Home >
Daniel Carpenter / Dennis Carpenter
Products (Click sub-categories above to ONLY display results for that Sub-Category) 25-48 of 410
Display Options:
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25872 -
These reproduction lens gaskets are a perfect fit and are sold as a pair for your Mercury Cougar.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26225 -
This kit is for both sides and its function is to seal the taillight housings to the tail light panel. The oval gaskets make a seal around the openings for the individual tail light socket openings and the long strips go around the perimeter. The detail on this kit is poor, if your originals are in good shape we suggest reusing them and not purchasing these.Replaces Ford part # C9WY-13520-K. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26521 -
Fits along the lip of the cowl cover and seals to the underside of the hood. Replaces Ford Part #C9ZZ-16740.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26480 -
You will need new window gaskets if you plan on changing the headliner. Replaces Ford part #: C9WY-6542084. Installing it yourself? bedding compound is required for a complete seal.Here are some useful tips on installing this seal made by DCMR.From KTL Restorations; Our cure for installing this less than perfect fitting reproduction is to use the longer trim clips (black ones). The clips Ford used were red oxide and the reproduction clips are green. The black clips extend up about 3/32 of an...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25971 -
This kit is designed for the 1969-1970 heater A/C box. Replaces Ford Part #: C9ZZ-18500-A. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 25968 -
Correct heater box seal kit for 1969 and 1970 Cougars and Mustangs. Replaces Ford part #: C9ZZ-18500-B. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26530 -
Fills the hole in the core support where the A/C lines pass through to the condenser. Replaces part # C9ZZ-19819.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26678 -
Used to seal the Aluminum shifter housing to the transmission tunnel. Replaces Ford part #: C9ZZ-7370. Check out our video on rebuilding your shifter below: ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26566 -
Reproduction cowl cover to hood rubber bumpers for the Mercury Cougar or Ford Mustang. These little units attach to the front of the cowl cover for the back corners of the hood to sit on. These will also work for the 1967-68 Mercury Cougar or Ford Mustang fuel filler door bumpers if you are missing them. Sold as a pair and comes with the attaching screws. *NOTE* These are not an exact replacement, rather a part from another year and application that has been found to be an adequate...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26605 -
The 1969 - 1970 windshield washer kit varies slightly from the 67-68. Replaces Ford part #: C9ZZ-17543.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 26139 -
The picture above shows these bumpers installed in the 100% correct reproduction console that we sell. These are sold individually, 2 required per car. Replaces Ford part # 379919.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26570 -
Pair of anti rattle spacers / guards that go between the fender and the cowl on each side. The majority of 1969 Cougars and Mustangs used a black foam block glued to the cowl but in late 1969 and all of 1970 these wedge shaped rubber parts were used. Replaces Ford part number C9ZZ-16758-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26224 -
Reproduction firewall to hood seal or cowl seal for the Mercury Cougar or Ford Mustang. Comes with attaching clips. Replaces Ford part # D1ZZ-16740.Customer feedback from mercurycougar.net: Don and WCCC were always one of the service quality benchmarks for my business. Despite the many pressures faced by any small business owner, Don always treated me and my car as if we were his only customer. And, he NEVER let me down - parts always as advertised, and delivered timely.That impressed me then,...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26677 -
Seal the steering column flange to the firewall. Used on cars with automatic transmission. Replaces Ford part # D1ZZ-3513
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26573 -
Sold in a set of three, includes attaching screws. Replaces part # 380478-S3
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26640 -
Sold individually, two required per car.
Replaces Ford Part #: 375838
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 19966 -
These form a seal between your rear marker lights and the quarter panels. Replaces part # D1ZZ-15447. Sold as a pair.