International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Side Marker Light / Turn Signal - Front - Housing ONLY - Grade B - Used ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego

1968 Mercury Cougar

1 Review(s) 23

Item #: 20515

Price: $27.86

Cost: 2229

Earns: 112

Bonus: 23

Availability

Out of Stock - Unknown

Applications

1968 Mercury Cougar

Description

This grade "B" light bezel will have minor blemishes in the chrome as shown. Good part for a driver as it will not have deep pits. Does not include pigtail or lens. Left is the same as right. To remove pigtail from your existing light wrap socket in cloth to protect and grip firmly with a pair of pliers, rock back and forth while pulling and the plug and socket assembly should come right out from the back side.

Replaces Ford part # C8WY-15A201-C.

Specifications:

Shipping Weight: 2.00 LBS

(weight shown may be the dimensional weight)

1 Reviews (5.00 of 5 Rating)

5.00 out of 5 stars
Based upon 1 Review(s).

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

Nolen

9/19/2014

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Not a bad piece for a grade B part..

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 26651 [More info]
[More info] Side Marker Light - Lens to Housing - Gaskets - PAIR - Repro ~ 1968 Mercury Cougar / 1968 Mercury Cyclone / 1968 Mercury Montego
Sold as a pair. These gaskets seal the lens to the light housing on the 1968 side marker lights found on the fenders of the 1968 Cougar.

Buy

$4.25
Frequently
Purchased With

Item #: 26626 [More info]
[More info] Side Marker Lights - Assembly to Body - Gaskets - PAIR - Repro ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego
Replaces Ford part #C8WY-15447. Sold as a pair, two required per car. Right is the same as left.

Buy

$16.45
Frequently
Purchased With

Item #: 19267 [More info]
[More info] Side Marker Light / Turn Signal - Front - Backing Plate / Retainer - Used ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego
Coming from Western parts cars these brackets are unusually nice in comparison to what you will find in other regions. For and extra $1.50 we can include the mounting nuts. Right is the same as left, two brackets...

Buy

$6.89
Frequently
Purchased With

Item #: 27034 [More info]
[More info] Lens - Side Marker Light / Turn Signal - Front - Grade B - Used ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego
Good used lens with average wear and may have some cracking and hazing. Right is the same as left, two required per car. No hardware included.

Buy

$35.87
Frequently
Purchased With

Item #: 26625 [More info]
[More info] Side Marker / Rear Reflector - Assembly to Body - Pads - PAIR - Repro ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego
These pads go between the rear quarter panel and quarter panel reflector on the 1968 Mercury Cougar only. Sold as a pair. Replaces Ford part #: C8WY-13493.*Note - These were not installed on Ford Mustangs,...

Buy

$11.85
Frequently
Purchased With

Item #: 30421 [More info]
[More info] Splash Shields - Front Fender To Bumper - PAIR - Repro ~ 1967 - 1968 Mercury Cougar
Exact reproduction of originals but improved!On the originals, the mounting holes did not line up properly so we made them fit perfect!Made using the original Ford blue prints and a NOS original for the pattern....

Buy

$68.25
Frequently
Purchased With

Item #: 10907 [More info]
[More info] Seals - Fender / Quarter Extension - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Premium reproduction rubber seal with the proper thickness of the 1967-68 seal as found on Mercury Cougar and Ford Mustang except these are not molded to the extension contours. Starting in 1969 this channel seal...

Buy

$2.75
Frequently
Purchased With

Item #: 24470 [More info]
[More info] Side Marker Light / Turn Signal - Front - Wiring Harness - Used ~ 1968 Mercury Cougar
Ford never offered this socket / plug assembly on its own but we do from time to time get one that has a clean socket and no cuts in the wiring. You can often just twist and pull (after the bulb has been removed)...

Buy

$38.88
Frequently
Purchased With

Item #: 26643 [More info]
[More info] Back Up Light To Rear Valance Seals / Original Gray - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
These Back Up Light To Rear Valance Seals are Sold as a pair. Fits the 67 and the 68. Replaces Ford part #: C7ZZ-15533. Note, gray is in fact the correct color for these, Mustang used black in 67-68. Note we also...

Buy

$2.65
Frequently
Purchased With

Item #: 30497 [More info]
[More info] Bumpers - Fender to Hood - Set of 4 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Four per car, mounts to fenders. Replaces Ford part #: C7WY-16758.

Buy

$2.55
Frequently
Purchased With

Item #: 11288 [More info]
[More info] Side Marker / Rear Reflector Assembly - Economy - Repro ~ 1968 Mercury Cougar / 1968 Ford Cyclone / 1968 Mercury Montego
Nice reproduction rear body side reflector as found on 1968 Mercury Cougars. Used on Montego / Cyclone / Cougar for the 1968 model year. Great reproduction, but without the 'FoMoCo' marking like on our concours...

Buy

$69.15
Frequently
Purchased With

Item #: 26221 [More info]
[More info] Weatherstrip Seal - Rear Deck / Trunk Lid - Repro ~ 1967 - 1970 Mercury Cougar / 1965 - 1970 Ford Mustang
Reproduction rear deck / trunk lid weatherstrip seal for the Mercury Cougar or Ford Mustang. A cheap piece that will keep water out and keep your trunk from rusting. Replaces Ford part #: C5ZZ-6543720. While you're...

Buy

$13.65

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials