Used Air Cleaner Bases & Lids

Good used rubber ram air seal for any 1968-70 Mercury Cougar or 1968 Ford Mustang. May have some warpage issues. 

Nice used air cleaner assembly, includes base, snorkel, heat riser and air cleaner lid. Application is any 1967 Mercury Cougar or Ford Mustang with C code 289-2V or A code 289-4V engines without emissions. All good parts as shown, thermal switch in air cleaner snorkel may not work, and no we cannot test them.Even if you are not currently running all original parts under the hood this is a great set to stow away as these items are going up in price and add value to your car when the time comes...

Nice used 1968 air cleaner assembly, includes base with elbow, snorkel with vacuum operated flapper, heat riser and air cleaner lid. Application is any 1968 Mercury Cougar or Ford Mustang with C code 289-2V or F code 302-2V, or J code 302-4V engines with closed emissions. All good parts as shown, vacuum controlled flapper in air cleaner snorkel may not work, and no we cannot test them. This style of vacuum operated flapper was used at the beginning of the 1968 model year. There was a change to...

Used air cleaner lid for all 1972 H code 351-2V engines. About 14.75 inches in diameter. Ford part number for the air cleaner assembly is D2ZZ-9600-A. The air cleaner lid by itself doesn't have a number. 

C8AF-9600-C Standard air cleaner base for all 1968 289-2V (C code), 302-2V (F code), 302-4V (J code), and 390-2V (X code). This is for a closed emissions system (IMCO), that included an oil cap with a fitting going to the air cleaner base and a PCV valve in the passenger side valve cover. About 17.84" inches in diameter. Identified with round nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-G. Ford part number C8AZ-9600-D.*Note - Canada did not...

C7ZF-9600-C Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. 49 state open PCV system. No dents, dings, rust or other damage. *Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.*Excludes California. Ford part number C5ZZ-9600-D. Notice the lack of metal elbow for venting back to the oil filler cap. Click on images to...

Good used air cleaner base with none of the attaching parts. Will have a dent, rust inside or other repairable flaw. Correct for 289 2V or 4V non California Emissions equipped Cougar.*Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.

D1AF-9600-FA Air cleaner base for all 1971 Cougars with the H code 351-2V engine. About 17.84" inches in diameter. Could also be found with casting number D1AF-9600-FB or D1AF-9600-FC. IMAGES BELOW ARE FOR REFERENCE ONLY, EXTRA PARTS ARE NOT INCLUDED Ford part number D1AZ-9600-F. ...

D2AF-9600-BC Air cleaner base for all 1972 H code 351-2V engines. About 14.78" inches in diameter. Ford part number D2AZ-9600-B.

D3ZF-9600-AA Air cleaner base for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number D3ZZ-9600-A.  Does not include snorkel.

D2ZF-9600-EA Air cleaner base for all 1972 Q code 351CJ engines. About 16.79" inches in diameter. Could also be found under casting number D2ZF-9600-KA. Ford part number D2ZZ-9600-E.

D0ZF-9600-M Air cleaner base for all 351C engines, both H code 351C-2V and M code 351C-4V engines. Could also be found under casting number D0ZF-9600-Z. About 17-3/4" inches in diameter (although the Ford MPC shows it to be 17.00 inches). *Excludes 1970 351-2V Windsor engines. Ford part number D0ZZ-9600-M.

C8AF-9600-G Standard air cleaner base for all 351 engines, H code 351-2V and M code 351-4V. About 17.84" inches in diameter. Identified with the square nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-C. Ford part number C8AZ-9600-D.

D0ZF-9600-B Air cleaner base for 1970 H code 351-2V Windsor engines. About 17.84" inches in diameter. Ford part number D0OZ-9600-B. *Excludes 351C Cleveland engines. Click on images to enlarge. ...

This air cleaner was used on the 1967 GT Cougar only. It was possible to order a 390 GT motor for your Cougar without ordering the 390 GT package. Cougars equipped with the 390 6.5 Litre engine that did not come with the GT package would have used the air cleaner with a long tapered snorkel and painted lid. Cougars sold in California had the 90 degree elbow for the closed emissions system. *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with...

C7ZF-9600-F Air cleaner base for 390-4V with GT package. Unique air cleaner without a snorkel. Instead it has dual rectangular inlets covered by metal screens or expanded metal. About 16.79" inches in diameter. California open PCV emissions system with Thermactor air pump. Ford part number C7ZZ-9600-F. Click on images to enlarge. ...

Factory air cleaner base for all S code 1967 Mercury Cougar non-GT or with the 6.5 Liter option, 1967 Mustang 390-4V without the GT option, and 1967 Ford Thunderbird with Z code 390-4V or Q code 428-4V engines. 49 state versions like this do not have the steel elbow on the air cleaner side which became standard on cars beginning in 1968.

