Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 375
$1.40 Price: $1.64

Buy Details

Availability: In-Stock Item
Item #: 32390 -

3/8 washer for installation of idler, adjusting pulleys, and brackets, on some 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, 1-2 are typically used per car. 

$1.85 Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 32389 -

3/8-16x7/8 Bolt for installation of idler, adjusting pulleys, and brackets, on most 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, up to 8-9 are typically used per car. 9/16" hex, washer head bolt.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 26389 -

Decal Text: Autolite EV-68C D3OZ-6A666-A Replaces Ford Part #: D3OZ-6A666-A.

$0 Price: $21.35

Buy Details

Availability: In-Stock Item
Item #: 15034 -

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. Air Filter Height (Inches) : 2.51" Air Filter Height (mm) : 63.75 mm Air Filter Bottom I.D. (Inches) : 11.203" Air Filter Bottom I.D. (mm) : 284.56 mm Air Filter Bottom O.D. (Inches) : 13" Air Filter Bottom O.D. (mm) : 330.2 mm Air Filter Top I.D. (Inches) : 11.2" Air Filter Top I.D. (mm) : 284.56 mm Air Filter Top O.D....

$26.00 Price: $40.23

Buy Details

Availability: In-Stock Item
Item #: 41290 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $18.23

Buy Details

Availability: In-Stock Item
Item #: 41663 -

Cork Oil Pan Gasket for the 351 Cleveland Cork Oil Pan Gasket in the 1970, 1971, 1972 and 1973 Mercury Cougar or Ford Mustang.

$0 Price: $20.79

Buy Details

Availability: In-Stock Item
Item #: 41616 -

Cork valve cover gaskets for any 351C or 351 Cleveland Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $28.65

Buy Details

Availability: In-Stock Item
Item #: 41617 -

Rubber valve cover gaskets for any 351C Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$26.00 Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 41291 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25553 -

Ford started using this alternator adjusting bracket sometime in 1973. It mounts to the rear of the alternator. Fits any 1973 Mercury Cougar and Ford Mustang and likely many other Ford cars with 351 engines. It works with the 1970-73 front mounting bracket. Replaces Ford part number D3AE-10145-C.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23391 -

384543-S8 Power steering pump adjusting spacer for use without air conditioning. For most 1970 - 1973 Mercury Cougar or Ford Mustang with 351C engines. Spacer dimensions: 7/16" I.D. and 1/2" thick.*Note 1970 and later cars with 302 or 351W engines use a 3/4 inch spacer.

$0 Price: $125.35

Buy Details

Availability: In-Stock Item
Item #: 15704 -

This air cleaner assembly never came from the factory on any Cougar, but was an over the counter option available from your Ford dealer. If you have a very nice hood blanket I would think twice before using it in conjunction with this air cleaner assembly as it will leave an imprint. To avoid this problem with small block cars you can use a lower profile carburetor spacer, but on big block cars this is not an option due to the already thin design of the factory carburetor spacer. This will...

$0 Price: $172.45

Buy Details

Availability: In-Stock Item
Item #: 11975 -

Reproduction Group II customizable oval air cleaner with the optional "Walking Cat" for your Mercury Cougar. Good quality reproduction that will go nicely with our Cougar aluminum valve covers. The finish on the black portion is not the same as the crinkle finish on the valve covers but do know the crinkle finish can be added with an aerosol product found from most paint suppliers. If you are using a vented oil filler cap you will need to drill a hole in the base to insert the rubber...

$95.00 Price: $108.77

Buy Details

Availability: In-Stock Item
Item #: 26025 -

This 'Cal Custom' style 14" Air Cleaner Assembly looks great and really compliments our new matching oil pan and valve covers. These covers offer a true "old school" look. Clean look with no visible mounting nut. Lid has a 1/4x20 nut attached on the bottom side (requires shortening carburetor stud). Kit includes aluminum finned top, air filter, and bottom plate.

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26360 -

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner.  11-1/2 inch span, fits the smaller diameter air cleaner available in 1972.Fits the following models with a 351 2 barrel Regular Fuel engine:...

$0 Price: $8.87

Buy Details

Availability: In-Stock Item
Item #: 31684 -

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 2 barrel Regular Fuel engine: 1973 Cougar 1973 Mustang ...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26383 -

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-4V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. located on the top of the air cleaner. *Note - Will not fit 1968-72 air cleaner lids that are 18 inches in diameter.Fits the following models with a 351 4 barrel engine : 1973 Cougar1973 Mustang ...

$0 Price: $17.87

Buy Details

Availability: In-Stock Item
Item #: 19979 -

Replacement air filter for the 1967 - 1973 Mercury Cougar 14" 'Cal Custom' Aluminum Finned Air Cleaner Assembly.

$0 Price: $10.89

Buy Details

Availability: Out of Stock
Item #: 20672 -

Stud that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 351C / 429CJ pedestals from 1970 - 1973.*Note - Excludes 289 / 302 / 351W / 390 / 428CJ engines.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27449 -

Reproduction stud and nut assembly that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 289 / 302 / 351W / 390 / 428CJ pedestals from 1967 - 1973. Stud is threaded into the cylinder head for easy installation of the cast iron pedestal bracket.*Note - Excludes 351C and 429CJ.

$0 Price: $25.45

Buy Details

Availability: In-Stock Item
Item #: 19976 -

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. Air Filter Height (Inches) : 1.974" Air Filter Height (mm) : 50.14 mm Air Filter Bottom I.D. (Inches) : 9.03" Air Filter Bottom I.D. (mm) : 229.36 mm Air Filter Bottom O.D. (Inches) : 11.25" Air Filter Bottom O.D. (mm) : 285.75 mm Air Filter Top I.D. (Inches) : 9.03" Air Filter Top I.D. (mm) : 229.36 mm Air Filter Top O.D....

