Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Support Bracket - A/C Duct Tube - Driver Side - Used ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

Item #: 11-0356

Price: $22.86

Cost: 1829

Earns: 92

Bonus: 0

Availability

Out of Stock - Ships: Unknown

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

Description

Used strap or support bracket for the foam air conditioning vent tube going to the driver side A/C vent. The electrical assembly manual indicates that this strap bracket behind the dash on the driver side. Our findings from the wrecking yard show that 1967 is typically rubber coated, 1968 is bare steel. Please specify is you have a preference. The rubber coated ones will show some deterioration, plan on re-dipping or use as-is. Not exactly the same as the support for the passenger side.

Ford part number C8ZA-19C915-A. Likely C7ZA-19C915-A for 1967.

Specifications:

Shipping Weight: 0.15 LBS

(weight shown may be the dimensional weight)

0 Reviews ( of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 11-0048 [More info]
[More info] Circuit Breaker - 25 Amp - Used ~ 1968 Mercury Cougar / 1968 Ford Mustang
25 AMP circuit breaker for all 1968 Mercury Cougars and Ford Mustangs with factory air conditioning. Mounts on the panel, under the dash, next to the fuse block. This particular breaker was also used on the ASC...

Buy

$10.89
Frequently
Purchased With

Item #: 10863 [More info]
[More info] Ford 9 Inch Rear Axle Rubber Snubber - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Reproduction rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on 1967 - 1968 Mercury Cougar and Ford Mustangs. New part with a fine threaded stud, also called a pinion bumper. The...

Buy

$45.55
Frequently
Purchased With

Item #: 10120 [More info]
[More info] Clip Head Bolt - Defrost Nozzle Attaching - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Clips that attach to the dash for mounting the defrost nozzles. Package of 4 clips and 4 nuts, enough for non air conditioned cars, same clips used for air conditioned cars. Cars with A/C only need 3 clips...

Buy

$10.95
Frequently
Purchased With

Item #: 11-0355 [More info]
[More info] Support Bracket - A/C Duct Tube - Passenger Side - Used ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Used strap or support bracket for the foam air conditioning vent tube going to the passenger side A/C vent. The electrical assembly manual indicates that two of these strap brackets were installed above inside the...

Buy

$22.86
Frequently
Purchased With

Item #: 41583 [More info]
[More info] Speedometer - Driven Gear - 21 Tooth - Manual Transmission - 4 Speed - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. ...

Buy

$8.25
Frequently
Purchased With

Item #: 14258 [More info]
[More info] Brass Float - Fuel Sending Unit - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The problem with these brass floats, is that after year of being in contact with fuel, they will begin to corrode and...

Buy

$8.55
Frequently
Purchased With

Item #: 20362 [More info]
[More info] Bracket - Axle Snubber - 9 Inch Rear Axle - Used ~ 1968 - 1973 Mercury Cougar / 1968 - 1973 Ford Mustang
9 inch rear axle snubber for all 1968-73 Mercury Cougar and Ford Mustang. Will work on 1967 9" differential but has slightly different angles as seen by our pictures. Bare bracket, rubber snubber sold...

Buy

$108.85
Frequently
Purchased With

Item #: 41733 [More info]
[More info] Switch - Turn Signal - Fixed Column - Repro ~ 1967 Mercury Cougar / 1967 Ford Mustang
Our turn signal switches are made on the FoMoCo original tooling. If you have replaced your sequential unit in the trunk with one of our new solid state sequential units and are still having problems then the turn...

Buy

$119.56
Frequently
Purchased With

Item #: 26213 [More info]
[More info] Side View Mirror Mounting Kit - METAL - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet...

Buy

$3.87
Frequently
Purchased With

Item #: 23476 [More info]
[More info] Keeper - Rear Interior Panel - Passenger Side - Used ~ 1967 - 1968 Mercury Cougar / 1968 Ford Mustang
Good used metal part that is not bent or heavily rusted. Will need to be repainted. This mounts at the top front corner of the passenger side rear interior panel. Ford called this part a "Cap - quarter trim panel...

Buy

$35.87
Frequently
Purchased With

Item #: 27507 [More info]
[More info] Bracket - Courtesy Light - LONG - Used ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
These courtesy light brackets are located on the very outer right and left under the dash. Typically this bracket is found on the passenger side of 1967-68 Mercury Cougar and Ford Mustang without air conditioning....

Buy

$19.89
Frequently
Purchased With

Item #: 14363 [More info]
[More info] Heater Cable - With A/C - Repro ~ 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang
Reproduction heater cable for Mercury Cougars and Ford Mustangs equipped with factory A/C. This unit is an exact fit!Replaces part # C7ZZ-19988-A.

Buy

$18.15

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

S11E14