Black plastic elbow that clips onto the air cleaner base of most 1971-73 Mercury Cougar and most other Ford, Mercury, and Lincoln cars with V8 engines. Elbow for hose from PCV valve to stock air cleaner bases.

NOS air cleaner breather element filters for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, cartridge holder not included.Packaging may vary

Concourse Correct FLAPPER DOOR ASSEMBLY for vehicles equipped with ram-air. Includes: door, pivot rod, and 2 retaining clips Fits 1969 390GT and 1970 Boss 302, 351W, 351C. Replaces Ford Part #: C9ZZ-9610-A

Round ring shaped gasket that goes on top of the carburetor. Protects and seals the carburetor to the air cleaner.

Aluminum flexible tube that connects the vapor canister to the air cleaner. To give this the look of the originals that had a black paper exterior coating you can spray paint it flat black. If anyone knows of a source to buy the original paper coated foil tubes we would like to hear from you. Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct.3ft long 7/8" O.D. 3/4" I.D. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A...

This lid is about 17-1/2 inch in diameter. Identified by the wagon wheel like spokes in the stamping. 1967 Mercury Cougar and Ford Mustang with 289 engines. Additionally this lid was used for the Canadian export Cougars and Mustangs in 1968, they continued to use the open emissions system.

This lid is about 17-1/2 inch in diameter. Identified by the wagon wheel like spokes in the stamping. 1967 Mercury Cougar and Ford Mustang with 289 engines. Additionally this lid was used for the Canadian export Cougars and Mustangs in 1968, they continued to use the open emissions system. Nice clean lid with no holes or other noticeable damage.

Chromed air cleaner lid for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number for the air cleaner assembly is D3ZZ-9600-A. The air cleaner lid by itself doesn't have a number. This air cleaner lid was never chromed from the factory.

This Ford engine blue painted lid, is about 16-3/4 inch in diameter. Identified by the spokes in the stamping. We get these lids with and without a center ring underneath. The ring can be removed with a bit of effort if you desire. There is a chromed version of this air cleaner lid that was found on 1967 and 1969 Mercury Cougar and Ford Mustang with S code 390-4V engines. Additionally this lid was used on 1969-70 Q code 428CJ or non-ram air Cougars and Mustangs. We believe that this lid was...

This rechromed lid is found on many years and cars 1968 - 1971. The diameter of the lid is just over 17 3/4", fits on 17.84" air cleaner bases. Application Mercury Cougar Ford Mustang 302 and 351 engines without ram air. Ford / Mercury have had various part numbers listed for this basic lid over the years. The primary difference was the original lids included an engine size sticker. That is why there are so many listings, the basic part number is 9661. This lid was chromed in several...

This was the inner air cleaner lid used on the Mercury Cougars equipped with a 428 Ram Air Cleaner or 429 Cobra Jet Ram Air Cleaner assembly. Although you will often find chrome under the blue engine paint on these lids they are in fact supposed to be painted from the factory. This lid is 14-1/8 inches in diameter. The reason you will often see chrome underneath the paint is that this is the same lid used on the 1967 427 GTE, 289 HiPo equipped early Mustangs and 390 GT / GTA Fairlanes and...

This particular mid-plate has a seemingly factory installed tab welded to the backside.  This unit was not found on a 1968 Mercury Cougar but does have the wrinkles indicative of a 68 lid.  The tab located at 12 o'clock makes it rather difficult to install the Air Cleaner to hood seal. If anyone can clue us in to the exact application of this oddball part please chime in!  Check out: http://428cobrajet.org/id-air-cleaner-68.html to learn more about the subtle differences between...

This lid is found on many years and cars 1968 - 1971. The diameter of the lid is just over 17 3/4", fits on 17.84" air cleaner bases. Application Mercury Cougar Ford Mustang 302 and 351 engines without ram air. Ford / Mercury have had various part numbers listed for this basic lid over the years. The primary difference was the original lids included an engine size sticker. That is why there are so many listings, the basic part number is 9661. This lid was chromed in several applications,...

NOS air cleaner breather element filter assembly for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, "AUTOLITE" marked also FA-79.  Casting number D0OF-9D696-A. Ford part number D0OZ-9D695-A.

Used air cleaner base plug, plugs the area pre cut from the factory. Typically found on 70 - 73 Cougar and Mustang.

Original retainer that clips onto the breather element nipple sticking through the air cleaner base and holds the elbow for the hose going to the PCV valve.  Ford calls this part the Crankcase Emissions Filter Retainer.The Master Parts Catalog says this part is only for 1971 and newer cars, but this part has been found on low mile 1970 cars as well. Ford part # D1AZ-9E628-A.

