Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Switch - A/C Thermostat Control - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang

A/C Thermostat Reproduction for the 1967, 1968, 1969. 1970. 1971, 1972, and 1973 Mercury Cougar and Ford Mustang

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1971 Mercury Cougar
1972 Mercury Cougar
1973 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang
1971 Ford Mustang
1972 Ford Mustang
1973 Ford Mustang

3 Review(s) 0

Item #: 41791

Price: $58.95

Cost: 4716

Earns: 236

Bonus: 0

Availability

Out of Stock, Discontinued - Ships: Unknown

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1971 Mercury Cougar
1972 Mercury Cougar
1973 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang
1971 Ford Mustang
1972 Ford Mustang
1973 Ford Mustang

Description

This A/C thermostat is made by the original supplier and stops the evaporator coil from freezing up.

Replaces Ford part #: C7ZZ-19618-A and D1ZZ-19618-A.

Specifications:

Shipping Weight: 0.50 LBS

(weight shown may be the dimensional weight)

3 Reviews (4.83 of 5 Rating)

4.83 out of 5 stars
Based upon 3 Review(s).

5 Stars

67%

4 Stars

33%

3 Stars

2 Stars

1 Stars

Write a review!

RoddinRob

2021

Perfect!

12/20/2021

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Installed in minutes. Works great. Always important NOT to kink the sensing tube.

R.B. Phillips

MA/NH border

2014

Really nice replacement made by Ranco (OEM supplier) in North America

9/7/2019

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Great
Great fit and function

Cons:

None

My 51 year old Ranco's black plastic top had one of its tabs break off from age. So I found this current production one from Ranco here at WCCC - and now you can store frozen foods in the Cougar again. The sensing lead is copper or copper-washed, and not as overlength as the picture. I ended up with only about a half-coil more than the original, just fine. The mounting tabs are dead-on, too. Top rank.

john

1/21/2014

4.50 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

tube length is longer than my 68 came with. do not cut! extra length wont hurt. be careful with bending tube. it is hallow and filled be careful. if you crack it bending it you will need a new one. will take some bending dont kink it

Product Q&A

Number of questions: 1

Please login to ask a question.

Question

Engine City Asked:

Hi is there a wirinig schematic for this switch, converting to factory AC Thanks..

September 25, 2022 7:16 PM

Answer

WCCC Admin Answered:

If you are working on a Cougar we offer free downloadable electrical schematics.

October 12, 2022 5:22 AM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 26094 [More info]
[More info] Vacuum Switch - A/C - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
This unit mounts on the main air chamber, it opens and closes the air vent. Made of nylon with a brass plunger. This unit is easy to test and can be seen by removing the glove box. Often it is the internal spring...

Buy

$38.25
Frequently
Purchased With

Item #: 11998 [More info]
[More info] Push on Retainer - A/C Heater Box Shafts - Repro ~ 1967 - 1973 Mercury Cougar - 1967 - 1973 Ford Mustang
Push on retainer for heating and air conditioning box levers or shafts. Fits 3/16 inch studs or rods. In most cases you will also want to get a washer to go against the pinched stops. Probably fits most Ford...

Buy

$0.45
Frequently
Purchased With

Item #: 25984 [More info]
[More info] Heater Core - Brass - w/ A/C - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Constructed from corrosion resistant copper and brass. Quality replacement part for a job you do not have to do again anytime soon. Replaces Ford Part #: C9ZZ-18476-B. Check out our videos below on how to replace a...

Buy

$112.35
Frequently
Purchased With

Item #: 41795 [More info]
[More info] Drain Hose - A/C Heater Box - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
This A/C evaporator drain hose is molded flex hose similar to the original, but it will need to be cut to the proper length. It is correct for 67 - 68 but can be made to work on 69 - 73. Replaces Ford part #:...

Buy

$10.05
Frequently
Purchased With

Item #: 25972 [More info]
[More info] Seals And Foam Kit - w/ A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Complete foam seal kit for the heater box, flappers, evaporator and heater core on a '67-'68 Cougar or Mustang with factory Air Conditioning. This kit is almost always needed when replacing your heater...

Buy

$10.55
Frequently
Purchased With

Item #: 26560 [More info]
[More info] End Caps / Seals - Heater Core - w/ A/C - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Correct for your 1967-68 Cougar or Mustang with A/C, but will work just fine in all 1969-73 Cougars and Mustangs with A/C. These pieces are also an excellent option for 1969-73 Cougars and Mustangs without A/C...

Buy

$14.27
Frequently
Purchased With

Item #: 26529 [More info]
[More info] A/C - Support Grommet - Condenser Tubes To Radiator - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Seals the hole where the A/C lines pass through the core support on the driver side on Mercury Cougars and Ford Mustangs. Replaces Ford part #: C7ZZ-19810.

Buy

$1.65
Frequently
Purchased With

Item #: 18734 [More info]
[More info] Grommet - A/C Evaporator To Case - Repro ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Reproduction rubber grommet for the air conditioning case. This grommet encloses the tubes for the evaporator, and slides into a slot on the heater box. Fits 1967-1969 Mercury Cougar and Ford Mustang. 1969 owners,...

Buy

$45.45
Frequently
Purchased With

Item #: 30102 [More info]
[More info] Vacuum Actuator - A/C Controls - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Reproduction vacuum actuator for controlling dampers and levers on the different year A/C boxes. These came in several different anodized colors. This is the basic valve with a single vacuum port.

Buy

$60.00
Frequently
Purchased With

Item #: 25971 [More info]
[More info] Seals and Foam Kit - Heater w/ Integral A/C - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
This kit is designed for the 1969-1970 heater A/C box. Replaces Ford Part #: C9ZZ-18500-A. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts...

Buy

$10.05
Frequently
Purchased With

Item #: 47896 [More info]
[More info] Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Usually ships in 3-5 business days.
Reproduction heater box with A/C for 67 - 68 Cougars and Mustangs. This new plenum is made of a sturdy hard plastic that should hold up much better than the original fiberglass boxes....

Buy

$413.85
Frequently
Purchased With

Item #: 31283 [More info]
[More info] Push Retainer - Floor Heat / Defrost Ducts - New ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
New push in retainer for any 1967-73 Mercury Cougar or Ford Mustang. These fasteners are used to attach the floor vent / duct to the blower housing, and to connect the defroster assembly to the blower housing, etc....

Buy

$0.85

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E1G06