All Products

Reproduction four piece bolt in tinted glass set for the 1970 Mercury Cougar or Ford Mustang convertible. This set does not come with any window trim so save yours for reuse. There are three versions of this glass. The clear version is just that, clear with no tint. There is a tinted version that will have a slight green tint to the glass. There is also a second tinted version that is called smoked and this version has a grey / brown tint to the glass. The clear and the tinted versions are...

New set of glue in style glass set for the Mercury Cougar and Ford Mustang convertibles.  There are three versions of this glass. The clear version is just that

Reproduction clear glue in five piece glass set for the Mercury Cougar. This set does not include the door window trim so save yours for reuse. There are three versions of this glass. The clear version is just that, clear with no tint. There is a tinted version that will have a slight green tint to the glass. There is also a second tinted version that is called smoked and this version has a grey / brown tint to the glass. The clear and the tinted versions are reproductions of original pieces...

Reproduction clear glue in four piece glass set for the 1969 Mercury Cougar or Ford Mustang convertible. This set does not come with the door glass trim so save yours for reuse. There are three versions of this glass. The clear version is just that, clear with no tint. There is a tinted version that will have a slight green tint to the glass. There is also a second tinted version that is called smoked and this version has a grey / brown tint to the glass. The clear and the tinted versions are...

Four piece CLEAR window glass set for the 1971

Reproduction clear four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with power windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

Complete five piece window glass set for the 1971

Reproduction CLEAR five piece glass set for the 1971-73 Mercury Cougar coupe or Ford Mustang hard top equipped with power or crank windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

Complete six piece window glass set for the 1971

Complete five piece window glass set for the 1971

Reproduction clear seven piece glass set for the Mercury Cougar. This set consists of a clear driver side (left hand) and passenger side (right hand) vent / wing window

Reproduction six piece clear glass set for your Mercury Cougar. This set does not come with any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

Complete 5 piece SMOKED glue in window glass set. Included are the door glass

Complete reproduction SMOKED glass set for manual crank.

Reproduction six piece extra dark tinted glass set for the Mercury Cougar coupe with manual windows. This set does not come with any of the window trim so save yours for reuse.

Reproduction glue in tinted five piece glass set for the Mercury Cougar coupe. This set does not come with the door glass trim so save yours for reuse. There are three versions of this glass. The clear version is just that, clear with no tint. There is a tinted version that will have a slight green tint to the glass. There is also a second tinted version that is called smoked and this version has a grey / brown tint to the glass. The clear and the tinted versions are reproductions of original...

Reproduction glue in tinted four piece glass set for the 1969 Mercury Cougar or Ford Mustang convertible. This set does not come with the door glass trim so save yours for reuse. There are three versions of this glass. The clear version is just that, clear with no tint. There is a tinted version that will have a slight green tint to the glass. There is also a second tinted version that is called smoked and this version has a grey / brown tint to the glass. The clear and the tinted versions are...

Reproduction tinted four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with manually operated windows. This set does not include any window trim so save your for reuse. There are three versions of this glass. The clear version is just that

Reproduction tinted four piece glass set for the Mercury Cougar or Ford Mustang convertible equipped with power windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

Complete five piece window glass set for the 1971

Reproduction six piece SUN-X or tinted glass set for the Mercury Cougar coupe equipped with or without power windows. This set does not come with any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

Complete five piece window glass set for the 1971

Reproduction seven piece tint glass set for the Mercury Cougar. This set does not come with any window trim so save your for reuse. There are three versions of this glass. The clear version is just that

Reproduction six piece tinted glass set for the Mercury Cougar. This set does not come with any window trim so save your for reuse. There are three versions of this glass. The clear version is just that

Reproduction TINTED five piece glass set for the Mercury Cougar coupe equipped with either power windows or crank windows. This set does not include any of the window trim so save yours for reuse. There are three versions of this glass. The clear version is just that

This reproduction tape is a must for anyone replacing their stainless steel window trim pieces on the 1967 - 1968 Cougar or Mustang. Can be used on any of the side windows. We suggest saving the original quarter window rubber surround if possible, due to the curves, but this tape can be used there as well if needed. This glass setting tape is designed to look and perform similarly to the original Ford factory material. It creates a water tight bond as well as...

1967-1973 14 amp Buss style glass tube fuses sold in a package of 5 and used in multiple positions. They are used for courtesy, instrument cluster, door, map, glove box, pillar, luggage compartment, and clock lamps. Also for the lighter, ignition key on and head lamp on buzzers.

