Contact Us / Visit Us (click here)
Due to a Global Cyber Issue some credit / debit cards are not able to be processed at this time.
International Customers Click Here [Updated 6/2024]
Loading Trivia . . .
'https://cdn.cougparts.com/dc/26625/1467246360_f.jpg','https://cdn.cougparts.com/dc/26625/1467246361_k.jpg'
  • Side Marker / Rear Reflector - Assembly to Body - Pads - PAIR - Repro ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego - 26625
  • Side Marker / Rear Reflector - Assembly to Body - Pads - PAIR - Repro ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego - 26625

Item #: 26625

Login to add this item
to a saved wishlist
Price: $11.85
    Cost: 948
    Earns: 48
    Bonus: 0

    Availability

    In-Stock Item - Next Business Day

    Applications

    Description

    These pads go between the rear quarter panel and quarter panel reflector on the 1968 Mercury Cougar only. Sold as a pair. 

    Replaces Ford part #: C8WY-13493.

    *Note - These were not installed on Ford Mustangs, but they could be installed since they use the same reflector after Feb 15, 1968.

    Specifications:
    Shipping Weight: 0.10 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    4.19 out of 5 stars
    Based upon 4 Review(s).
    5 Stars
    0%
    4 Stars
    25%
    3 Stars
    0%
    2 Stars
    0%
    1 Stars
    0%
    Pennsylvania
    2018

    Good fit

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Looks
    Cons:
    • Needed trimming
    These are decent rubber pads, and look pretty good.....I had to trim the edges a bit, and the size seemed off just a tiny bit (slightly over-sized top to bottom, width was perfect), but they do the job and look good on the car.

    Looks nice

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    The edges are not that good, but you can trim the rubber.
    In the end it is really good.

    SF Bay Area
    2013

    Nicely made

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Nice product I had to do a lil trimming of the edge. It's really neat when done right. I was about to use an old bike inner tube and trim it to fit. Glad I didn't.

    Baltimore
    2013

    4.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Loks like a well made product it is flexible and fits well

    Number of questions: 0
    Please login to ask a question.

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...
    - MartinD
    My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...
    - Frank
    Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...
    - Mike Dunlap
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)
    I6F07