Exterior Trim

Because these pieces are restored original pieces, they will have far superior fit and finish when compared to "offshore" reproductions. This package is also an excellent option for you Mustang owners as well. Ford part number C9ZZ-6503137-A. *NOTE* If you have questions about your cores, checkout our video below. ...

Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Restored passenger side (right hand) vertical windhield moulding / trim for the Mercury Cougar. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. When you purchase one of our stainless trim parts you are paying for the removal of dings and scrapes as well as the polishing of the part.  Ford part # C9ZZ-7603144-B....

Restored passenger side (right hand) vertical windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. Because this windshield moulding / trim is a restored original piece, it will have far superior fit and finish when compared to "offshore" reproductions that do not fit correctly. They are also an excellent option for you Mustang owners as well. Ford part number C9ZZ-6503136-A. *NOTE* If you have questions about your cores, check out our video below. ...

Because these upper windshield mouldings are restored original pieces, they will have far superior fit and finish when compared to "offshore" reproductions that do not fit correctly. This package is also an excellent option for you Mustang owners as well. Ford part number C9ZZ-6503144-A. *NOTE* If you have questions about your cores, check out our video below. ...

Clean cores are required for this service, cores that are turned in for this service that are kinked, heavily pitted or mouldings with several holes drilled into them are not worth restoring. That being said, often all of the gravel pitting usually found at the front cannot completely be removed as it would result in a product that will be too thin.

Restored stainless steel convertible top trim for the middle section of the exterior boot trim. This is a two piece set of trim, a right and left section, which slip fit together.  We only sell this item on an exchange basis only, you are required to pre-send your restorable cores to West Coast Classic Cougar. These restored pieces work with both the 1969-70 Standard model Cougar and Mustang boot mouldings (even the reproduction die cast chromed mouldings), and 1969-70 Mercury Cougar XR7...

This option REQUIRES sending your cores in advance. Used stainless steel convertible top trim for the middle section of the exterior boot trim. This is a two piece set of trim, a right and left section, which slip fit together. These pieces work with both the 1969-70 Standard model Cougar and Mustang boot mouldings (even the reproduction die cast chromed mouldings), and 1969-70 Mercury Cougar XR7 convertible top mouldings. Limited supply of used and restored available.Replaces Ford part...

Restored driver side (left hand) convertible top boot moulding / trim for the Mercury Cougar XR7 convertible. These are unique to the XR7 as the standard convertibles used the shorter version (same as Mustang) that ended at the quarter window. We require you send a restorable core in exchange in advance to get this pricing. If your part is missing the aluminum belt-line weatherstrip mount then the part you receive in exchange will also be missing it.Ford part # C9WB-76423A19-A. ...

Restored Passenger side (right hand) convertible top boot moulding / trim for the Mercury Cougar XR7 convertible. These are unique to the XR7 as the standard convertibles used the shorter version (same as Mustang) that ended at the quarter window. We require you send a restorable core in exchange in advance to get this pricing. If your part is missing the aluminum belt-line weatherstrip mount then the part you receive in exchange will also be missing it. Casting # C9WB-76423A18-B. ...

This is a freshly rechromed / plated pair of used xr7 convertible boot trim mouldings.  Prior to being restored these parts were good used parts, not heavily pitted parts. Keep in mind the price shown here goes down substantially if you have one or more extra (in addition to the complete set from your car) good quality cores to trade in. If you have xr7 cores to sell lets us know! The casting numbers as seen on the bottom of these boot moulding, hockey stick shaped trim is C9WB-76423A18-B...

Used driver side (right hand) convertible top boot moulding / trim for the Mercury Cougar or Ford Mustang convertible. No cracks or missing studs, driver quality chrome. We also have some that need re-chrome as well as some singles, please call for details. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores.*NOTE* If you have questions about your cores, checkout our video below. ...

Used passenger side (right hand) convertible top boot moulding / trim for the Mercury Cougar or Ford Mustang convertible. No cracks or missing studs, driver quality chrome. We also have some that need re-chrome as well as some singles, please call for details. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores.*NOTE* If you have questions about your cores, checkout our video below. ...

This stainless steel driver side top of the door moulding or upper horizontal door trim was used for 69 - 70 Mercury Cougar XR7 models, including convertible, but is a nice upgrade for a standard Cougar. At this time, it is best to send in your "A" grade cores and have your own moulding / trim pieces restored. Our supply of "A" grade used moulding / trim is very low. After 30 days, core refunds will be given as in store credit that is equal to the core charge amount. Ford part #...

