All Products

1969 Driver side Sport mirror with rechromed Cougar base. Mirrors disassembled, and reassembled with our rechromed OEM Cougar mirror base. Obviously will need to be repainted, but will have a fresh chromed mirror base like on the 1969 XR7's. Comes as shown with used glass and working remote. Door panel bezels, door gasket, new glass, and nuts available separately. 

*NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS. Precision cut replacement lens for any Ford product with sport mirror. This fits any FoMoCo Sport mirror 69 and up. Comes with two round pieces of double sided tape.  Lens measures 4 3/8 X 2 7/8. Do you have questions about installing the...

Empty shell / head / housing only for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror heads found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. Most customers find our reproduction unit to be a better value as it comes with the mirror and mounting hardware. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

Fits and looks identical to the 1970 mirror base but is slightly taller. The difference in height between the two versions is indiscernible to the naked eye. Very nice product, works well with original mirror heads, save your hardware. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video Check out this video ...

Used passenger side (right hand) sport mirror for the Mercury Cougar Eliminator. The Ford service replacement part number for the complete assembly is DOOZ-17682-D with a casting # on the base that reads D0OB-17713-AW. This is the correct right hand mirror for your 1970 Eliminator. It was available over the Ford counter to be placed on any 1969-70 Cougar but the 1970 Eliminator is the only model that came from the factory with it. Unlike the driver side door there is no factory embossed area...

Reproduction passenger side (right hand) manually adjusted sport mirror for the Mercury Cougar or 1970-1971 Ford Torino / Cobra / Ranchero / Cyclone. Our kit includes everything needed to mount a bullet style sport mirror to the passenger side of your vehicle. This reproduction unit is far more durable than the originals which were cast with a softer metal. The Ford service replacement part number for the original complete assembly was D0OZ-17682-D. The base in...

Reproduction manually operated passenger side (right hand) sport mirror with a chrome base for the Mercury Cougar XR7. The XR7, Sports Special, and Eliminator never came with a passenger side (right hand) mirror from the factory, but we are offering this one to make driving your Cougar a little safer. The use of a chrome base is unique to the early production 1969 XR7, but that changed late in the 1969 production run when Mercury changed to a painted base like the ones used on the Eliminator...

Dimensionally correct reproduction that will allow you to use an original XR7-G remote mirror or the manual mirror found on the Hurst Oldsmobile or AMC Rambler Scrambler. Do you have riv-nut questions? Here are riv-nut answers!

This driver side (left hand) remote mirror was used only on the 1968 XR7-G Cougar and is a direct bolt on for any 1967-68 Cougar and uses the same mirror base gasket. It comes ready to install with the exception of correct adapter base that we sell separate. The casting and chrome are good quality here, the only thing we find issue with is the quality of the mirror lens and the fact that the lens is rather loose in its setting. It does hold its position well as you drive down the road. Do you...

Good used external XR7-G driver side (left hand) rear view mirror with its adapter base, lens, and cables all in good used condition.  Do you have riv-nut questions? Here are riv-nut answers!

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

Quick disconnect that installs between the sight glass hose and the sight glass to A/C dryer hose. This unit also includes 2 O-rings (Part # L33,D2AZ-19D695-R or YF-368 and Part # H33, D2AZ-19D695-AE or YF-316)Quick Connect (Part # QF3,C1SZ-19B696-A or YF-241 and Part # QM6, C1SZ-19B695-A or YF-252).

New spray silicone lubricant for the squeaky Mercury or Ford. This spray lubricant is great for door hinges, trunk hinges, hood hinges and basically anything else that needs to be lubricated. Easy to use and will definitely de-squeak your vehicle.

Slat or pivot bracket for attaching the #4 rear most bow on a 1969-70 convertible top. Sold individually, one for each side needed for installation. Bushing is normally broken or missing, plan on sourcing or making a replacement bushing for the pivot. Ford part number C9ZZ-7650340-A.

Reproduction power steering control valve sleeve / socket for the Mercury Cougar or Ford Mustang.

New slotted pan head screw for mounting distributor points or condensers. Three total, per single advance Ford distributors. We know that these fit FoMoCo, Autolite and Motorcraft marked distributors 1967-73. These are AMK screws 8-32x9/32". Sold individually, but you likely need 3. 

New phosphate dipped slotted pan head screw for mounting distributor vacuum advances. Two total, per Ford distributor. We know that these fit FoMoCo, Autolite and Motorcraft marked distributors 1967-73. These are AMK screws 8-32x1". Sold individually, you will need 2. 

Reproduction Small Block Engine I.D. Bolt for the  1967 - 1973 Mercury Cougar / 1967 - 1973 Ford MustangSold individually 

Reproduction Small Block Intake Manifold Bolt for the 1968 -1969 Mercury Cougar - 1968 -1969 Ford MustangSold individually 

Used driver side smog hose. Connects the cylinder head smog tube check valve to the distribution "T" connector. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Ford part number C7OE-9C433-A.

Used passenger side smog hose. Connects the cylinder head smog tube check valve to the distribution "T" connector. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system.  Ford part number C6AE-9B459-A.

Thermactor smog hose installation clamps. Fits all Ford and Mercury 1968 S code 390-4V or W code 427-4V engines sold in the US. Additionally fits 1968-70 428 Cobra Jet and Super Cobra Jet engines. Set of clamps, several bolts and spacer as shown. Include bolts for pump pulley, top bolt on pump for adjusting bracket, and pivot bolt and spacer for pump.

