International Customers Click Here [Updated 1/2025]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Wire Assembly - Dash to Engine Gauge Feed - 390 / 428CJ / SCJ - Repro

Reproduction 390 or 428CJ FE Big Block Engine Feed Harness for the 1969 and 1970 Mercury Cougar and Ford Mustang

Item #: 14020

Out of Stock
Expected back in Stock:
Unknown

Price: $36.09
Online Only Price

Cost: 2888

Earns: 145

Bonus: 0

Availability

Out of Stock - Ships: Unknown

2 Cougar / 2 Mustang Applications

1969 Mercury Cougar
1970 Mercury Cougar
1969 Ford Mustang
1970 Ford Mustang

Description

Big Block FE 390 or 428 engine feed harness that fits the 1969 or 1970 Mercury Cougar and Ford Mustang.

Replaces Ford Part #: C9ZZ-14289-B and D0AZ-14289-A.

Check out the video below on our new gauge tester:

Specifications:

Shipping Weight: 0.10 LBS

(weight shown may be the dimensional weight)

Shipping Dimensions: 3in x 3in x 1in

0 Product Q&A

Number of questions: 0

Please login to ask a question.

0 Reviews (0.00 of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Click here to help us improve this product listing

Why am I being warned about potential exposure to chemicals in motor vehicle parts?

Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
This product is known to contain the following listed chemicals: None

Frequently purchased with:

Frequently
Purchased With

Item #: 11638 [More info]
[More info] Alternator Wiring Harness - XR7 / Eliminator - w/ Ammeter - CONCOURS CORRECT - Repro
1969 Mercury Cougar
1969 Ford Mustang
Nice reproduction of the original alternator wiring harness, 2 pin dog bone style connector and wire colors match up to the original Ford drawings. Application is 1969 Mercury Cougar XR7 and Eliminator models with...

Buy

$44.45
Online Only Price
Frequently
Purchased With

Item #: 31757 [More info]
[More info] Clip Kit - Engine Feed Wire Harness - Repro
1967 - 1973 Mercury Cougar
Vinyl dipped. Clip is used to hold wiring away from hot engine. Also found on trunk floor.

Buy

$4.86
Online Only Price
Frequently
Purchased With

Item #: 11639 [More info]
[More info] Alternator Wiring Harness - Standard - w/ Alternator Warning Light - CONCOURS CORRECT - Repro
1969 Mercury Cougar
1969 Ford Mustang
Nice reproduction of the original alternator wiring harness, 3 pin dog bone style connector and wire colors match up to the original Ford drawings. Application is 1969 Mercury Cougar standard models or 1969 Ford...

Buy

$144.27
Online Only Price
Frequently
Purchased With

Item #: 20122 [More info]
[More info] Shifter Bushings - Automatic Transmission - PAIR - Repro
1967 - 1973 Mercury Cougar
1967 - 1973 Ford Mustang
If your automatic floor shifter has play in it left to right then this is the culprit. Easy to install, (more difficult if you have a 67-68 with center console) these are made from a wear resistant plastic that is...

Buy

$2.88
Online Only Price
Frequently
Purchased With

Item #: 26488 [More info]
[More info] Body Plug Kit - Complete Kit - Rubber - Set of 44 - Repro
1969 - 1970 Mercury Cougar
1969 - 1970 Ford Mustang
44 Piece kit that includes quarter panel drain plugs.

Buy

$25.55
Online Only Price
Frequently
Purchased With

Item #: 14360 [More info]
[More info] Antenna - PREMIUM - Repro
1969 - 1970 Mercury Cougar
1969 - 1970 Ford Mustang
This premium antenna and base is a very close reproduction. Note that it comes with a Mustang base gasket which will work on your Cougar, but will tilt the angle of the mast slightly. Your antenna gasket options...

Buy

$71.85
Online Only Price
Frequently
Purchased With

Item #: 76545 [More info]
[More info] Wire Clip Kit - Repro
1969 Mercury Cougar
1969 Ford Mustang
Master clip kit which includes following fasteners:Door courtesy and speaker Driver side apronEngine feedFirewallFront crossmemberGas tank senderHorn feedPassenger side apron below relayRadio cable to dashSide...

Buy

$65.55
Online Only Price
Frequently
Purchased With

Item #: 25993 [More info]
[More info] Battery Tray - Group 27 - Heavy Duty - Repro
1969 - 1970 Mercury Cougar
1969 - 1970 Ford Mustang
This is what I consider to be "Premium Quality". Very correct in every detail and made in the US! The group 27 larger tray was optional on any Cougar and standard on big block Cougars. Replaces Ford part #...

Buy

$122.65
Online Only Price
Frequently
Purchased With

Item #: 11640 [More info]
[More info] Alternator Wiring Harness - XR7 / Eliminator - w/ Ammeter - CONCOURS CORRECT - Repro
1970 Mercury Cougar
1970 Ford Mustang
Nice reproduction of the original alternator wiring harness, 2 pin dog bone style connector and wire colors match up to the original Ford drawings. Application is 1970 Mercury Cougar XR7 and Eliminator models or...

Buy

$72.36
Online Only Price
Frequently
Purchased With

Item #: 26221 [More info]
[More info] Weatherstrip Seal - Rear Deck / Trunk Lid - Repro
1967 - 1970 Mercury Cougar
1965 - 1970 Ford Mustang
Reproduction rear deck / trunk lid weatherstrip seal for the Mercury Cougar or Ford Mustang. A cheap piece that will keep water out and keep your trunk from rusting. Replaces Ford part #: C5ZZ-6543720. While you're...

Buy

$13.65
Online Only Price
Frequently
Purchased With

Item #: 13909 [More info]
[More info] Switch - Neutral Safety - C-4 / C-6 - Repro
1967 - 1969 Mercury Cougar
1967 - 1969 Ford Mustang
High quality alternative to the expensive OEM switch. If you have an early 67 the plug may be the dual type which is also listed on this site. This will work with your C-4 or C-6 automatic transmission. The only...

Buy

$45.55
Online Only Price
Frequently
Purchased With

Item #: 31598 [More info]
[More info] Distributor Vacuum Hose - 390 / 428CJ - Dual Advance - CONCOURS - Repro
1968 - 1970 Mercury Cougar
1968 - 1970 Ford Mustang
Concours vacuum hose kit with colored stripes. Multiple pieces, connects carburetor, distributor, and thermal vacuum switch on the water neck. Fits all 1968-69 Mercury Cougar or Ford Mustang with S or X code...

Buy

$34.55
Online Only Price

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...