Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

This category contains Exterior Mirrors and Parts for the 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mercury Cougar


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 87
$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 14042 -

A nice reproduction of the inner door remote mirror bezel. This is concours quality and an exact fit and finish. Just like the originals, these are made from chromed plastic. Comes with correct mounting hardware. Replaces Ford Part # : C8SZ-17B733-B

$14.99 Price: $24.39

Buy Details

Availability: In-Stock Item
Item #: 26777 -

*NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS. Precision cut replacement lens for any Ford product with sport mirror on the passenger side. This fits any FoMoCo Sport mirror 69 and up, left hand only. Comes with two round pieces of double sided tape. Keep in mind if your lens is bad and it...

$49.99 Price: $63.65

Buy Details

Availability: In-Stock Item
Item #: 13741 -

Reproduction passenger side (right hand) sport mirror lens for the Mercury Cougar or Ford Mustang and Torino.The mounting screw, that holds the mirror assembly in, is not included by default but is an optional addon. Replaces Ford part # C9AZ-17698-B. Dimensions: 4 7/16" x 2 15/16" This version does NOT include the wording "objects in mirror are closer than they appear". We also sell the version with the wording. Do you have questions about installing a passenger side mirror or using...

$0 Price: $81.85

Buy Details

Availability: In-Stock Item
Item #: 30630 -

Reproduction convex lens for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror lens assemblies found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. The screw that holds the mirror assembly in, is not included by default but is an optional addon. Replaces Ford part # C9AZ-17698-B This version included the words "objects in mirror are closer than they appear". We also sell the...

$0 Price: $80.87

Buy Details

Availability: Out of Stock
Item #: 24775 -

Lens with mounting hardware only for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror lens assemblies found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. Count on the glass being scratched. The value here is in adjustment / mounting hardware. This unit will be guaranteed to keep its adjustment and not be loose like many have become over the years. Keep in mind this item is...

$0 Price: $19.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26609 -

Original, used hard plastic 1969-70 driver side mirror pad / gasket. Fits 69-70 driver side Sport mirrors, and 69-70 driver side Chrome mirrors on the Mercury Cougar. Will not work on the passenger side. Notice this is not a flat pad but has an angle built into it. MUCH better fit than the mushy flat rubber repro. Ford part # C9WY-17724-A, Ford engineering # imprinted on gasket C9WB-17C701-A Do you have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $13.55

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 26614 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. Low quality reproduction thin rubber mirror gasket. This is nothing like the...

$0 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 26600 -

Driver side (left hand) mirror pad / gasket made of very soft rubber. Fits 69-70 driver side Sport Mirrors, and 69-70 driver side chrome mirrors on the Mercury Cougar. Will not work on the passenger side. While this is "better than nothing" it will never fit or look correct. We highly recommend purchasing our good used hard plastic mirror pad that is especially contoured to fit the door on the driver side. Replaces Ford Part # C9WY-17724. Do you have riv-nut questions? Here are riv-nut...

$0 Price: $26.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32440 -

This unique gasket is only slightly different from the driver side. The angle at the front is just a little different and notice it does not have a hole drilled for the remote mirror cable used on the driver side. This gasket was also used on the 1971 Ford Torino / Ranchero and Mercury Cyclone. This is an upgrade over the reproduction we carry for a 1969 - 1970 Cougar that has a passenger side Sport Mirror. The Ford Engineering number seen on the pad reads D1OB-17724-AA. Do you have questions...

$0 Price: $13.65

Buy Details

Availability: In-Stock Item
Item #: 22617 -

Authentic looking hard reproduction plastic Sport Mirror pad gasket. Correct for driver side Cougar Sport Mirrors 1971-73 and passenger side Torino / Cougar Sport Mirrors 1970-73. This is the best fitting gasket we've found so far. You may have to punch out the hole for the remote mirror cable. Replaces Ford #: C90Z-17724-B and D1WB-17C701-AB. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video Check out this video ...

$0 Price: $0.25

Buy Details

Availability: In-Stock Item
Item #: 32570 -

Pan head screw for attaching the sport mirror glass assembly into the passenger side painted sport mirror head. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. 8-32 pan head screw with Phillips screw head. Do you have questions about installing a passenger side mirror or using Riv-Nuts? ...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26143 -

Used, with little to no scratches, suitable for every day driver.

