International Customers Click Here [Updated 1/2025]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

PCV - Fitting - Intake Manifold - Front 390 / 428CJ - Repro

Reproduction PCV Front Intake Fitting for the 1967, 1968 and 1969 Mercury Cougar or Ford Mustang

Item #: 41702

Buy

Price: $89.05
Online Only Price

Cost: 7124

Earns: 357

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

3 Cougar / 3 Mustang Applications

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang
1969 Ford Mustang

Description

Steel fitting for 390-4V / 427-4V and 428CJ engines with the PCV transfer tube.

Replaces C7AZ-9A474-A. Painted Ford Corporate Blue from the factory.

Specifications:

Shipping Weight: 0.70 LBS

(weight shown may be the dimensional weight)

Shipping Dimensions: Not Specified

Returning Cores

Front steel vacuum fitting for 390, 427, 428CJ engines.

Replaces Ford part number C7AZ-9A474-A.

0 Product Q&A

Number of questions: 0

Please login to ask a question.

0 Reviews (0.00 of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Click here to help us improve this product listing

Why am I being warned about potential exposure to chemicals in motor vehicle parts?

Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
This product is known to contain the following listed chemicals: None

Frequently purchased with:

Frequently
Purchased With

Item #: 41554 [More info]
[More info] PCV Intake Manifold Fitting - Rear - 390 GT / 428 CJ - Repro ~ 1967 - 1968 Mercury Cougar
1967 - 1968 Ford Mustang
This fitting screws into intake manifold, has 1/2" nipple for PCV hose, 3/16" vacuum port nipple and threaded hole for smaller accessory fitting. 5/8 by 20 thread pitch

Buy

$89.05
Online Only Price
Frequently
Purchased With

Item #: 13911 [More info]
[More info] Clamp - Breather Hose - EACH - Repro ~ 1967 - 1968 Mercury Cougar
1967 - 1968 Ford Mustang
Designed for any one-inch hose, this clamp can be used for a number of different applications including the breather hose between the valve cover and air cleaner on 1967, and 1968 Cougars.

Buy

$0.85
Online Only Price
Frequently
Purchased With

Item #: 10442 [More info]
[More info] PCV Valve - 390 / 427 / 428 - Repro ~ 1968 - 1969 Mercury Cougar
1968 - 1969 Ford Mustang
Reproduction positive crankcase ventilation valve or PCV valve for 1968 Mercury Cougar, Cyclone, Ford Mustang and Torino all with 390GT or S code 390-4V engines. Additionally this fits all 428 Cobra Jet and Super...

Buy

$61.45
Online Only Price
Frequently
Purchased With

Item #: 41893 [More info]
[More info] Hose - PCV to Transfer Tube - Big Block - Repro ~ 1967 - 1969 Mercury Cougar
1967 - 1969 Ford Mustang
Connects PCV valve to PCV transfer tube on the 390, 427-4V, and 428CJ. Inside diameter on one end is .45" the other end is .58". These should be tough to get on so that they will form a vacuum seal. Originally held...

Buy

$29.05
Online Only Price
Frequently
Purchased With

Item #: 26578 [More info]
[More info] PCV Grommet - Valve Cover - Repro ~ 1967 - 1973 Mercury Cougar
1967 - 1973 Ford Mustang
Replaces Ford part #C7AZ-6892. For round hole with two notches, aluminum or steel valve covers.

Buy

$4.15
Online Only Price
Frequently
Purchased With

Item #: 41699 [More info]
[More info] PCV Valve To Hose Adapter - Boss 302 / 390-4V / 428CJ - Repro ~ 1967 - 1970 Mercury Cougar
1967 - 1970 Ford Mustang
This adapter is threaded on bottom for Boss 302 / 390-4V / 428CJ PCV valve and 6 degree nipple on side. Gold Cadmium plated, not painted originally. This only works with the OEM or reproduction threaded PCV...

Buy

$51.82
Online Only Price
Frequently
Purchased With

Item #: 16208 [More info]
[More info] Vacuum Fitting - Brass - Intake Manifold - Used ~ 1968 - 1969 Mercury Cougar
1968 - 1969 Ford Mustang
Used brass fitting found on intake manifolds 1968-69 Mercury Cougar and Ford Mustang. Usually works with an adapter that screws into the rear of the intake manifold directly. With 3 vacuum ports for various...

Buy

$51.85
Online Only Price
Frequently
Purchased With

Item #: 15299 [More info]
[More info] PCV Transfer Tube - 390 GT - Repro ~ 1967 - 1968 Mercury Cougar
1967 - 1968 Ford Mustang
PCV TUBE, fits stock GT cast iron manifolds, replaces Ford part number C6AZ-6758-A. The main difference between the 390 tube and the 428 tube is the center fitting angle. The 390 tube has a little less pronounced...

Buy

$97.07
Online Only Price
Frequently
Purchased With

Item #: 41700 [More info]
[More info] PCV Transfer Tube - 427-4V / 428 PI- Repro ~ 1968 Mercury Cougar GT-E / 1967 - 1968 Ford Mustang Shelby GT500
100% Concours Correct PCV Tube for the 1968 Mercury Cougar 427 GT-E, Ford Mustang, Fairlane, or Torino with the 428 Police Interceptor, fits either # C6AE or # C7AE Aluminum PI intake manifold. Replaces Ford Part...

Buy

$95.55
Online Only Price
Frequently
Purchased With

Item #: 41701 [More info]
[More info] PCV Intake Manifold Fitting - Rear 390-4V / 427-4V / 428CJ - Repro ~ 1969 Mercury Cougar
1969 Ford Mustang
This fitting screws into intake manifold, has 1/2" nipple for PCV hose, 3/16" vacuum port nipple and threaded hole for smaller accessory fitting. Painted Ford Corporate blue from the factory.

Buy

$66.75
Online Only Price
Frequently
Purchased With

Item #: 41698 [More info]
[More info] PCV Transfer Tube - 428CJ / SCJ - Repro ~ 1968 - 1969 Mercury Cougar
1968 - 1969 Ford Mustang
PCV tube for the Mercury Cougar, Ford Mustang GT500KR and Torino with the 428 CobraJet and Super CobraJet for 1968-69 and C8OZ-9424-C factory iron intake manifold. The main difference between the 390 tube and the...

Buy

$95.55
Online Only Price
Frequently
Purchased With

Item #: 42055 [More info]
[More info] Spark Plug - Wire Separator - Valve Cover - BLACK - EACH - Repro ~ 1967 - 1972 Mercury Cougar
1967 - 1972 Ford Mustang
Keeps spark plug wires neat and orderly. Mounts on valve covers. Replaces Ford Part #: B8Q-12297-A.

Buy

$1.45
Online Only Price

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...