Reproduction carburetor spacer plate vacuum port smog plug. Spring clamp included.

Reproduction Smog Pump Pully Bolt for the 1967 - 1968 Mercury Cougar or Ford MustangSold individually 

Reproduction hardware kit for installing the smog pump on cars with 390 / 427 / 428CJ engines from 1968-70. Including Cougar, Mustang, Torino, Ranchero, Cyclone, etc. Includes spacer, pivot bolt and washer, adjusting bracket bolts.

Complete original system as taken from a small block 289 from California. Comes with all items shown and you can choose from the large pulley as found on AC cars or the smaller pulley found on non AC cars. These systems are getting rather elusive to find with pliable hoses, correct Wittek clamps and correct fasteners. For years only those with big block cars cared to obtain original smog systems. That has changed... Even if you do not install it, if your car originally had it it will...

Set of thermactor smog tubes on any 1968 390GT, 1968 GT-E 427-4V, or 1968-70 428 Cobra Jet engines. Mercury Cougar and Ford Mustang, Torino, Cyclone, Ranchero, etc. These will work with original 390 or 428CJ cylinder heads drilled for air injection smog system from factory. Fits most FE engine applications that used the air pump smog system in 1968 with manual transmission. We also have the ferrules / nuts and other hardware.

Used snap in socket / pigtail for the clock light on your 67 - 68 Cougar. Also fits many other applications.

Used snap ring that is used to hold the bearing on you the steering shaft. This ring was used on 67 - 78 fixed columns and 70 - 78 tilt columns. Not for use on 67 - 69 tilt columns.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

This is the base model Sniper II kit, does not include Power Distribution module or any other options.  The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is...

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

Nice original snorkel that is correct for 2V and 4V 289 motors both 49 state and California Cougars. Due to the age of these parts, the internal thermal mechanism can be presumed to not work. Ford part number C7ZF-9A626-A.

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. NOS new old stock. ...

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. Click on images to enlarge. ...

This air cleaner is the early style with a vacuum actuated valve. 289-2V , 302-2V, and 302-4V engines prior to 4/2/1968. Ford part number C8AZ-9A626-A.

IMCO emissions air cleaner snorkel for a 1972 Cougar with 351-2V engines only. Non-California, 49 states only. (California required IMCO with NOx, see D2ZZ-9A626-B). Ford part number D20Z-9A626-C.

Application is for all 1971 Cougars with 351 engines, both 2V and 4V engines. Additionally it includes 1972 351-4V without NOx. Our research shows that NOx was a California emissions requirement. Ford part number D10Z-9A626-B. *Note - 1972 49 state 351-4V air cleaner snorkel.

California emissions 351-4V air cleaner snorkel. DSO 52 and DSO 53 Cougars with Q-code 351-4V engines.

Application is for all 1970 351 Cleveland engines, both 2 barrel and 4 barrel. This air cleaner snorkel is different from past years in that the opening is necked down and has a flared flange. It also has a small opening on the bottom for a metal "S" tube. Actuator has not been tested and may or may not be in working condition. Ford part number D0OZ-9A626-D. Click on images to enlarge. ...

Applications all 1969 351 engines, both 351-2V and 351-4V, and 1970 351W-2V engines after 2/2/1970. That is correct, after Feb 1970 the H-code Windsor engined 351's used a 1969 style air cleaner snorkel.The C9OZ-9A626-B snorkel looks the same, but is a bit longer than the 1968 C8AZ-D snorkel. Probably due to the taller deck height of the 351 over the 302 engine, and or the heat shield design. Please note: Wax stat is not tested, nor can we test them, sold as- is. Click on images to enlarge. ...

Application is for the beginning of the 1970 model year and only for H-code 351W-2V. Windsor engines only, from inception until 2/2/1970. Ford part number D0OZ-9A626-B.

This snorkel was found on the 1968 Mercury Cougar and XR7-G models with the 390 or 428 engine and the tall pent roof finned aluminum valve covers. The HERTZ model with the 390 engine used a chrome "Powered By Ford" chrome valve cover and did not need the extra length in the extension. NOS XR7-G Air Cleaner Snorkel for the 1968 Mercury Cougar Equipped with the 390 or 428 Engine and cast aluminum running cat valve covers. Ford part # C8WY-9A626-B. ...

Quality recreation made from original parts. Decent reproduction, slightly different than the original Ford version. The noticeable difference is the lack of square notch in the slop joint. Ford part of C8OZ-9A626-C. This snorkel comes to you in primer.

Application would be for only 1971 Cougars with the 429CJ option, either ram air or non-ram air. Original Ford part number was D0GY-9A626-A, this unit is from a Ford Truck, part #is from a D3TZ-9A626-G. This is a low cost alternative to a very rare part. Click on images to enlarge. ...

Application would only be for 1969 Boss 302 Eliminators and Boss2 Mustangs.Ford part number C9ZZ-9A626-C.

Although these are considered reproductions, they are actually put together from multiple parts of original excellent condition used snorkels. And, since there are multiple colors of Ford Blue, the supplier is leaving them as unpainted.Application would only be for 1970 Boss 302 Eliminators and Boss2 Mustangs. Ford part number D0ZZ-9A626-B.

Air cleaner pre-heater paper hose. Should fit most applications from 1970-73 Mercury Cougar and Ford Mustang with V8 engines. 2 inch inside diameter, we cut these to about 9 inches long. Correct black paper outside, flexible paper tube, kind of like a Slinky. Please verify your needed length, we leave them a bit longer than needed so that they fit more than one application.