Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-125 of 125
$0 Price: $4.75

Buy Details

Availability: In-Stock Item
Item #: 53238 -

Short steel chromed valve stem for Ford wheels or any steel wheel with a 0.453" hole. Clamp in or bolt in style, sticks up 3/4 from wheel surface, 200psi maximum pressure. These will work with our aftermarket Ford wheels without trim rings. These are not compatible with our aluminum wheels.Premium grade, marked for "High Temperature".

$0 Price: $67.76

Buy Details

Availability: In-Stock Item
Item #: 20685 -

5-Lug Kit includes 20 chrome tapered 13/16" lug nuts and 4 chrome valve stems for installation of the new Legendary aluminum wheels. These really only fit the Magstar style wheels; we recommend the 3/4" lug nuts for all the other Legendary wheels for clearance reasons. Conical Head: 13/16" Hex Thread Size: 1/2" Bolt Pattern Also available individually.Check out our video on Legendary Wheels below: ...

$0 Price: $163.80

Buy Details

Availability: In-Stock Item
Item #: 30726 -

5-Lug Kit includes 20 chrome tapered 13/16" lug nuts and 4 chrome valve stems. Specifically for installation of the new Legendary GT7 and 1966 Shelby wheels. Thread Size: 1/2" Bolt Pattern Check out our video on Legendary Wheels below: ...

$0 Price: $67.76

Buy Details

Availability: In-Stock Item
Item #: 12311 -

5-Lug Kit includes 20 chrome lug nuts and 4 chrome valve stems for installation of the new aluminum Legendary Series wheels. Tapered for correct fit. This 3/4" size is what we recommend you use with the Legendary wheels, since the clearances are too tight for 13/16" nuts. Conical Head: 3/4" Hex Thread Size: 1/2" Bolt Pattern Also available individually.Check out our video on Legendary Wheels below: ...

$0 Price: $9.35

Buy Details

Availability: In-Stock Item
Item #: 32127 -

This hard to find cast aluminum spacer may be all you need to provide that little bit of extra clearance for calipers, control arms, frame rails, etc. At only 1/8" thick, it does not require longer wheel studs like many thicker spacers you find on the market.

$0 Price: $2.60

Buy Details

Availability: In-Stock Item
Item #: 15590 -

New wheel stud replacement for all Mercury Cougars equipped with front drum brakes. Pretty much fits most other front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only, serrated 2" stud with correct 1/2 x 20 threads. These are slightly longer in length than the stock ones, this will allow the alloy wheels to fit the Classic Cougars.Replaces Ford part # C30Z-1107-A.*NOTE* You should use a press to remove and/or install the new studs.

$0 Price: $3.96

Buy Details

Availability: In-Stock Item
Item #: 33732 -

New extra long wheel stud replacement for all Mercury Cougars equipped with front drum brakes. Pretty much fits most other front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only, serrated 2-1/4" stud with correct 1/2 x 20 threads.  These are 1/4" longer in length than the stock studs, this will allow the alloy wheels, wheel spacers and aftermarket disc brakes.Replaces Ford part # C30Z-1107-A.*NOTE* You should use a press to remove and/or install the new...

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25204 -

Used on the 1970 Ford Mustang, 1970 - 1971 Cyclone and Torino and 1971 Cougar style steel wheel 14 x 7". Master Parts Catalog description: 15-1/4" O.D., 11" I.D., 2-3/4" wide. This ring will have one or two very small scratches or dings that will not be easily fixed, driver quality.Ford part number D0ZZ-1210-BFord superseded this part with part number D4WY-1210-A

$0 Price: $290.00

Buy Details

Availability: Rare / NOS Part
Item #: 25157 -

Very rare trim ring used in conjunction with a 15x7" steel wheel and small hub cap on the 1971 Cougar 429 CJ. Only a hand full of Cougars ever got this trim ring. This would also have been used on a few applications like a 1970-71 BOSS Mustang or 1971 429 Cobra Jet Mustang, Torino or Cyclone or other Ford with 15x7 wheels and small center cap. We have various condition used rings at a reduced price as well, call for availability, sold individually.Ford part number D0ZA-1210-G. ...

$0 Price: $1,125.00

Buy Details

Availability: Rare / NOS Part
Item #: 33832 -

Set of 4 NOS very rare trim rings used in conjunction with a 15x7" steel wheel and small hub cap on the 1971 Cougar 429 CJ. Only a hand full of Cougars ever got this trim ring. This would also have been used on a few applications like a 1970-71 BOSS Mustang or 1971 429 Cobra Jet Mustang, Torino or Cyclone or other Ford with 15x7 wheels and small center cap. We have various condition used rings at a reduced price as well, call for availability, sold individually. Ford part number D0ZA-1210-...

$0 Price: $165.85

Buy Details

Availability: Out of Stock
Item #: 42156 -

Set of 4 Chrome center caps with Blue background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. The Magnum 500 wheel was not available on the Mercury line-up until 1974 and it came with a red center cap, star-burst pattern, made from plastic. This brand new to the market cap is a great alternative for the many folks wanting to run an attractive, era correct looking...

$0 Price: $141.05

Buy Details

Availability: Out of Stock
Item #: 42160 -

Set of 4 Chrome center caps with red background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...

$0 Price: $7.38

Buy Details

Availability: Out of Stock
Item #: 26473 -

This ultra rare NOS center cap decal features a black background and a chrome walking cat and was used when the 10 spoke 15" aluminum Shelby wheels were ordered for your Mercury Cougar. The wheels were marketed through Shelby American in the Cougar catalog titled, "How To Sharpen Your Cats Claws". I was able to obtain the last of their inventory through a previous employee when they closed the doors in the mid 70's. They measure 1-13/16" in diameter and fit well into the 3 bar spinners used on...

