Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Because of extreme wildfire conditions, we are under LIMITED Staff and LIMITED Hours Restrictions.
Orders may be delayed.
We now require a $25 $5* minimum website order (Read More)
loading . . .
'https://storeimages-westcoastclassic.netdna-ssl.com/dc/13802/1537907186_j.jpg'

Item #: 13802

Login to add this item
to a saved wishlist
Price: $15.85
    Cost: 1268
    Earns: 16
    Bonus: 0

    Availability:

    Out of Stock - Unknown

    Reproduction Sun Visor Bracket & Rod for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang. Great quality and fit, left and right use same part, sold separately.

    Replaces Ford part # C7AZ-6204144-A.


    Specifications:
    Shipping Weight: 1.00 LBS
    (weight shown may be the dimensional weight)
    (4.31 out of 5 stars) Customer Rating based upon 8 Review(s).

    Not a tight fit.

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.50 out of 5
    Pros:
    • Look great
    Cons:
    • Poor fit.
    These brackets look original but the original visor is sloppy on it, tried to gently crimp it but the visors still falls, may end up having to buy the repro visors if we can't figure out a "fix" to keep them up.

    Melbourne, Australia

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    • Quality product. Fittment.
    Cons:
    Great reproduction part. Great finish to clean up interior.

    Australia

    Perfect

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    • Perfect fit and finish
    Cons:
    • None
    These fit perfectly. Used them with new sunvisors so not loose at all. Chrome looks nice.

    Gastonia

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    2.00 out of 5
    Pros:
    • nice%20finish
    Cons:
    • will%20not%20fit
    • visor%20falls%20down
    • %20one%20star%20fit%20because%20had%20to%20give%20one
    fit was not good! Visors will not stay up!Cleaned and replaced originals!!

    Lake Hughes, CA.

    Looks great but...

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    3.00 out of 5
    Pros:
    Cons:
    The diameter of the rods I got are obviously different than stock, the stock visors do not stay up on these and are loose. Took pliers and a rag (to protect my original visors) and pinched the receiving tube in the visor to tighten up the fit. It worked but who wants to manhandle their original visors.

    Number of questions: 1
    Please login to ask a question.
    Question
    : 0 : 0
    Asked:
    September 27, 2020 7:12 AM
    Hi: Any suggestions on the the quality of the sun visor repros. My originals are very pitted
    Answer
    : 0 : 0
    WCCC Admin Answered:
    September 30, 2020 7:33 PM
    These are very nice reproductions and work fine with most visors, but seems to be a slightly smaller diameter than some of the OEM rods, requiring that you carefully crimp down the tube embedded in the OEM visors to make them work. These work flawlessly with the reproduction sun visors.

    Reproduction Sun Visor Bracket & Rod for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang. Great quality and fit, left and right use same part, sold separately.

    Replaces Ford part # C7AZ-6204144-A.


    Specifications:
    Shipping Weight: 1.00 LBS
    (weight shown may be the dimensional weight)
    (4.31 out of 5 stars) Customer Rating based upon 8 Review(s).

    Not a tight fit.

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    4.50 out of 5
    Pros:
    • Look great
    Cons:
    • Poor fit.
    These brackets look original but the original visor is sloppy on it, tried to gently crimp it but the visors still falls, may end up having to buy the repro visors if we can't figure out a "fix" to keep them up.

    Melbourne, Australia

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    • Quality product. Fittment.
    Cons:
    Great reproduction part. Great finish to clean up interior.

    Australia

    Perfect

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    5.00 out of 5
    Pros:
    • Perfect fit and finish
    Cons:
    • None
    These fit perfectly. Used them with new sunvisors so not loose at all. Chrome looks nice.

    Gastonia

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    2.00 out of 5
    Pros:
    • nice%20finish
    Cons:
    • will%20not%20fit
    • visor%20falls%20down
    • %20one%20star%20fit%20because%20had%20to%20give%20one
    fit was not good! Visors will not stay up!Cleaned and replaced originals!!

    Lake Hughes, CA.

    Looks great but...

    Material:
    Fit:
    Craftsmanship:
    Correctness:
    3.00 out of 5
    Pros:
    Cons:
    The diameter of the rods I got are obviously different than stock, the stock visors do not stay up on these and are loose. Took pliers and a rag (to protect my original visors) and pinched the receiving tube in the visor to tighten up the fit. It worked but who wants to manhandle their original visors.

    Number of questions: 1
    Please login to ask a question.
    Question
    : 0 : 0
    Asked:
    September 27, 2020 7:12 AM
    Hi: Any suggestions on the the quality of the sun visor repros. My originals are very pitted
    Answer
    : 0 : 0
    WCCC Admin Answered:
    September 30, 2020 7:33 PM
    These are very nice reproductions and work fine with most visors, but seems to be a slightly smaller diameter than some of the OEM rods, requiring that you carefully crimp down the tube embedded in the OEM visors to make them work. These work flawlessly with the reproduction sun visors.
    For your convinence, you can view this page on our old site by the following link:
    View Page On Old Site.