Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Because of extreme wildfire conditions, we are under LIMITED Staff and LIMITED Hours Restrictions.
Orders may be delayed.
We now require a $25 $5* minimum website order (Read More)
loading . . .
'https://storeimages-westcoastclassic.netdna-ssl.com/dc/26468/1409954659_z.jpg'

Item #: 26468

Login to add this item
to a saved wishlist
MSRP:$19.99
You Save: $2.14 (10.7%)
Price: $17.85
    Cost: 1428
    Earns: 18
    Bonus: 0

    Availability:

    Normal Stock Item - Next Business Day
    This decal was used on the Standard model Mercury Cougar for 1968 and both the XR7 and Standard model Mercury Cougar for 1967. Will require slight trimming for perfect fit. If you place a piece of 80 grit sand paper (or file/emery board) on a firm surface you will be able to bring the height of the decal down with just a few strokes of both the upper and lower edge. Dear Lin Thurston, Hi, just wanted to let you know how impressed I am, to receive a package ordered on 6-6-07 and have it arrive on 6-13-07 all the way up here in Ontario Canada. That is impressive! Your shipping department is to be commended. I must say that the mail service worked at part of it, but the speed at which your firm addresses online orders from outside your country will keep me coming back for other items! Thank you, Phil Nutis Frankford, Ontario Canada

    Check out our video below showing how to easily remove and reinstall your 67-68 trunk latch, lock, and cover plate, and some info on getting a new key made.

    Specifications:
    Shipping Weight: 0.01 LBS
    (weight shown may be the dimensional weight)
    (4.74 out of 5 stars) Customer Rating based upon 17 Review(s).
    Illinois

    Really Nice Emblem - Takes Some Filing

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.75 out of 5
    Pros:
    • Looks Good
    Cons:
    • Fit
    I had to take quite a bit of material off of the emblem to get it to fit, but I would rather have to take material off than not having enough there. It is a very nice looking emblem.

    Looks great

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.75 out of 5
    Pros:
    Cons:
    Had to spend a little time with a sanding block to fit. Easy install overall. Much improved the bleached original.

    Corryton, Tn.

    Trunk Lock Plate Cover Emblem

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.00 out of 5
    Pros:
    • Appears to look correct.
    Cons:
    • Not correct fit
    This is a great reproduction and is very easy and straight forward to install. The only issue is that its a bit too large and you'll need a file to carefully take the edges down to fit properly. Don't get in a hurry, just take your time as its a very thin piece of metal and will bend easily.

    Looks great

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    Cons:
    This sticker is a nice reproduction. It's not exactly perfectly shaped the same as the lock cover, which wouldn't matter except that it makes it a little bit hard to get perfectly straight.

    Uk

    Boot badge

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    Cons:
    Badge looks very nice, it will finish the boot of when I install it, shame it hasn't got something to protect it from weather and scratches, like a gel finish on top, or a thin Perspex cover to stick over the top, a bit difficult with the depth of the recess, but still a nice badge...

    Number of questions: 0
    Please login to ask a question.
    This decal was used on the Standard model Mercury Cougar for 1968 and both the XR7 and Standard model Mercury Cougar for 1967. Will require slight trimming for perfect fit. If you place a piece of 80 grit sand paper (or file/emery board) on a firm surface you will be able to bring the height of the decal down with just a few strokes of both the upper and lower edge. Dear Lin Thurston, Hi, just wanted to let you know how impressed I am, to receive a package ordered on 6-6-07 and have it arrive on 6-13-07 all the way up here in Ontario Canada. That is impressive! Your shipping department is to be commended. I must say that the mail service worked at part of it, but the speed at which your firm addresses online orders from outside your country will keep me coming back for other items! Thank you, Phil Nutis Frankford, Ontario Canada

    Check out our video below showing how to easily remove and reinstall your 67-68 trunk latch, lock, and cover plate, and some info on getting a new key made.

    Specifications:
    Shipping Weight: 0.01 LBS
    (weight shown may be the dimensional weight)
    (4.74 out of 5 stars) Customer Rating based upon 17 Review(s).
    Illinois

    Really Nice Emblem - Takes Some Filing

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.75 out of 5
    Pros:
    • Looks Good
    Cons:
    • Fit
    I had to take quite a bit of material off of the emblem to get it to fit, but I would rather have to take material off than not having enough there. It is a very nice looking emblem.

    Looks great

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.75 out of 5
    Pros:
    Cons:
    Had to spend a little time with a sanding block to fit. Easy install overall. Much improved the bleached original.

    Corryton, Tn.

    Trunk Lock Plate Cover Emblem

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.00 out of 5
    Pros:
    • Appears to look correct.
    Cons:
    • Not correct fit
    This is a great reproduction and is very easy and straight forward to install. The only issue is that its a bit too large and you'll need a file to carefully take the edges down to fit properly. Don't get in a hurry, just take your time as its a very thin piece of metal and will bend easily.

    Looks great

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    Cons:
    This sticker is a nice reproduction. It's not exactly perfectly shaped the same as the lock cover, which wouldn't matter except that it makes it a little bit hard to get perfectly straight.

    Uk

    Boot badge

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    Cons:
    Badge looks very nice, it will finish the boot of when I install it, shame it hasn't got something to protect it from weather and scratches, like a gel finish on top, or a thin Perspex cover to stick over the top, a bit difficult with the depth of the recess, but still a nice badge...

    Number of questions: 0
    Please login to ask a question.
    For your convinence, you can view this page on our old site by the following link:
    View Page On Old Site.