Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Fuel Line - Fuel Pump To Carburetor - 289 / 302 - 2V - Autolite 2100 - STAINLESS STEEL - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang

Reproduction Stainless Steel Fuel Pump To Carburetor Steel Tubing for the 1967 and 1968 Mercury Cougar with the 289 and the 2 or 4 Barrel Carburetor

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

1 Review(s) 0

Item #: 14029

Price: $40.65

Cost: 3252

Earns: 163

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

Description

This is the steel tube that goes from the carburetor to the fuel pump. Stainless Steel

Specifications:

Shipping Weight: 2.00 LBS

(weight shown may be the dimensional weight)

1 Reviews (1.00 of 5 Rating)

1.00 out of 5 stars
Based upon 1 Review(s).

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

100%

Write a review!

Mike

2018

3/7/2019

1.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Absolute trash. The only way this line compares to the original line that I took out of the car is that it is a tube and it has flared ends. I would have been better off buying straight line and bending it myself
WCCC Response: Hi Mike, Sorry to hear it did not fit well for you. Did the one you received look exactly like the one in the picture? We pulled one off the shelf and tried it on our own car here and it fit fine. We also compared it to the OE steel version and found it is bent exactly the same.

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 24972 [More info]
[More info] Fuel Line - Tank To Pump - Two Piece - 3/8 Inch Fittings - STAINLESS STEEL - Repro ~ 1967 LATE - 1968 Mercury Cougar
Reproduction stainless steel two piece fuel tank to pump fuel line with 3/8" fittings that runs down the rocker panel for the Mercury Cougar.If you decide to upgrade to larger lines, remember that you have to use...

Buy

$125.95
Frequently
Purchased With

Item #: 41051 [More info]
[More info] Fastener Kit - Brake / Fuel Line - Repro ~ 1968 Mercury Cougar / 1968 Ford Mustang V8 Only
This quality kit contains everything you need to replace the original hardware for fuel and brake lines on your 1968 Cougar or V8 Mustang. It even includes 3 new bolts for the metal protector plate for the fuel...

Buy

$44.85
Frequently
Purchased With

Item #: 11942 [More info]
[More info] Screw - Fuel Tank Installation Kit - Set of 12 - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Original style fuel tank installation screw kit. 3/8 inch hex head. This is a set of 12 new screws. Black phosphate finish on this reproduction, originals were plated. Fits all 1967-70 Mustang and Cougar fuel...

Buy

$7.85
Frequently
Purchased With

Item #: 41857 [More info]
[More info] Fuel Line - 3/8" - RUBBER - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Quality U.S.A. made hose with concours repeating GAS markings. Also include OEM mounting hardware. Replaces Ford Part #: C7ZZ-9327-A. Check out our video on replacing the fuel system on a '68 Cougar...

Buy

$20.91
Frequently
Purchased With

Item #: 10076 [More info]
[More info] Gasket - Filler Neck to Body - Repro ~ 1967 - 1968 Mercury Cougar
Made from fuel resistant cork like original. This gasket is specific to 1967 - 1968 Cougars. We finally found the correct gasket with correct hole placement (our other version which is good for Cougar AND Mustang...

Buy

$5.55
Frequently
Purchased With

Item #: 26659 [More info]
[More info] Hose - Fuel Filler Neck to Fuel Tank - ECONOMY - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
This Gas Tank To Filler Pipe Hose reproduction fits the 67, 68, 69, and 70 Mercury Cougar. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We...

Buy

$8.25
Frequently
Purchased With

Item #: 12439 [More info]
[More info] Fuel Pump - 289 / 302 / 351W - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction fuel pump for all 1967-70 Mercury Cougars and Ford Mustangs equipped with the 289, 302 or 351W engines. Be aware that this pump has a 3/8 inch fitting for the fuel line.

Buy

$56.42
Frequently
Purchased With

Item #: 26652 [More info]
[More info] Accelerator Pedal Rod To Firewall Grommet - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
This Accelerator Pedal Rod To Firewall Grommet reproduction fits both the 67 and the 68. Replaces Ford part # C6OZ-9793-A.

Buy

$1.55
Frequently
Purchased With

Item #: 26576 [More info]
[More info] Grommet - Fuel Line - 3/8 Inch - Fuel Line to Side Apron - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction 3/8" fuel line to side apron grommet for the Mercury Cougar or Ford Mustang.Replaces Ford part # C7ZZ-9288.

Buy

$2.35
Frequently
Purchased With

Item #: 26044 [More info]
[More info] Taillight Cover / Protectors - PAIR - Repro ~ 1967 - 1968 Mercury Cougar
This pair of sturdy cardboard taillight covers / protectors are designed to protect your taillight sockets from being dislodged or damaged. In addition to the protection they offer they also serve to give a...

Buy

$32.55
Frequently
Purchased With

Item #: 41760 [More info]
[More info] Fuel Tank - Filler Hose Clamps - Pair - Repro ~ 1967 - 1970 Mercury Cougar - 1967 - 1970 Ford Mustang
Original style wire clamps for retaining the filler hose to the tank standpipe and filler neck. These are sold as a pair. Replaces Ford Part #: C5ZZ-8287-A.

Buy

$6.85
Frequently
Purchased With

Item #: 26656 [More info]
[More info] Gasket - Filler Neck to Body - Repro ~ 1969 - 1973 Mercury Cougar / 1969 - 1973 Ford Mustang
Made from fuel resistant cork like original. Modeled off the Mustang \ 69 Cougar gasket which has 5 screws (67-68 Cougar only used 4 screws), but works for any 67-73 Mustang / Cougar. For 67-68 Cougar...

Buy

$0.85

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

D4K06