One year only valve for the 390 S code engine.  Ford Part Number C8OZ-9D612-A This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for...

One year only valve for the 390 S code engine.  Replaces Ford Part Number C8OZ-9D612-A

A nice reproduction of the standard air cleaner wing nut. This version was used on most Ford products through the 1980's.

This is an open style air cleaner assembly devoid of any snorkel. We send the tops out for a quality rechrome and we can inform you of what dates we have at any one time (date is stamped on bottom, 2 digits year and month, very faint). Most are happy to use the Mustang K code 289 HiPo reproduction air cleaner assembly we sell, which Mercury used on W code GT-E's with 427's. There's also a reproduction unit available.Ford part # C5ZZ-9600-C, C5ZF-9600-D. ...

Nice used California emissions air cleaner assembly, includes base with elbow, snorkel, heat riser and air cleaner lid. Application is any 1967 Mercury Cougar or Ford Mustang with C code 289-2V or A code 289-4V engines with closed emissions as sold in California. Elbow on air cleaner connects to the oil fill cap with a rubber hose. All good parts as shown, thermal switch in air cleaner snorkel may not work, and no we cannot test them.Even if you are not currently running all original parts...

Correct for closed emission system Cougars sold only in California. Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. California emissions with the metal elbow for hose connection to the oil filler cap.

D1ZF-9600-DA Air cleaner base for all 1971 Cougars with the M code 351-4V engine. About 17.76" inches in diameter. Could also be found with casting number D1ZF-9600-DB or D1ZF-9600-DC. Ford part number D1ZZ-9600-D.

D3ZF-9600-BA Air cleaner base for all 1973 Q code 351CJ engines. About 16.75" inches in diameter. Ford part number D3ZZ-9600-B.

This is the correct base for a 1972 Mercury Cougar with a Q code 351-4V Cleveland engine. It came with a painted lid unless your car happened to have been ordered with the "Sporty Exhaust" package and then a chrome lid was included. One year only air cleaner for the Cougar. Ford casting number D2ZF-9600-EA or D2ZF-9600-KA.

C8OF-9600-B For all 1968 S code 390-4V engines, regardless of GT or 6.5 badges. About 17.00" inches in diameter. Unique feature on this base is the addition of a round vacuum operated valve on the drivers side. Ford part number C8OZ-9600-B *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with what you will find on the open market at swap meets and private party sales. Our primary intent in listing these is for our customers to use this...

C8OF-9600-B For all 1968 S code 390-4V engines, regardless of GT or 6.5 badges. About 17.00" inches in diameter. Unique feature on this base is the addition of a round vacuum operated valve on the drivers side. Ford part number C8OZ-9600-B. Our grade B base may have extra holes drilled, possibly dents or rust. Call for details on exact blemishes. Current base is missing the round vacuum valve completely.

Factory air cleaner base the all S code 1967 Mercury Cougar non-GT or the 6.5 Liter option, 1967 Mustang 390-4V without the GT option, and 1967 Ford Thunderbird with Z code 390-4V or Q code 428-4V engines. California emissions version which has the closed emissions. Note the elbow on the side which attaches with a hose to the oil fill cap.This is the one everyone uses to make a correct 1969-70 428 Cobra Jet ram air or 1967 GT air cleaner base . This basic bowl design was used by the Ford...

D0ZF-9600-C Air cleaner base for the 1970 G code Boss 302 Eliminator engines. Could also be found under casting number D0ZF-9600-R. About 16.79" inches in diameter. Ford part number D0ZZ-9600-C.

This air cleaner base (Ford part number C8OZ-9600-C) was used on all 1969 BOSS 302, 1969 S code 390 IP (Improved Performance) Cougars and 1969 Cougars equipped with a Q code 428 CJ. The air cleaner shown here was taken from a 1969 390 S code with a 21C date (March 21st). The Cobra Jet Cougars saw a minor change in these air cleaners on February 17th (or close) 1969. The change included the addition of a small metal strap that was spot welded to the lower portion of the passenger side of the...

D0ZF-9600-E Air cleaner base for 1970 Q code 428 Cobra Jet engines without the ram-air option. Identified with the rectangular vacuum operated valve on the driver side. Additionally the 1970 air cleaner has a star marked plug next to the snorkel on the passenger side. Starting in 1970 this base also received a plastic elbow for mounting the breather hose to the oil fill cap. About 16-3/8" inches in diameter. Could also be found under casting number D0ZF-9600-K. Ford part number D0ZZ-9600-E. ...