$0 Price: $27.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18537 -

Used grade A side mirror retaining nut for the 1968 Mercury Couga or Ford Mustang. Grade A's will have no scratches or dings.Ford part number C8ZZ-17B719-A

$0 Price: $44.85

Buy Details

Availability: In-Stock Item
Item #: 26152 -

Good grade "A" used nut with minimal scratches from removal process. The originals have deeper grooves and have a better luster on the chrome than the reproductions. This is a one year only design. Don't forget to check out our special tool used to remove and install this nut.

$0 Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 31504 -

Used grade A side mirror retaining nut for the 1968 Mercury Couga or Ford Mustang. Grade B's will have minor scratches or dings. Ford part number C8ZZ-17B719-A

$0 Price: $20.88

Buy Details

Availability: Out of Stock
Item #: 14398 -

Functional used nut with heavy scratches. The originals have deeper grooves and have a better luster on the chrome than the reproductions. This is a one year only design. Don't forget to check out our special tool used to remove and install this nut.

MSRP:$21.99
$21.99 Price: $21.47

Buy Details

Availability: Out of Stock
Item #: 26149 -

Replaces the original Ford part that features a # C7SB-17B732-A casting number. Basically correct for 1967 but works just as well on 1968 mirrors. These nuts are are not 100% correct for a 67 or 68, kind of a mixture of both.Very nice chrome quality at a reasonable price. NOTE: Our mirror nut removal tool works & fits perfectly with the original mirror nuts. However, you will find the tool will NOT fit this reproduction nut properly, it will require that it be filed a...

$25.00 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 14368 -

Replace that stripped or scarred retaining nut. This one is unique for your 1969 with remote mirror. Used on multiple FoMoCo applications starting in 1966 on the Mercury Comet. Replaces Ford Part #: C6GY-17B719-A.

$0 Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 31671 -

This mirror nut for the 70 - 73 Cougar or Mustang is made from stainless steel, as compared to the other reproduction we offer which is made from die cast metal. A few benefits of the stainless steel nut is that the finish on it will not tarnish over time, and that it cannot be cross threaded.

MSRP:$4.99
$4.99 Price: $0.95

Buy Details

Availability: In-Stock Item
Item #: 10665 -

We have created all of the components needed to economically install the steel nutsert or Riv-nut for the exterior mirrors that mount to the car doors. Our steel Riv-nut uses a 1/4 inch hole. You will need a 5/32 Allen or hex key, 3/8 inch wrench, and a 7/16 inch wrench. The Riv-nut needs to be assembled on the kit as shown prior to installation. The assembly is installed flush, in the pre-drilled hole. The Allen wrench and the 7/16 are held stationary, while the 3/8 wrench is used to tighten...

$0 Price: $74.55

Buy Details

Availability: In-Stock Item
Item #: 33652 -

Reproduction manually adjustable side view mirror in black for the Mercury Cougar and Ford Galaxie. This ambidextrous mirror works on either the passenger or driver side door and a gasket is included. Replaces Ford part # C7AZ-17696. Dimensions: Base Hole Spacing: 5-7/8" Base Length: 6-5/8" Overall Height: 5-1/8" Mirror Width: 5-1/8" Mirror Height: 3-5/16" Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $63.77

Buy Details

Availability: In-Stock Item
Item #: 13807 -

Reproduction manually adjustable side view mirror in chrome for the Mercury Cougar and Ford Galaxie. This ambidextrous mirror works on either the passenger or driver side door and a gasket is included. Replaces Ford part # C7AZ-17696. Dimensions: Base Hole Spacing: 5-7/8" Base Length: 6-5/8" Overall Height: 5-1/8" Mirror Width: 5-1/8" Mirror Height: 3-5/16" Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $177.44

Buy Details

Availability: In-Stock Item
Item #: 26520 -

Fantastic quality in all respects, concours quality. Don't forget to select a mounting gasket and mounting kit if needed. Replaces Ford part # C7WY-17696-A.*NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere!Hole spacing: 4 3/8" Do you have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $65.57

Buy Details

Availability: Out of Stock
Item #: 14702 -

Working driver side (left hand) grade "B" remote mirror with dull chrome. Don't have too high of expectation on this, it is 40 years old and comes from a car we most likely pulled from a brier patch...

