1967 - 1968

Restored aluminum rear deck lid moulding / trim for the Mercury Cougar. If you do not have cores that are worthy of restoration we do have them for sale. The better core you start out with, the better the end result will be! If you prefer a mirror like luster then I suggest you purchase the 1969-70 deck moulding as stainless offers a much brighter finish. Seven clips are used to install the deck lid moulding and we have new clips available here. We will accept extra cores in on exchange for...

1969 - 1970 Cougars came factory equipped with stainless trunk mouldings and 1967 - 1968 Cougars came equipped with anodized aluminum trunk lid mouldings. However if you ordered a 67-68 service replacement deck moulding from Ford anytime after 1968 you would have received a stainless steel replacement. We recently obtained 15 of these that were stored improperly where the packaging had deteriorated and the mouldings showed shelf wear. We sent them out to be polished and the results are...

This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the aluminum corner mouldings perfectly. Seven clips are...

This option REQUIRES sending your core in advance. This is a freshly restored 1969-70 original stainless steel deck lid moulding. It has had all minor dings and creases it may of had professionally removed and has been polished to a mirror like, better than N.O.S. finish. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the...

Used stainless steel deck or trunk moulding / trim for 1969-70 Mercury Cougar, including convertible. This will also fit perfectly on your 1967-68 in place of the original aluminum trim and will look brighter and be less prone to damage. The down side to installing this on your 1967-68 Cougar is that it will not match the aluminum corner mouldings perfectly. This being a used, means that it will have minor scratches, and a small dent or two. Save your old mounting clips, these are sold without...

Restored driver side (left hand) lower rear window moulding / trim for the Mercury Cougar. This is the same part as the 1969-70 piece, however those pieces will carry a part number beginning in C9WY.Ford part # C7WY-42405-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim...

Used driver side (left hand) lower rear window moulding / trim for the Mercury Cougar. This is the same piece as the 1969-70 piece, however those pieces carry a part number beginning in C9WY. Ford part # C7WY-42405-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section. Also,...

Restored driver side (left hand) upper rear window moulding for your Mercury Cougar. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY.Ford part # C7WY-42431-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section. Also, keep...

Restored passenger side (right hand) lower rear window moulding / trim for your Mercury Cougar. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY.Ford part # C7WY-42404-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section....

Restored passenger side (right hand) upper rear window moulding / trim for the Mercury Cougar. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY.Ford part # C7WY-42430-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section....

Used passenger side (right hand) upper rear window moulding / trim for your Mercury Cougar. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY.Ford part # C7WY-42430-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section....

Used drive side (left hand) upper rear window moulding / trim for the Mercury Cougar. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY.Ford part # C7WY-42431-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section. Also, keep...

Unlike our reproduction rocker mouldings, we can sell these used mouldings individually (shipping is the same price when you buy one or several). Even though there is no difference in fit or part number, we do ask that you choose passenger side or drivers side by mentioning it in the notes as the finish is always duller on the front end, behind the front tires from road debris. The majority of our used 1968 rocker moldings have one screw hole towards the front. Reason being is that there were...

Used driver side upper quarter window channel for all 1967-68 Mercury Cougars. This is the stainless steel upper glass frame section only. Our used trim will have some fine scratches or scuffing present. Driver side only, passenger side also available. Restored also available. Replaces Ford part number C7WY-6529963-A.Check out our video below for helpful tips on disassembling your vent and quarter windows: ...

Used passenger side upper quarter window channel for all 1967-68 Mercury Cougars. This is the stainless steel upper glass frame section only. Our used trim will have some fine scratches or scuffing present. Passenger side only, driver side also available. Restored also avialable. Replaces Ford part number C7WY-6529962-A.Check out our video below for helpful tips on disassembling your vent and quarter windows: ...

Restored trim piece for 67 - 68 Cougars. This is the trim that goes around your driver side quarter window. And since it has been restored, it will be polished to a much higher luster than what the factory would have done.Check out our video below for helpful tips on disassembling your vent and quarter windows: ...

