All Products

Grille corner backing plate from a 1969 Mercury Cougar. This will be a passenger side with the deep square groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do...

Grille corner backing plate from a 1969 Mercury Cougar. This will be a passenger side with the shallow groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do not...

Protects door panels from the abrasive action of rotating handles. Made from a very hard nylon type material featuring the correct milky white color. Replaces Ford Part #: C5AZ-6223370-A.

Protects quarter panels from the abrasive action of rotating handles. Made from a very hard nylon type material featuring the correct milky white color. Replaces Ford Part #: C4SZ-6323370-A.

We are excited to bring these new reproduction chrome backup light bezels for the 1969 and 1970 Mercury Cougar to the market. The sockets, pigtails and lenses are not included so you will need to gently remove your originals and install them in these bezels. You can find the lenses here.

We are excited to bring these new reproduction assemblies for the backup lights for the 1969 and 1970 Mercury Cougar to the market. Includes a pair of bezels with lenses and gaskets. The sockets and pigtails are not included so you will need to gently remove your originals and install them in these bezels.NOTE: We've been informed that the reproduction lenses will need a bit of filing and sanding to properly fit into these reproduction bezels.

This kit is a time and money saver. Quality chrome bezels and all related parts are included. This is a direct plug-in, no modifications needed.

Hassle free kit makes it easy to install backup lamps. This kit includes mounting pads, lenses, gaskets, T1142 Bulbs and mounting hardware.

Great chrome on this reproduction backup / reverse light for the driver side (left hand) of the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15512.

Great chrome on this reproduction backup / reverse light for the passenger side (right hand) of the the Mercury Cougar or Ford Mustang. Lens, gasket, and bulb sold separately. Replaces Ford part # C7ZZ-15511.

Reproduction backup light mounting spacers for the Mercury Cougar or Ford Mustang.

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the AMPS light which is the right red light in the FUEL/TEMP gauge. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. This baffle is side specific, but resembles the OIL baffle. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

Plastic baffle for the instrument cluster on any 1967-68 XR7 Model Mercury Cougar. This is for the Brake system indicator bulb. There are a total of 1 of these plastic baffles for a 1967-68 XR7 Model Cougar, and it goes into the XR7 housing and shares space with the tachometer. Originally, these had a rubber seal on the lip. No more seals. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with a Standard Model dash cluster. ...

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the HiBeam indicator bulb. One of the  holes is not used. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

Plastic baffle for the instrument cluster on any 1969-70 Standard Model or XR7 Mercury Cougar. This is for the HiBeam indicator bulb, and both right and left turn signals. There are a total of 3 of these plastic baffles for a 1969-70 Cougar. Ford part number C9WY-10A990-A .

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the left turn and brake system indicator bulbs. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. Similar to the right turn shroud, there is a locating nub that makes it different. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the OIL light which is the left red light in the FUEL/TEMP gauge. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. This baffle is side specific, but resembles the AMPS baffle. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

Oil pan baffle as found on all 1969-70 Ford and Mercury products with R or Q code 428CJ or 428SCJ engines. This baffle is sandwiched between the oil pan and the block.

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the right turn and seat belt indicator bulbs. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. Similar to the left turn shroud, there is a locating nub that makes it different. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

Plastic Baffle for several warning lights under the tachometer in a 1969-70 Mercury Cougar XR7 instrument cluster. Originally, there would have been foam on the open side. Foam will be missing or in poor shape likely. 1969   PARK 1970   BELTS and LIGHTS Ford part number C9WY-10A990-D.

Plastic baffle for the instrument cluster on any 1967-68 Standard Model Mercury Cougar. This is for the wiper switch. There are a total of 6 of these plastic baffles for a 1967-68 Standard Model Cougar. This baffle has a blacked out cone as shown. Ford part number C7WY-10A990-_ , exact suffix letter is unknown. *Note - will not work with an XR7 dash cluster

This is the 3 hole version of the ball joint for the 1967 - 1973 Cougar and Mustang. Right is same as left. Two required per car. Hardware included. made in Tiawan.

This is the 4 hole version of the ball joint for the 1967 - 1969 Cougar and Mustang. Right is same as left. Two required per car. Hardware included.

Reproduction disc brake hose bolt for any 1968-73 Mercury Cougar and generally all other Ford cars with factory disc brakes. Special hollow bolt with cross drilled hole. Attaches the high pressure hose to the caliper.

Reproduction barrel nut or insert for attaching "Cougar" fender script to the fenders. Each Cougar emblem uses 4 of these barrel nuts which insert into the fender first, and then the Cougar emblem. Additionally, these nuts also go into the C pillars for attaching the XR7 badge or medallion on each side. Two barrel nuts per side for the XR7 medallions. Barrel nuts sold individually. The install is basically the same as shown here: https://youtu.be/mcd788WUNns ...

Barrel nut for the 3/16" stud found on the 6.5 Liter badge and the GT badges that mount on the fender of 1967 Mercury Cougar and Mercury Cyclone GT with the S code 390 engine. Same GT badge on the 1968 Mustang GT models. Item sold individually. The install is basically the same as shown here: https://youtu.be/mcd788WUNns

These barrel nuts or clips are exactly like the original ones inserted into the trunk for attaching 1967-68 "Mercury" script, and 1971-72 Mercury Cougar "Mercury" Hood scripts. The manufacturer indicates that these tubular nuts fit 1/8" holes. Pin size on those emblems are 3/32". These clips are also used to attach the 1967 quarter panel emblems. The install is basically the same as shown here: https://youtu.be/mcd788WUNns ...