This stainless steel driver side top of the door moulding or upper horizontal door trim was used for 69 - 70 Mercury Cougar XR7 models, including convertible, but is a nice upgrade for a standard Cougar. This is a used part, often times it will have small or very minor dents. These stainless steel pieces shine up nicely with 0000 steel wool. Ford part number C9WY-6520935-A. *NOTE* The use of this XR7 unique trim requires the use of different belt-line weather strips than that of the standard,...

This stainless steel passenger side top of the door moulding or upper horizontal door trim was used for 69 - 70 Mercury Cougar XR7 models, including convertible, but is a nice upgrade for a standard Cougar. At this time, it is best to send in your "A" grade cores and have your own moulding / trim pieces restored. Our supply of "A" grade used moulding / trim is very low. After 30 days, core refunds will be given as in store credit that is equal to the core charge amount. Ford part #...

This stainless steel passenger side top of the door moulding or upper horizontal door trim was used for 69 - 70 Mercury Cougar XR7 models, including convertible, but is a nice upgrade for a standard Cougar. This is a used part, often times it will have small or very minor dents. These stainless steel pieces shine up nicely with 0000 steel wool. Ford part number C9WY-6520934-A. *NOTE* The use of this XR7 unique trim requires the use of different belt-line weather strips than that of the...

These are reproduction driver side (left hand) and passenger side (right hand) drip rail mouldings / trim for the Mercury Cougar equipped with a vinyl top. The vinyl top cars have a wider top edge but a narrow bottom edge. The non vinyl cars have a narrow top edge with a wide bottom edge. We will give credit for your original restorable cores. Replaces Ford part # driver side C9WY-6551726-D, passenger side C9WY-6551727-D.

These restored driver side (left hand) and passenger side (right hand) drip rail mouldings / trim for the Mercury Cougar equipped with a vinyl top have had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. These are sold outright, as a pair, or one side only. This is for the person that is striving for perfection with his show car. Most people are going to be...

Good used driver side (left hand) moulding / trim for the Mercury Cougar equipped with a vinyl top with no dents or deep scrapes ready to install on your driver / occasional show car. Expect one or two very small dings and some scratching on the underside where glue in glass has come undone at some point. The vinyl top cars have a wider top edge but a narrow bottom edge where the non vinyl cars have a narrow top edge with a wide bottom edge. However, both cars can use the same piece.Ford part...

Good used driver side (left hand) moulding / trim with no dents or deep scrapes ready to install on your driver / occasional show car. Expect one or two very small dings and some scratching on the underside where glue in glass has come undone at some point. The vinyl top cars have a wider top edge but a narrow bottom edge where the non vinyl cars have a narrow top edge with a wide bottom edge. However, both cars can use the same piece.Ford part # C9WY-6551726-C.*NOTE* If you have questions...

This restored driver side (left hand) drip rail moulding / trim has had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. These are sold outright, as one side only, or as a pair. This is for the person that is striving for perfection with his show car. Most people are going to be satisfied with our grade "A" good used drip rail mouldings / trim. The vinyl top cars...

Good used driver side (left hand) moulding / trim with no dents or deep scrapes ready to install on your driver / occasional show car. Expect one or two very small dings and some scratching on the underside where glue in glass has come undone at some point. The vinyl top cars have a wider top edge but a narrow bottom edge where the non vinyl cars have a narrow top edge with a wide bottom edge. However, both cars can use the same piece.Ford part # C9WY-6551726-C.*NOTE* If you have questions...

Good used passenger side (right hand) moulding / trim for the Mercury Cougar that was NOT equipped with a vinyl top. These units will not have dents or deep scrapes and will be ready to install on your driver / occasional show car. Expect one or two very small dings and some scratching on the underside where glue in glass has come undone at some point. The vinyl top cars have a wider top edge but a narrow bottom edge where the non vinyl cars have a narrow top edge with a wide bottom edge....

Good used passenger side (right hand) moulding / trim for the Mercury Cougar that was NOT equipped with a vinyl top. These units will not have dents or deep scrapes and will be ready to install on your driver / occasional show car. Expect one or two very small dings and some scratching on the underside where glue in glass has come undone at some point. The vinyl top cars have a wider top edge but a narrow bottom edge where the non vinyl cars have a narrow top edge with a wide bottom edge....

