International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Dust Seal - Ball Joint - Lower - Repro ~ 1967 - 1973 Mercury Cougar

Reproduction 1967, 1968, 1969, 1970, 1971, 1972, and 1973 Lower Ball Joint Dust Seal

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1971 Mercury Cougar
1972 Mercury Cougar
1973 Mercury Cougar

Item #: 26562

Price: $6.45

Cost: 516

Earns: 26

Bonus: 0

Availability

In-Stock Item - Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1971 Mercury Cougar
1972 Mercury Cougar
1973 Mercury Cougar

Description

This Lower Ball Joint Dust Seal reproduction fits the 67, 68, 69, 70, 71, 72, and 73.

Replaces Ford part # C7OZ-3105-A.

Just and FYI, in order to install this boot, the entire lower ball joint must be removed from the lower control arm. That means grinding or drilling out the rivets, or removing bolts is so equipped.

Specifications:

Shipping Weight: 0.10 LBS

(weight shown may be the dimensional weight)

0 Reviews (0.00 of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 26571 [More info]
[More info] Dust Seal - Ball Joint - Upper - Repro ~ 1967 - 1973 Mercury Cougar
This Upper Ball Joint Dust Seal reproduction fits the 67, 68, 69, 70, 71, 72, and 73.Replaces Ford part #: C7OZ-3105-B.*Installation tip - The inside diameter of the grommet is just a hair too small to properly fit...

Buy

$6.45
Frequently
Purchased With

Item #: 11294 [More info]
[More info] Dust Seal - Tie Rod End - PREMIUM - Repro ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Reproduction rubber dust seal or boot with steel reinforcing ring for front suspension inner and outer tie rod ends. 1967-69 Mercury Cougar, Ford Mustang, and many other Ford cars. This is the concours version with...

Buy

$5.25
Frequently
Purchased With

Item #: 11298 [More info]
[More info] Retainer And Gasket - Lower Ball Joint - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Reproduction lower ball joint retainer and gasket. Works on 67 - 73 Cougars and Mustangs.

Buy

$13.65
Frequently
Purchased With

Item #: 26724 [More info]
[More info] Bushing Kit - Strut Rod - Bushings / Washers / Sleeves - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Although this premium reproduction strut rod bushing kit appears very similar to the economy kit, they are in fact superior. The main difference being that the bushings are made from a higher quality rubber...

Buy

$30.35
Frequently
Purchased With

Item #: 26728 [More info]
[More info] Tie Rod End - OUTER - Repro ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Outer tie rod end for 1967 – 1969 Mercury Cougar and Ford Mustang with either power steering or manual steering and with drum or disk brakes. Quality reproduction part. Sold individually, two needed per car....

Buy

$49.75
Frequently
Purchased With

Item #: 26622 [More info]
[More info] Bumpers - Fender to Hood - EACH - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Four per car, mounts to fender. Sold individually. Replaces Ford part #: C7WY-16758.

Buy

$0.85
Frequently
Purchased With

Item #: 26684 [More info]
[More info] Coil Spring Perch - Economy - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Features quality stamped steel construction, bushings, nuts, anti-squeak coil protector pads. From the get go these were never a very good design... The rubber is prone to cracking and the unit will bind under...

Buy

$38.75
Frequently
Purchased With

Item #: 26227 [More info]
[More info] Ram Cylinder - Boot Kit - ECONOMY - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Good fit, includes all hardware shown. We've found that when using our reproduction drop down bracket (for those with headers), the bushings in this kit will rip and tear through the oversized hole, so you can also...

Buy

$27.64
Frequently
Purchased With

Item #: 11979 [More info]
[More info] Coil Spring Perch - PREMIUM - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
High Performance Coil Spring Perches offer a very affordable upgrade to stock spring perches with rubber bushings. These are made with synthetic elastomer bushings which are similar to polyurethane in performance...

Buy

$84.05
Frequently
Purchased With

Item #: 26727 [More info]
[More info] End Link Kit - Front Sway Bar - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Front sway bar end link kits for all classic Cougars. 1967 - 1973 Kit includes spacer, bolt, insulators, nuts, and washers. All new hardware. Kit includes 2 links. Replaces Ford part # C2OZ-5A486-A. ...

Buy

$15.17
Frequently
Purchased With

Item #: 26769 [More info]
[More info] Adjusting Sleeve - Tie Rod - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Sleeve and hardware for joining the inner and outer tie rods together. This also is a 'toe in' adjustment part. Sold individually, two needed per car. Replaces Ford Part #: C2AA-3310-A

Buy

$11.35
Frequently
Purchased With

Item #: 15819 [More info]
[More info] Ball Joint - Upper - 4 Bolt - Repro ~1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
This is the 4 hole version of the ball joint for the 1967 - 1969 Cougar and Mustang. Right is same as left. Two required per car. Hardware included.

Buy

$32.75

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials

I6C01