$0 Price: $23.27

Buy Details

Availability: In-Stock Item
Item #: 19978 -

These filters feature the correct color of filter paper and an red/orange molded face. In addition, they have the correct "round hole" design on the outer shell. Fits Mustang 1965-67 K code HiPo 289 and 1968 Mercury Cougar GT-E W code 427-4V engines, that were originally equipped with the chrome high performance air filter assemblies. Please note: this filter will NOT fit a standard Ford air cleaner Replaces Ford Part #: B7SZ-9601-A. ...

$0 Price: $32.71

Buy Details

Availability: In-Stock Item
Item #: 19977 -

Correct dimensions, good fit. Will show minor cracks in rubber but will not affect performance and cannot be seen when installed. Replacement air cleaner for the 1967 - 1973 Mercury Cougar Walking Cat Oval Air Cleaner, as well as other Ford oval air cleaners.

$0 Price: $66.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25600 -

D3ZF-9600-AA Air cleaner base for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number D3ZZ-9600-A.  Does not include snorkel.

$0 Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 42007 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. For 1972-73 Mercury Cougar and Ford Mustang all with V-8 engines.Positive cable is 10 1/4" center to centerNegative cable is 42" center to centerGround wire is 41" center to center Replaces Ford Part # :...

$0 Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41863 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For all 1972-73 Mercury Cougar or Ford Mustang with 43-55 AMP alternators and V-8 engines. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part...

$0 Price: $115.88

Buy Details

Availability: Out of Stock
Item #: 31918 -

NOS service replacement battery tray, may not be exactly like the assembly line tray. Group 27 battery tray is typical for cars with air conditioning and higher amp alternators. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars.  Replaces Ford Part #: D0OZ-10732-B.

$0 Price: $19.55

Buy Details

Availability: In-Stock Item
Item #: 25994 -

Exactly like the originals. This group 27 battery trays are a popular item for restorers since most of the originals have been destroyed by leaking batteries over the years. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars. Supplier misidentifies this part as D1ZZ-10732-B. Replaces Ford Part #: D0OZ-10732-B.

$0 Price: $18.77

Buy Details

Availability: In-Stock Item
Item #: 42058 -

These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27541 -

Used bolt and washer for attaching the crankshaft balancer or damper to the crank shaft. 15/16 inch hex head with 5/8-18 threads and 1.75 inches long. Basically fits all Mercury Cougar engines except the 1971 429 Cobra Jets engines. Fits 1967-73 289, 302, Boss 302, 351W, 351C, 390, 427, and 428CJ engines.Torque specifications for this bolt are 70-90 foot pounds.*Note does not fit 429 or 460 V8 engines or any 6 cylinder engines.

$0 Price: $2.25

Buy Details

Availability: In-Stock Item
Item #: 32454 -

Coil bracket mounting bolt for all V-8 engines as found in 1967-73 Mercury Cougar and Ford Mustang. This3/8-16 bolt attaches the coil bracket to various places on the engines. Either on the intake manifold or the cylinder head. Will fit stock Ford cast iron intakes as found 1967-73. AMK bolt B-13722.

$0 Price: $2.45

Buy Details

Availability: In-Stock Item
Item #: 41356 -

Used intake manifold bolt for the Mercury Cougar or Ford Mustang equipped with the 351C engine. This item is sold individually.Ford part # 56145-S.

$0 Price: $14.35

Buy Details

Availability: In-Stock Item
Item #: 16124 -

Bolts and installation kit for most 1970-73 Mercury Cougar and Ford anything, including Mustang with V-8 engines. Kit includes main pivot bolt and adjusting bolt as shown. Spacer not included, but available used.

$0 Price: $13.75

Buy Details

Availability: Rare / NOS Part
Item #: 41012 -

part # 383722-S Pivot bolt for use with the all steel 1970-73 power steering pump mounting bracket. NOS new old stock! Fits most all Ford 302/351 from 1970-73 with the above described bracket.

$0 Price: $1.05

Buy Details

Availability: In-Stock Item
Item #: 32603 -

Bolt and nut for the clamping the coil into the coil bracket as found in 1967-73 Mercury Cougar and Ford Mustang. Fits all of the various coil brackets used 1967-73 on most all Ford engines. This is a 8-32x1-1/2, 1/4 hex headed fine thread bolt and nut.  This is not the round headed slotted screw type that Ford also used.

$0 Price: $7.85

Buy Details

Availability: In-Stock Item
Item #: 32392 -

Bolt kit for installing the idler and adjusting pulley on any 1970-73 Mercury Cougar / 1970-73 Ford Mustang or 1970-73 Ford / Mercury with 302, 351W, and 351C engines. 4 bolts 3/8-16x7/8 inch washer head bolts and 1 thick 3/8 washer.  

$0 Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 31569 -

New Bolt kit, for the installation of a water pump on any Ford 351C or 351 Cleveland engine. Fits all 1970-74 Mercury Cougar and Ford Mustang with 351C, 351CJ engines. 11 total pieces in the kit as shown.

$0 Price: $37.80

Buy Details

Availability: In-Stock Item
Item #: 25908 -

Set of 12 bolts for the intake manifold on any factory 1970-74 Ford 351C-2V engine. AMK F-1313.*Note - Excludes 351C-4V and 351W engines.

  • < Prev