Tubular or barrel nut for attaching our reproduction "C" pillar XR7 emblems with studs. We found these fasteners to install the emblems without disturbing the headliner of a 1967-68 Mercury Cougar. These are also suitable for installing this emblem onto the trunk lids of 1971-73 Mercury Cougar XR7 models. The originals were flat backed and glued onto the deck lids with adhesive. These tubular nuts require two 7/32" holes be drilled. These mount on the lower part of the roof behind the...

C8AF-9600-C Standard air cleaner base for all 1968 289-2V (C code), 302-2V (F code), 302-4V (J code), and 390-2V (X code). This is for a closed emissions system (IMCO), that included an oil cap with a fitting going to the air cleaner base and a PCV valve in the passenger side valve cover. About 17.84" inches in diameter. Identified with round nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-G. Ford part number C8AZ-9600-D.*Note - Canada did not...

C7ZF-9600-C Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. 49 state open PCV system. No dents, dings, rust or other damage. *Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.*Excludes California. Ford part number C5ZZ-9600-D. Notice the lack of metal elbow for venting back to the oil filler cap. Click on images to...

Good used air cleaner base with none of the attaching parts. Will have a dent, rust inside or other repairable flaw. Correct for 289 2V or 4V non California Emissions equipped Cougar.*Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.

D1AF-9600-FA Air cleaner base for all 1971 Cougars with the H code 351-2V engine. About 17.84" inches in diameter. Could also be found with casting number D1AF-9600-FB or D1AF-9600-FC. IMAGES BELOW ARE FOR REFERENCE ONLY, EXTRA PARTS ARE NOT INCLUDED Ford part number D1AZ-9600-F. ...

D2AF-9600-BC Air cleaner base for all 1972 H code 351-2V engines. About 14.78" inches in diameter. Ford part number D2AZ-9600-B.

D3ZF-9600-AA Air cleaner base for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number D3ZZ-9600-A.  Does not include snorkel.

D2ZF-9600-EA Air cleaner base for all 1972 Q code 351CJ engines. About 16.79" inches in diameter. Could also be found under casting number D2ZF-9600-KA. Ford part number D2ZZ-9600-E.

D0ZF-9600-M Air cleaner base for all 351C engines, both H code 351C-2V and M code 351C-4V engines. Could also be found under casting number D0ZF-9600-Z. About 17-3/4" inches in diameter (although the Ford MPC shows it to be 17.00 inches). *Excludes 1970 351-2V Windsor engines. Ford part number D0ZZ-9600-M.

C8AF-9600-G Standard air cleaner base for all 351 engines, H code 351-2V and M code 351-4V. About 17.84" inches in diameter. Identified with the square nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-C. Ford part number C8AZ-9600-D.

D0ZF-9600-B Air cleaner base for 1970 H code 351-2V Windsor engines. About 17.84" inches in diameter. Ford part number D0OZ-9600-B. *Excludes 351C Cleveland engines. Click on images to enlarge. ...

This air cleaner was used on the 1967 GT Cougar only. It was possible to order a 390 GT motor for your Cougar without ordering the 390 GT package. Cougars equipped with the 390 6.5 Litre engine that did not come with the GT package would have used the air cleaner with a long tapered snorkel and painted lid. Cougars sold in California had the 90 degree elbow for the closed emissions system. *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with...

C7ZF-9600-F Air cleaner base for 390-4V with GT package. Unique air cleaner without a snorkel. Instead it has dual rectangular inlets covered by metal screens or expanded metal. About 16.79" inches in diameter. California open PCV emissions system with Thermactor air pump. Ford part number C7ZZ-9600-F. Click on images to enlarge. ...

Factory air cleaner base for all S code 1967 Mercury Cougar non-GT or with the 6.5 Liter option, 1967 Mustang 390-4V without the GT option, and 1967 Ford Thunderbird with Z code 390-4V or Q code 428-4V engines. 49 state versions like this do not have the steel elbow on the air cleaner side which became standard on cars beginning in 1968.

NOS C8OF-9600-B For all 1968 S code 390-4V engines, regardless of GT or 6.5 badges. About 17.00" inches in diameter. Unique feature on this base is the addition of a round vacuum operated valve on the drivers side. Ford part number C8OZ-9600-B

D0AZ-6331604-A

Reproduction battery heatshield that fits many applications from 70-73, on most hi-performance engines. It was often the first part discarded but serves a real purpose.

Reproduction group 27 battery heat shield that fits many Mercury Cougar and Ford Mustang applications from 1967-70, on most hi-performance engines. It was often the first part discarded but serves a real purpose. Nice American made part, stamped with Ford numbers C7ZB10A682B and C7OB10A682B. There is also a D0... sized for group 24 heat shield offered for 1970-73. *Trivia - these battery heat shields were often trimmed down to fit group 24 batteries.Click on the link below to find some...

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. Standard Draw pictured above, High Draw pictured to the left. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C7ZZ-14300 ...

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. For 1972-73 Mercury Cougar and Ford Mustang all with V-8 engines.Positive cable is 10 1/4" center to centerNegative cable is 42" center to centerGround wire is 41" center to center Replaces Ford Part # :...

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For any 1970-71 Mercury Cougar or Ford Mustang with 302 or 351 engine and 43-55 AMP alternators. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces...