International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Door Striker Plate And Shim Date Stamped 8-66 - Repro ~ 1967 Mercury Cougar - 1967 Ford Mustang

Reproduction Door Striker Plate And Shim Date Stamped 8-66 for the 1967 Mercury Cougar or Ford Mustang

1967 Mercury Cougar
1967 Ford Mustang

2 Review(s) 0

Item #: 41784

Price: $18.85

Cost: 1508

Earns: 76

Bonus: 0

Availability

In-Stock Item - Next Business Day

Applications

1967 Mercury Cougar
1967 Ford Mustang

Description

Very nice reproduction, silver zinc finish like original. Correct texture and even an original type date stamped on the head. Comes complete with striker plate, shim, and screws. The only difference between the 67 Cougar and the 68 - 70 is that the 67 came with the 8-66 date stamp, the rest came with the 11-67 date stamp.

Note: Some Cougars did not have date stamps from factory.

Replaces Ford part #: C5AZ-6222008-A.

Specifications:

Shipping Weight: 0.30 LBS

(weight shown may be the dimensional weight)

2 Reviews (4.88 of 5 Rating)

4.88 out of 5 stars
Based upon 2 Review(s).

5 Stars

50%

4 Stars

50%

3 Stars

2 Stars

1 Stars

Write a review!

Roger

Chandler AZ.

7/12/2019

4.75 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

fits right
works great

Cons:

date stamp appearance

This part fit and worked great to replace the original as the post had become loose and wobbly on the base. The date stamping was nice but very different from my 1967 original. The stamping was on the end of the post instead of on the base. The stamping numbers were also very different in style and appearance. The stamping appearance wasn't important to me but may matter to others.

KENNETH

2019

4/27/2019

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

PERFECT FIT

Cons:

THIS PRODUCT IS OUTSTANDING MY DRIVERSIDE DOOR WORKS PERFECTLY

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 41298 [More info]
[More info] Fastener Kit - Fender - Repro ~ 1967 Mercury Cougar / 1967 Ford Mustang
Reproduction fender fastener kit for Mercury Cougar Standard and XR7.

Buy

$62.91
Frequently
Purchased With

Item #: 26104 [More info]
[More info] Emblem - Door Sill Scuff Plate - Blue Oval Product of Ford Logo - EACH - Repro ~ 1967 Mercury Cougar / 1967 Ford Mustang
This is the aluminum emblem which mounts on the center of all scuff plates. Features raised script surrounded by "Product Of Ford" like original, adhesive backed and protective coating. Sold individually, two...

Buy

$1.25
Frequently
Purchased With

Item #: 42054 [More info]
[More info] Door Hinge Repair Kit - 1967 Through Early 1968 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Kit replaces one side. Contains all necessary parts including pins, bushings, a new cam plate, spring, and roller to rebuild both upper and lower hinges. This kit is for the cast iron type hinges found on the 1967...

Buy

$13.64
Frequently
Purchased With

Item #: 42049 [More info]
[More info] Upper Right Hand - Passenger Side Door Hinge - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Most times you do not need new hinges but rather new bushings and pins. If your hinges are such that the holes are "hogged out" and no longer seat the bushing firmly then you will need to buy one of our good used...

Buy

$61.85
Frequently
Purchased With

Item #: 41142 [More info]
[More info] Screws - Door Handle / Release / Window Crank / Shifter Bezel - Set of 4 - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
One size fits all. Set of 4. Good replacement if not worried about show quality. 1967 – 1968 Coupe 6 Required per car 1969 – 1973 Coupe 4 required per car 1969 – 1973 Convertible 2 required per car Will...

Buy

$0.85
Frequently
Purchased With

Item #: 41506 [More info]
[More info] Reinforcement Plate Kit - Door Latch - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
This area of the door often cracks due to the stress caused by worn out hinges. This twelve piece kit includes six screws and six form fitting washers to reinforce the recessed areas that often crack. If your latch...

Buy

$27.35
Frequently
Purchased With

Item #: 22621 [More info]
[More info] Door Latch - Striker Bumper - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Reproduction rubber bumper for your 67 - 73 Cougar or Mustang door latch mechanism. The bumper sits on the inside of your door latch mechanism, and is there to dampen the blow from the striker when you close your...

Buy

$3.00
Frequently
Purchased With

Item #: 14218 [More info]
[More info] Door Latch Mechanism - Driver Side - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Steel stamped complete latch. See hardware for clips.

Buy

$76.45
Frequently
Purchased With

Item #: 26011 [More info]
[More info] Emblem - 1967 - 68 Deck / Trunk Lid or 1971 - 72 Hood - MERCURY Script - Repro ~ 1967 - 1968 Mercury Cougar / 1971 - 1972 Mercury Cougar
This emblem was used on the driver side of the 1971 - 1972 Cougar hood and on the passenger side of the trunk lid in 1967 - 1968. Also used on various other Mercury products like the Comet, Cyclone, and Marquis...

Buy

$39.47
Frequently
Purchased With

Item #: 41295 [More info]
[More info] Fastener Kit - Rear Valance - Repro ~ 1967 - 1968 Mercury Cougar
Fits 1967 Standard and XR7

Buy

$10.35
Frequently
Purchased With

Item #: 26641 [More info]
[More info] Tips - Sun Visor - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These are usually cracked, shrunk or missing. Your visors will constantly fall out of the center holder if these are missing or shrunken. Sold as a pair. Replaces Ford Part #: D1DZ-6204115-A.

Buy

$0.85
Frequently
Purchased With

Item #: 42053 [More info]
[More info] Upper Left Hand - Driver Side Door Hinge - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Most times you do not need new hinges but rather new bushings and pins. If your hinges are such that the holes are "hogged out" and no longer seat the bushing firmly then you will need to buy one of our good used...

Buy

$65.55

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials

E1G19