We do what we have dubbed as "core matching". The better quality cores you send us, the better product you will get in exchange. If you would prefer your original cores be restored just mention it in a note when you send in payment with your restorable parts. It is also a good idea to scratch your initials on the back side. New eyebrow attaching clips with nuts available here.  

NOS passenger side (right hand) fender extension moulding / trim for the Mercury Cougar including XR7 and Eliminator. This unit is missing its wrapper and does show some shelf wear as do most delicate NOS trim parts.Ford part # C9WY-16074-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon...

Used exterior driver side (left hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. With a bit of elbow grease and time, you can make those trim pieces look better than new! Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the bottom...

Used exterior passenger side (right hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. With a bit of elbow grease and time, you can make those trim pieces look better than new! Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the...

This is a good used core piece of trim that is ready to be restored or bolted onto that less than perfect driver.

We do what we have dubbed as "core matching". The better quality cores you send us, the better product you will get in exchange. If you would prefer your original cores be restored just mention it in a note when you send in payment with your restorable parts. It is also a good idea to scratch your initials on the back side. New hood trim attaching clips with nuts available here.    Fits: 1970 Mercury Cougar ...

Good used condition with the kind of patina you would expect from a car with about 100k miles. Great for that well kept driver that is not quite ready for a restoration.New hood trim attaching clips with nuts available here.    Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

Good used core trim part that is ready for restoration.

Nice used piece with no salt corrosion or serious damage. Ready to fasten to your driver!New hood trim attaching clips with nuts available here.   Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. 

This is the trim piece that goes along the front edge of the hood. Ford Part #: C9WY-16856-A Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Keep in mind we pay well for quality 69 hood lip mouldings. Fits: 1969 Mercury Cougar (Standard, XR7 and Eliminator) *Tip* Even if your restored trim part(s) were never dented they still will have about 10-15% thinner material on the face after restoration and of course more if there were...

Correctly restored, anodized aluminum trim. Requires painting in the recessed areas. New hood trim attaching clips with nuts available here.   Fits: 1970 Mercury Cougar

Used driver side (left hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small...

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference in the contour on the ends of this piece that differentiates driver and passenger side. These will not work on a 1970 as the rear wheel opening was increased in size for the 1970 model year. These 1969 mouldings are about 79-1/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small dings and scrapes....

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple...

Reproduction driver side (left hand) quarter window moulding / trim for the Mercury Cougar. This unit also comes with a used aluminum mounting bracket. Some refer to this unit as a "Hockey Stick" or "J moulding" and it mounts at the base of the rear quarter windows. These mouldings almost always need to be replaced due to pitting or having holes drilled in them to fasten them in place. We have found that this 3M product works great for bonding these mouldings / trim to the mounting bracket...

Reproduction passenger side (right hand) quarter window moulding / trim for the Mercury Cougar. This unit also comes with a used aluminum mounting bracket. Some refer to this unit as a "Hockey Stick" or "J moulding" and it mounts at the base of the rear quarter windows. These mouldings almost always need to be replaced due to pitting or having holes drilled in them to fasten them in place. We have found that this 3M product works great for bonding these mouldings / trim to the mounting bracket...

This obscure little part fills the gap on the underside of the roof rail where the rear 1/4 window meets the "C" pillar. Also known as "Roof Side Cover Retainer"

1969 - 1970 Cougars came factory equipped with stainless trunk mouldings and 1967 - 1968 Cougars came equipped with anodized aluminum trunk lid mouldings. However if you ordered a 67-68 service replacement deck moulding from Ford anytime after 1968 you would have received a stainless steel replacement. We recently obtained 15 of these that were stored improperly where the packaging had deteriorated and the mouldings showed shelf wear. We sent them out to be polished and the results are...

This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the aluminum corner mouldings perfectly. Seven clips are...

This option REQUIRES sending your core in advance. This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the...

Used stainless steel deck or trunk moulding / trim for 1969-70 Mercury Cougar, including convertible. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the aluminum corner mouldings perfectly. This being a used, means that it will have minor scratches, and a small dent or two. Save your old mounting clips, these are sold without...

Used driver side (left hand) lower rear window moulding / trim for the Mercury Cougar.

Core stainless steel mouldings will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.