advance units with single nipple connections. Often times it is the ones with manual transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31603 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1971 Mercury Cougar or Ford Mustang with 429CJ engines. Distributor vacuum advance units with dual nipple connections. Often times it is the ones with automatic transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31604 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1971 Mercury Cougar or Ford Mustang with 429CJ engines. Distributor vacuum advance units with single nipple connections. Often times it is the ones with manual transmissions, but not always.

$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 31596 -

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. 1969-70 Mercury Cougar Eliminator with Boss 302 and 1969-70 Ford Mustang with Boss 302 engines.

MSRP:$64.99
$64.99 Price: $55.69

Buy Details

Availability: In-Stock Item
Item #: 14-0005 -

New rear seat to trunk steel divider for your Mercury Cougar. We had this one made specifically for the Mercury Cougar and it is designed to replace the flimsy tar based cardboard factory divider.We have noticed that after 40 plus years of chassis flex, the welds on the cross braces behind the rear seat tend to be broken. When installed properly behind the rear seat, this 18 gauge steel divider will provide stiffness to the chassis. This divider can be bonded, screwed or welded into your car...

MSRP:$64.99
$64.99 Price: $55.67

Buy Details

Availability: In-Stock Item
Item #: 14-0004 -

NOTE: You  can save on shipping costs by ordering our template (traced out on butcher paper) and cut your own. New rear seat to trunk steel divider for your Mercury Cougar. We had this one made specifically for the Mercury Cougar and it is designed to replace the flimsy tar based cardboard factory divider.We have noticed that after 40 plus years of chassis flex, the welds on the cross braces behind the rear seat tend to be broken at the top or bottom. When installed properly...

$0 Price: $45.86

Buy Details

Availability: In-Stock Item
Item #: 12134 -

This restored trim piece mounts to the back of the vent frame of any 1967-68 Mercury Cougar or Ford Mustang. Passenger side only, made of galvanized steel. Full part name by Ford is: Retainer, vent window division bar glass run. The felt inserts will generally not be serviceable. See also C7ZZ-21546-A. Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration ...

$26.00 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 14341 -

Nice chrome finish with Bulb. This was used on many Ford products but this bezel is 100% correct for the 1971-73 Standard Hardtop Cougar manufactured after 6/71, but will also work for all 1971-73 Cougars or Mustangs if you purchase the matching dome lens. No Cougar had a dome light in 1967-70. Ford Part # D6UZ-13788-A.

$0 Price: $46.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 54545 -

Used door / lid for the glove box in the Mercury Cougar, grade "B". This is just the bare inner and outer door / lid and does not come with the hinge, liner, lock or lock bezel. To prevent damage to the plastic glove box door, the inner steel backer should be removed and file 1/16" off of one or both sides. Cracking is due to shrinkage of the plastic glove box door over time.Plan on painting to match your interior. Ford part # D1WY-6506024-A for the inner, D1WY-6506024-B for the outer. ...

$0 Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12110 -

Used door / lid for the glove box in the 1967 Mercury Cougar or Ford Mustang. This unit is just the bare door / lid and does not come with the hinge, liner, lock or lock bezel. We have found this door on 1967 and into 1968 Cougars. Sometime in early 1968 this glove box door came with three holes on the back. Both glove box doors fully interchange. Bead blasted for the photo, door ships without rust, in most cases you will want to paint prior to installation.Ford part # C7ZZ-6506024-A.*NOTE*...

$0 Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16183 -

Used door / lid for the glove box on any 1968 Mercury Cougar or Ford Mustang. This unit is just the bare door / lid and does not come with the hinge, liner, lock or lock bezel. We have found this design of door with the 3 holes, well into the 1968 production run. 1967 and early 1968 doors are typically without the three holes on the back. Both glove box doors fully interchange. Bead blasted for the photo, door ships without rust, in most cases you will want to paint prior to installation.Ford...

$0 Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12111 -

Used door / lid for the glove box in the Mercury Cougar or Ford Mustang. This unit is just the bare door / lid and does not come with the hinge, liner, lock or lock bezel. Dent free, may have minor surface rust. Ford part # C9ZZ-6506024-A.

$0 Price: $48.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16798 -

Used door / lid for the glove box in the Mercury Cougar, grade "B", with at least one crack, or an extra chip or scrape. This is just the bare inner and outer door / lid and does not come with the hinge, liner, lock or lock bezel. To prevent damage to the plastic glove box door, the inner steel backer should be removed and file 1/16" off of one or both sides. Cracking is due to shrinkage of the plastic glove box door over time.Plan on painting to match your interior. Ford part # D1WY-6506024-A...

$0 Price: $50.54

Buy Details

Availability: In-Stock Item
Item #: 32946 -

This listing is for the outer doors pieces only, Cougar and Mustang are identical. Sold only as a pair.Replaces Ford part numbers C7ZZ-6521453-A  and  C7ZZ-6521452-A

$0 Price: $55.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24201 -

Used driver side (left hand) factory stainless steel door guard for the Mercury Cougar.NOTE: This item will not ship until a useable core is received.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24204 -

Used passenger side (right hand) factory stainless steel door guard for the Mercury Cougar.NOTE: This item will not ship until a useable core is received.