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 24423 -

Used grade A near perfect dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one pictured is brushed, but we often have both in...

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 31045 -

Used grade B less than perfect with a couple dings / scratches / blems dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one...

$0 Price: $74.88

Buy Details

Availability: Out of Stock
Item #: 31080 -

Used A grade dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. Used item as would have been found on 1969 Eliminators as well as other models with the plain poverty or dog dish center cap, about 7-1/2 inches in diameter. Replaces Ford part # C8OZ-1130-G, or C8MY-1130-A. Fits: 1969 Mercury Cougar Eliminator / Cyclone1970 Mercury Cougar Eliminator / Cyclone1971 Mercury Cougar / Cyclone1972 Mercury Cougar 1973 Mercury Cougar 1969 Ford Mustang...

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 20447 -

Used grade A near perfect dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one pictured is brushed, but we often have both in...

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 31046 -

Used grade B less than perfect with a couple dings / scratches / blems dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one...

$0 Price: $199.80

Buy Details

Availability: Out of Stock
Item #: 32187 -

Original space saver tire marked F78-15 from a 1970's Mercury or Ford. GoodYear brand it has the larger hub size, bolt pattern is 5 on 4-1/2. Not sure if it has ever been inflated, it is collapsed as shown.  Just looking for a space saver spare? This is it, it looks the part to those that casually look in the trunk of the car at a car show. Tread is period correct for a Goodyear tire, but typically B.F. Goodrich was optional on 1968-69 Cougar or Mustang. *NOTE* Does not include...

$0 Price: $129.87

Buy Details

Availability: In-Stock Item
Item #: 31920 -

NOS spare tire lock for the 68 - 73 Cougar Mustang and Torino. Spare tire locks were first offered as an option in 1973, but will fit on any year from 1968 to 1973. The ford master catalog shows that all years from 68 - 73 whether it be Cougar, Mustang or Torino all had the correct size stud for this lock to fit. Fits spare tire hold down J bolts with 1/2-13 course threads, common on Fords 1968-73.  Ford part number D3FZ-1386-A. J bolt not included. ...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 31635 -

Used spare tire lock for the 68 - 73 Cougar Mustang and Torino. Spare tire locks were first offered as an option in 1973, but will fit on any year from 1968 to 1973. The ford master catalog shows that all years from 68 - 73 whether it be Cougar, Mustang or Torino all had the correct size stud for this lock to fit. Fits spare tire hold down J bolts with 1/2-13 course threads, common on Fords 1968-73. Ford part number D3FZ-1386-A. J bolt not included. This icon means that we're looking...

$0 Price: $62.87

Buy Details

Availability: Out of Stock
Item #: 25020 -

Used 14x6" stamped steel wheel for the Mercury Cougar or Ford Mustang. We save some of the better stock wheels you will find out there and some have probably ridden in trunks most of their lives. Have a bent or damaged wheel? Don't have a spare? These have the larger center hub, and will fit the "Granada" disc brake rotors. Shipped bare. Various conditions, subject to availability. Used 'as is', wheel as found in the wilds of our wrecking yard.Ford part # D0DZ-1007-B. ...

$0 Price: $129.87

Buy Details

Availability: Out of Stock
Item #: 25069 -

Used 14x7" stock stamped steel wheel for the Mercury Cougar and Ford Mustang / Torino. Rare seldom seen size most commonly found on a Ford Torino. These were offered from 1971 through 1973 on the Cougar and 1970 - 1973 on the Mustang and Torino. Have a bent or damaged wheel? Don't have a spare? Total width is 8" with a 4" backspacing. Various conditions and subject to availability. Used 'as is', wheel as found in the wild.Ford part # D0OZ-1007-B.

$285.00 Price: $297.86

Buy Details

Availability: Out of Stock
Item #: 18942 -

Used 15x7" stock stamped steel wheel for your Mercury Cougar or Ford Mustang. Originally, this unit was a black painted steel wheel that came with a small cap and deep trim ring. Ford part # D0OZ-1007-A.

$0 Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 19707 -

Used 'Kelsey Hayes' 15x7" styled steel wheel with a new chrome 15" rim for your Mercury Cougar. These originally came 14x7" on the Cougar with a beauty ring. We take your original wheels and have a new 15x7" outer chrome rim installed. This purchase requires a core wheel be sent to us. The good news is that you can find these in 14x6" or 14x7" inexpensively when they have been damaged and rusted on the outer lip. As long as the centers are untouched they are good cores. We sell these...

$0 Price: $139.86

Buy Details

Availability: Out of Stock
Item #: 28587 -

Used on the 1970 Mustang, 1970 - 1971 Cyclone and Torino and 1971 1972 1973 Cougar style steel wheel 14 x 7". Master Parts Catalog description: 15-1/4" O.D., 11" I.D., 2-3/4" wide. This grade A brushed beauty ring will look right at home on a low mile car, no curb rash!!! Ford part number D0ZZ-1210-B Ford superseded this part with part number in 1974 with D4WY-1210-A which looks the same just a little bit deeper at 2 7/8" deep ...

$0 Price: $139.86

Buy Details

Availability: Out of Stock
Item #: 30544 -

Very rare trim ring used in conjunction with a 15x7" steel wheel and small hub cap on the 1971 Cougar 429 CJ. Only a hand full of Cougars ever got this trim ring. This would also have been used on a few applications like a 1970 BOSS Mustang or 1971 429 Cobra Jet Mustang, Torino or Cyclone. Grade B will show minor scratches and wear.

  • Next >