$0 Price: $425.85

Buy Details

Availability: Out of Stock
Item #: 33094 -

New Old Stock driver side (left hand) mirror that has never been installed. Since the wand is recessed into the door panel on the 1969 Cougar, the wand is not prone to breaking off like the 1970 version which protrudes straight out. Ford part number C9WY-17696-A NOTE - Cable length should be 18" from the base of the mirror to the inner end of the remote wand assembly. In order to keep the cable from hitting the window, there's usually a clip to hold it away from the glass. This clip is hard to...

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 32588 -

Reproduction driver side mirror lens replacement for the 67 - 68 Cougar chrome side mirror. NOTE: The narrow end of the mirror goes up top on Cougar and is reversed for Mustang. These mirrors are manufactured for the Mustang, so the small supplier part number at the bottom will be upside down and on top for Cougar. 

$0 Price: $68.05

Buy Details

Availability: Out of Stock
Item #: 25978 -

Reproduction manually adjustable convex passenger side view mirror in chrome for the Mercury Cougar or Ford Galaxie.  Gasket and screws included. Replaces Ford part # C7AZ-17696. Dimensions: Base Hole Spacing: 5-7/8" Base Length: 6-5/8" Overall Height: 5-1/8" Mirror Width: 5-1/8" Mirror Height: 3-5/16" Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $187.97

Buy Details

Availability: In-Stock Item
Item #: 26226 -

Finally! A correct looking and fitting quality mirror for the passenger side of your 1967 - 68 Cougar. This is NOT a Mustang part made to "kind of work". For years our customers have called almost weekly asking for the "RARE" 1967-68 right hand outside mirror listed in their owners manual as an option available at their local "Lincoln - Mercury Dealer". The intention may have been to offer one but it actually never came to be... This product has been getting great reviews in the Cougar...

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 32589 -

Reproduction convex passenger side mirror lens replacement for the 67 - 68 Cougar chrome side mirror. NOTE: The narrow end of the mirror goes up top on Cougar and is reversed for Mustang. These mirrors are manufactured for the Mustang, so the small supplier part number at the bottom will be upside down and on top for Cougar. 

MSRP:$229.99
$229.99 Price: $191.75

Buy Details

Availability: In-Stock Item
Item #: 27041 -

Reproduction driver side (left hand) remote sport mirror for the Mercury Cougar XR7. This unit will come with a primered base and head so that you can paint it to match the rest of your car. If you have some good used 1970 mirrors for sale with or without the wand intact we would like to hear from you as these are getting very hard to find! 1970 was the first year you could get a factory installed sport mirror on your XR7, Sports Special, or Eliminator. If you would also like to have a...

$0 Price: $245.03

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25127 -

If your mirror is fine except a broken off wand (control lever) it is an easy fix. Since the wand is made of a soft metal it is not too hard to drill out the old and replace it with one of our threaded replacement units. One can also remove the entire adjuster assembly form another mirror that has a broken base and carefully attach it. If you have some good used 1970 mirrors for sale with or without the wand intact we would like to hear from you as these are getting very hard to find. Have...

$0 Price: $190.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25316 -

Good working used mirror with joystick intact and no cracks in the base. The mounting holes on the base are located 6 3/4" apart. Ford number inside the base D1WB-17743. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Do you have more questions about installing a passenger side mirror or using Riv-Nuts? Got a mirror lens that flops around in your Sport Mirror every time you hit a tiny bump in the road? WCCC to the rescue! Check out this video Check out...

MSRP:$229.99
$229.99 Price: $191.75

Buy Details

Availability: In-Stock Item
Item #: 27039 -

This reproduction remotely operated driver side (left hand) mirror is unique to the 1969 XR7 as evidenced by the chrome base. The Eliminator and Sports Special used a painted base, but in late 1969 the XR7 came with a painted base. This reproduction unit will come with the correct chrome base, but the head will be in primer for you to paint to match the color of your killer Cat. The XR7, Sports Special, or Eliminator never came with a passenger side (right hand) mirror from the factory, but...