Restored trim piece for 67 - 68 Cougars. This is the trim that goes around your passenger side quarter window. And since it has been restored, it will be polished to a much higher luster than what the factory would have done.Check out our video below for helpful tips on disassembling your vent and quarter windows: ...

Used driver side (left hand) rear vinyl top moulding / trim for your Mercury Cougar. Speed nut fasteners are sold separately. This trim requires 4 speed nuts for attaching.Ford part # C7WY-65423A21-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar

Used driver side (left hand) vinyl top moulding / trim for your Mercury Cougar. We have not had any of these drivers side mouldings / trim to sell single in at least 15 years... When folks remove these with a pry bar they always seem to start with the drivers side before they realize the error of their ways. If you have a few drivers side moulding / trim you would like to sell we would love to hear from you! Speed nut fasteners are sold separately. This piece of trim needs 4 speed nuts.Ford...

Used passenger side (right hand) rear vinyl top moulding / trim for your Mercury Cougar. Good used moulding with no broken studs or heavy scratches. Fasteners sold separate. Speed nuts sold separately, this trim item requires a total of 5 speed nuts.Ford part # C7WY-65423A20-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar ...

Used passenger side (right hand) vinyl top moulding / trim for your Mercury Cougar. Good used part with no heavy scratches or broken studs. Speed nut fasteners are sold separately. This trim requires a total of 4 speed nuts.Ford part # C7WY-65423A18-A.Fits: 1967 Mercury Cougar1968 Mercury Cougar

Core driver side (left hand) front wheel lip moulding / trim for your Mercury Cougar.Ford part # C7WY-16039-A.

NOS driver side (left hand) front wheel lip moulding / trim for your Mercury Cougar.Ford part # C7WY-16039-A.

Good used wheel lip moulding with no corrosion, obvious scratches or dents. This moulding will still have a good shine but do not expect NOS quality from a used piece of aluminum such as this one. If you are sending us a core in exchange please do not send twisted, ripped, corroded parts for an exchange. Dull, slightly dented, warped or scratched (not gouged) trim parts are OK as cores. If you are in question as to whether your core is worthy of restoration or not please send us a digital...

Driver side rear wheel lip moulding. This piece is suitable for restoration or could fit right in with a lower quality daily driver.

Driver side rear wheel lip moulding. Fits any 1967-68 Mercury Cougar except GT-E models.Replaces Ford part number C7WY-6529165-A.

*Note - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC. Why do we require cores be sent for a used piece of trim?We pull the best of our used cores and make them available for those who do not want or need a restored piece of trim, but in order to keep a viable supply of cores to send in to be refurbished we need a restorable core in exchange. If you do not have a core, or wish to send in your core at a later date, we have...

Core wheel lip mouldings are good for restoration or for a shabby looking driver. They will not be flattened out, ripped, kinked or have salt corrosion.

*NOTE* - This is a core exchange item only, trim will not ship until your acceptable trunk moulding core is received by WCCC. Why do we require cores be sent for a used piece of trim?We pull the best of our used cores and make them available for those who do not want or need a restored piece of trim, but in order to keep a viable supply of cores to send in to be refurbished we need a restorable core in exchange. If you do not have a core, or wish to send in your core at a later date, we have...

Why is this right rear wheel lip so costly and difficult to find these days? Consider this... The right rear was the first to go obsolete from Ford. The right rear is the one most likely to get damaged because of it being the corner that is in the "blind spot". Remember, these early Cougars did not have RH mirrors! Lastly and maybe the most relevant is the fact that the right rear wheel is your traction tire which means more damage from flying road debris, loose tire chains and the like. It...

Why is this right rear wheel lip so costly and difficult to find these days? Consider this... The right rear was the first to go obsolete from Ford. The right rear is the one most likely to get damaged because of it being the corner that is in the "blind spot". Remember, these early Cougars did not have RH mirrors! Lastly and maybe the most relevant is the fact that the right rear wheel is your traction tire which means more damage from flying road debris, loose tire chains and the like. It...

*NOTE* - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC. Why do we require cores be sent for a used piece of trim?We pull the best of our used cores and make them available for those who do not want or need a restored piece of trim, but in order to keep a viable supply of cores to send in to be refurbished we need a restorable core in exchange. If you do not have a core, or wish to send in your core at a later date, we have cores...

