CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.

International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Distributor Vacuum Hose - 289 / 302 / 351W - Single Advance - CONCOURS - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang

1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

1 Review(s) 0

Item #: 31600

Price: $34.55

Cost: 2764

Earns: 139

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

Description

Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-70 Mercury Cougar or Ford Mustang with 289, 302, and 351W engines. This kit is for the distributor vacuum advance units with single nipple connections.

Specifications:

Shipping Weight: 0.50 LBS

(weight shown may be the dimensional weight)

1 Reviews (4.50 of 5 Rating)

4.50 out of 5 stars
Based upon 1 Review(s).

5 Stars

4 Stars

100%

3 Stars

2 Stars

1 Stars

Write a review!

Kellen

2017

1969 351W 2V, FMX, NO AC

6/22/2022

4.50 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Looks like this kit is correct for the AC cars. Per the factory shop manual and the setup on my car, only a single hose (non striped?) is used from the port under the thermal choke spring to the advance unit.
I used the red striped hose as it was long enough, a few inches too long even.

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 31985 [More info]
[More info] Freeze / Expansion Plug - 15 Piece Set - Brass - 289 / 302 / 351W - Repro - 1967 - 1970 Cougar / 1967 - 1973 Ford Mustang
Brass and steel freeze plug or expansion plug set for any Ford 289 / 302 / 351W engine. 1967-70 Mercury Cougar and 1967-73 Ford Mustang. 15 piece set with threaded screw in plugs as shown.

Buy

$31.45
Frequently
Purchased With

Item #: 41953 [More info]
[More info] Courtesy Light - Interior Quarter / C Pillar Panel - Repro ~ 1969 - 1973 Mercury Cougar / 1969 - 1970 Ford Mustang
This is the chromed correct die cast construction for your 1969 Cougar, 1970-73 used plastic but these will fit fine and look better than the plastic units. Great Quality. Sold individually, two required per...

Buy

$55.65
Frequently
Purchased With

Item #: 30129 [More info]
[More info] Bolt - Distributor Hold Down Clamp - All V-8 Engines - Repro ~ 1967 - 1973 Mercury Cougar / 1965 - 1973 Ford Mustang
Distributor hold down bolt. All V-8 engines.1967-73 Mercury Cougar and Ford Mustang. 5/16 x 7/8" bolt, 1/2' hex head.

Buy

$1.95
Frequently
Purchased With

Item #: 11-0363 [More info]
[More info] Door Lock Rods - Driver Side - Set of 3 - Used ~ 1969 - 1970 Mercury Cougar
Good original driver side door latch rod set. Includes rod for inside lock, outside key lock, and outside door release actuating rod. These are good used parts and are a better quality and value compared to the...

Buy

$27.86
Frequently
Purchased With

Item #: 15037 [More info]
[More info] Starter Cable Grommets- Repro ~ 1967 - 1973 Mercury Cougar - 1967 - 1973 Ford Mustang
Kit includes two brackets and grommets for routing battery cable between starter and solenoid on inner fender. Replaces Ford Part # : C5ZZ-14302-K

Buy

$12.75
Frequently
Purchased With

Item #: 31566 [More info]
[More info] Bolt Kit - Water Pump - 302 / Boss 302 / 351W - Repro ~ 1970 Mercury Cougar / 1970 - 1973 Ford Mustang
New Bolt kit, for the installation of a water pump on 1970-73 Ford 302, Boss 302, or 351W engine. Fits all 1970 Mercury Cougar and 1970-73 Ford Mustangs. 9 total pieces in the kit as shown.

Buy

$33.25
Frequently
Purchased With

Item #: 26499 [More info]
[More info] Handle - Battery Hold Down - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Reproduction plastic battery hold down for the Mercury Cougar or Ford Mustang. According to the Master Parts Catalog, late 1969 through mid 1970, Cougars and Mustangs used these black plastic units. Late 1970 used...

Buy

$12.75
Frequently
Purchased With

Item #: 41080 [More info]
[More info] Fastener Kit - Hood Latch Vertical Support - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
This reproduction hood latch vertical support screw and U nut kit fits both the Standard and XR7 and is s sold as a kit as pictured.

Buy

$9.32
Frequently
Purchased With

Item #: 41705 [More info]
[More info] Elbow - Heater Hose - 351 2V - Concours Correct - Repro ~ 1970 - 1971 Mercury Cougar - 1970 - 1971 Ford Mustang
Concourse correct 351 2bbl engine heater hose connector with a 90?� degree elbow that attaches to the intake manifold. Product discontinued by manufacturer. Know anyone else reproducing these? Let us know!...

Buy

$48.35
Frequently
Purchased With

Item #: 41093 [More info]
[More info] Fastener Kit - Cowl Brace to Cowl - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Sold as a Kit as Pictured.

Buy

$21.69
Frequently
Purchased With

Item #: 41099 [More info]
[More info] Bolts and U Nuts - Front Valance - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Reproduction bolts and U nuts for mounting the front valances on either a Mercury Cougar or Ford Mustang.

Buy

$11.34
Frequently
Purchased With

Item #: 14-0005 [More info]
[More info] Divider - Rear Seat to Trunk - Coupe - METAL - New ~ 1969 - 1970 Mercury Cougar
New rear seat to trunk steel divider for your Mercury Cougar. We had this one made specifically for the Mercury Cougar and it is designed to replace the flimsy tar based cardboard factory divider.We have noticed...

Buy

$55.69

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E2C29