1967-1968 15 amp Buss style glass tube fuses sold in a package of 5 and used for the turn signals. This fuse is not located in the fuse box, but rather in an in-line fuse holder coming off of the turn signal switch on the steering column about 2.5 inches down after the plug.

1969-1973 20 amp Buss style glass tube fuses sold in a package of 5 and used in multiple positions. They are used for accessory feed, seat belt warning, tilt swing column, speed control, door ajar, low fuel, and power window relay.

1969-1970 30 amp Buss style glass tube fuses sold in a package of 5 and used for air conditioning.

1967-1970 7.5 amp Buss style glass tube fuses sold in a package of 5 and used for courtesy, glove box, luggage compartment, clock, tachometer, and radio pilot lights. Fuse length 7/8"

Reproduction glove box cable. Keep in mind that the screws included in this kit are not correct. The original screws had a shoulder near the top to allow the cable to swing freely. You can find them here.Replaces Ford part #: C9ZZ-6506008.

Used glove box cable. Cable only, screws sold separately. The original screws had a shoulder near the top to allow the cable to swing freely. You can find them here. and we have original used.Replaces Ford part #: C9ZZ-65060A08.

Early 1967 style glove box catch. Fits all 1967-68 Cougars and 1966-68 Mustangs.Replaces Ford part number C6OZ-6206064-A.

Used glove box catch for any 1969-73 Mercury Cougar or Ford Mustang. Ford part number C9AZ-6206064-A.

Fits 1967 and 1968 Standard or XR7

Sold individually, two required per car. Replaces Ford Part #: 375838

Reproduction glove box latch for the 69 - 70 Cougar or Mustang. Unlike the originals, this is a keyless latch.

Used glove compartment lock latch without a key. Fits many Ford cars 1969-73 including Mercury Cougar and Ford Mustang. Mustangs normally did not have lockable glove boxes, but this will still work. These are stamped with a key code, and a key could be cut if you wanted a working lock. See related items for matching trunk and glove box locks with key. Part of the Ford part number 22050 keyed lock sets. No hardware or fasteners included.

Fits 1967 and 1968 Standard or XR7

Fits either 1967 or 1968 Mercury Cougar or Ford Mustang. Technically this is a copy of the 1967 factory installed version. 1968 factory glove box liners have a smooth section for installing the tire pressure decal. See the related items for 1967 and 1968 good used liners. Replaces Ford part #: C7ZZ-6506010-A.

Used glove box liner or plastic box for any 1967 Mercury Cougar or Ford Mustang. This is the same as the Scott Drake reproduction, but it lacks the smooth section for the tire pressure decal which was introduced on the 1968 cars. Used part with no cracks or heavy scratches. Inside clip usually has light rust. 1967 and 1968 glove box liners fully interchange, Replaces Ford part number C7ZB-6506010-A.

Used glove box liner or plastic box for any 1968 Mercury Cougar or Ford Mustang these do have the flat smooth area for installing the tire pressure decal. This is nearly the same as the 1967 used and Scott Drake reproduction, which lack the smooth section for the tire pressure decal. Good used part with no cracks or heavy scratches. Inside clip usually has light rust. 1967 and 1968 glove box liners fully interchange.Replaces Ford part number C8ZB-6506010-A.

Reproduction Glovebox Liner w/ Air for the 1971 - 1973 Mercury Cougar and Ford Mustang

Correct for Mercury Cougars and Ford Mustangs with air conditioning. This is a lower profile design to clear your factory installed in-dash A/C system. Replaces Ford part number C9ZB-6506010.Reference from mercurycougar.net: "Best guys to always talk to about Cougars..will take the time on the phone with you, call you back if you leave a message, got all the time in the world for you when your talkin 'cause your important to them. Greatest thing for our hobby. Thanks Lin and Don for...

Correct reproduction for 1969 and 1970 Mustang and Cougar with factory Air Conditioning. This has the smaller sized storage compartment compared to the non air conditioning version. Replaces Ford part number C9ZB-6506015.

Correct reproduction for the Mustang and Cougar without factory Air Conditioning. This has the larger sized storage compartment compared to the A/C version. However, we recommend going with our good used Glove Box Liner as it will be a better fit.

Correct for Mustang and Cougar without factory Air Conditioning. This has the larger sized storage compartment compared to the air conditioning version. Replaces Ford part number C9ZB-6506015.*Note - This box will not work with cars that have original air conditioning.