Restored drive side upper windshield moulding, fits all 1967-68 Mercury Cougar and 1965-68 Ford Mustang coupes.Ford part number C5ZZ-6503145-B.

The trim at the top of the windshield on the left hand side.Ford part number C5ZZ-6503145-B

NOS driver side (left hand) vertical windshield moulding / trim for the Mercury Cougar or Ford Mustang. Ford part # C5ZZ-6503137-B.

Your original decades old trim will look fine... Until you place it next to a quality paint job.Ford part number C5ZZ-6503137-B.

Used driver side (left hand) vertical windshield moulding / trim for the Mercury Cougar or Ford Mustang. These are suitable for restoration and for use your daily driver.Ford part # C5ZZ-6503137-B.

This restored OEM stainless steel lower windshield moulding / trim has been restored to a level far beyond NOS. It has been polished to a mirror like finish that is brilliant and gleaming. The term "over restored" could be applied to this part because back in the day FORD never spent the time we invested into polishing this piece. Original parts like this one always fit and look superior to "offshore" reproductions.Ford part # C5ZZ-6503148-B.

This good used original lower windshield moulding / trim has been carefully inspected to be free of small dings and heavy scratches. It will have very light scratches consistent with a classic of this age but nothing a do it yourself type could not bring to show quality on his own. This trim piece is perfect for someone wanting a trim part ready to install on their very nice driver or occasional show car. Much better fit than "offshore" reproductions. Ford part # C5ZZ-6503148-B. *NOTE* Keep in...

NOS passenger side (right hand) upper windshield moulding / trim for your Mercury Cougar or Ford Mustang. Ford part # C5ZZ-6503144-B. 

Restored passenger side (right had) upper windshield moulding / trim for your Mercury Cougar or Ford Mustang. This piece will look right at home gleaming in the sun on your mint condition Cat or Pony and will definitely make your ride POP!Ford part # C5ZZ-6503144-B.

Used passenger side (right hand) upper windshield moulding / trim for your Mercury Cougar or Ford Mustang. This piece is suitable for your lower quality daily driver or a great piece for a high quality restoration.Ford part # C5ZZ-6503144-B. 

Restored passenger side (right hand) vertical windshield moulding / trim for your Mercury Cougar or Ford Mustang. This piece is considered over restored because of the high luster and will make your Cat or Pony absolutely POP!Ford part # C5ZZ-6503136-B.

Used passenger side (right hand) vertical windshield moulding / trim for your Mercury Cougar or Ford Mustang. This piece will fit right in on your daily driver or is an excellent candidate for those of who like to restore your own parts.Ford part # C5ZZ-6503136-B.

This pair of restored drip rail mouldings / trim will have had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. Our mouldings / trim are sold outright, as a pair, or one side only. Most people will be satisfied with our used grade "A" drip rail mouldings / trim, however these are for the person that is striving for perfection with his or her show car. Ford part #...

Core anodized aluminum front moulding / trim set for the Mercury Cougar. This is a six piece core set of front mouldings with minor dings and scratches. Good for a poor quality driver or for restoration.  Parts will have no holes, cracks, or heavy pitting.  If you are wanting our six piece restored set and do not have a set to exchange, this listing is what you will need to purchase in conjunction with the restored set.

Restored six piece anodized aluminum front moulding / trim set for the Mercury Cougar. We suggest you make the order online and then send your cores with a copy of your invoice. Once your cores arrive we will ship the restored set.  If you do not have good cores we do have them for sale. These restored original trim parts have the correct satin "bright dip" anodized finish and look like NOS! We have sold hundreds of these trim parts to Cougar owners all over the world, many of which are...

Restored six piece anodized aluminum front moulding / trim set for the Mercury Cougar. We suggest you make the order online and then send your cores with a copy of your invoice. Once your cores arrive we will ship the restored set.  If you do not have good cores we do have them for sale. These restored original trim parts have the correct satin "bright dip" anodized finish and look like NOS! We have sold hundreds of these trim parts to Cougar owners all over the world, many of which are...