$0 Price: $176.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18547 -

This driver side (left hand) mirror is unique to the 1969 XR7 as evidenced by the chrome base. The Eliminator and Sports Special used a painted base. Good used mirror with good chrome and a working adjuster. In late 1969 the XR7 came with a painted base. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $23.85

Buy Details

Availability: In-Stock Item
Item #: 26776 -

*NOTE* EARLY 69's USED THE 2112 MIRROR FOR BOTH PASSENGER AND DRIVER SIDES. LATE 69's USED TWO DIFFERENT SIZES FOR EACH SIDE (2124 for driver side, and 2112 for passenger side). BEFORE ORDERING, PLEASE CHECK YOUR DIMENSIONS AND COMPARE TO OUR LISTINGS. Precision cut replacement lens for any Ford product with sport mirror. This fits any FoMoCo Sport mirror 69 and up. Comes with two round pieces of double sided tape.  Lens measures 4 3/8 X 2 7/8. Do you have questions about installing the...

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24774 -

Empty shell / head / housing only for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror heads found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. Most customers find our reproduction unit to be a better value as it comes with the mirror and mounting hardware. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$113.99 Price: $167.75

Buy Details

Availability: In-Stock Item
Item #: 13889 -

Fits and looks identical to the 1970 mirror base but is slightly taller. The difference in height between the two versions is indiscernible to the naked eye. Very nice product, works well with original mirror heads, save your hardware. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video Check out this video ...

$0 Price: $248.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25034 -

Used passenger side (right hand) sport mirror for the Mercury Cougar Eliminator. The Ford service replacement part number for the complete assembly is DOOZ-17682-D with a casting # on the base that reads D0OB-17713-AW. This is the correct right hand mirror for your 1970 Eliminator. It was available over the Ford counter to be placed on any 1969-70 Cougar but the 1970 Eliminator is the only model that came from the factory with it. Unlike the driver side door there is no factory embossed area...

MSRP:$229.99
$229.99 Price: $191.75

Buy Details

Availability: In-Stock Item
Item #: 27042 -

Reproduction passenger side (right hand) manually adjusted sport mirror for the Mercury Cougar or 1970-1971 Ford Torino / Cobra / Ranchero / Cyclone. Our kit includes everything needed to mount a bullet style sport mirror to the passenger side of your vehicle. This reproduction unit is far more durable than the originals which were cast with a softer metal. The Ford service replacement part number for the original complete assembly was D0OZ-17682-D. The base in...

MSRP:$229.99
$229.99 Price: $225.00

Buy Details

Availability: In-Stock Item
Item #: 27040 -

Reproduction manually operated passenger side (right hand) sport mirror with a chrome base for the Mercury Cougar XR7. The XR7, Sports Special, and Eliminator never came with a passenger side (right hand) mirror from the factory, but we are offering this one to make driving your Cougar a little safer. The use of a chrome base is unique to the early production 1969 XR7, but that changed late in the 1969 production run when Mercury changed to a painted base like the ones used on the Eliminator...

$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 11391 -

Dimensionally correct reproduction that will allow you to use an original XR7-G remote mirror or the manual mirror found on the Hurst Oldsmobile or AMC Rambler Scrambler. Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $491.27

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11389 -

This driver side (left hand) remote mirror was used only on the 1968 XR7-G Cougar and is a direct bolt on for any 1967-68 Cougar and uses the same mirror base gasket. It comes ready to install with the exception of correct adapter base that we sell separate. The casting and chrome are good quality here, the only thing we find issue with is the quality of the mirror lens and the fact that the lens is rather loose in its setting. It does hold its position well as you drive down the road. Do you...

$0 Price: $1,074.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20015 -

Good used external XR7-G driver side (left hand) rear view mirror with its adapter base, lens, and cables all in good used condition.  Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 26213 -

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $1.92

Buy Details

Availability: In-Stock Item
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

$11.99 Price: $13.37

Buy Details

Availability: In-Stock Item
Item #: 26151 -

This is an exact replacement for a 1970 remote sport mirror. Nearly indistinguishable from a 1968. Obviously a larger ball and longer than found on 1969, 1971-73 remote mirrors. This threaded replacement wand will require you to cut 8/32" fine threads in your original controller. Your OEM mirror controller is made of a very soft metal so one can often install these as "self tapping".1967 and 1968 are different, see comparison picture. The 1968 version was rounded off due to new safety...

  • < Prev