Home > 1967 Mercury Cougar
All Available Parts - 1967 Mercury Cougar
Products (Click sub-categories above to ONLY display results for that Sub-Category) 801-900 of 4984
Sorted By:
Availability:
Display Options:
Availability: In-Stock Item
Item #: 41260 -
Sold individually. Used on factory 2V Ford carburetors. Zinc (dark gray)
Availability: In-Stock Item
Item #: 14625 -
[No Description Provided]
Availability: Used / Wrecking Yard Item
Item #: 19099 -
The 289 used a transverse muffler with hangers on either end and dual exhaust was not an option. The 289 Cougars for 1967 also did not use a tail pipe hanger like their 390 brethren did, the tail pipes were free hanging. We have observed in the many 1967 parts cars in our yard that many Cougars have had an after market tail pipe hanger installed at some point. Many Cougars have a hanger welded or bolted to the passenger side tie down bracket.
Availability: Used / Wrecking Yard Item
Item #: 24176 -
Bracket and insulator that mounts to the body and the left side of the factory transverse muffler. All 289 engine applications. Ford part number C7WY-5260-A or C7WY-5260-B. *Trivia - All 1967 Cougars with 289 engines had a single exhaust from the factory. Both the C code 289-2V and A code 289-4V.
Availability: Used / Wrecking Yard Item
Item #: 24177 -
Bracket and insulator that mounts to the body and the right side of the factory transverse muffler. All 289 engine applications. Ford part number C7WY-5260-B.
Availability: Used / Wrecking Yard Item
Item #: 10944 -
Band or ring style factory exhaust pipe clamp. For 2 inch outside diameter exhaust pipes. Comes with a course sheet metal type threaded hex head bolt. Ford part number C5DA-5A272-B. *Note all 1967 & 1968 Cougars had 2 inch tailpipes from the factory. Check the outside diameter of your current tailpipe for fitment. Part number C6AA-5A272-A is the factory style 2-1/4" tailpipe clamp.
Availability: In-Stock Item
Item #: 14036 -
This screw / stud seems to always be missing. This screw is just a little longer than stock to accommodate installing the Hi-Po air cleaner. Fits most Autolite carburetors. Size: 4 1/8 inches length 1/4-20 X 5/16-18 threads. Check your thread size on the carburetor, we think that starting in 1969 the Autolite 4300 carburetors had 1/4-20 threads. Please note that this stud has 5/16-18 threads going into the carburetor. Replaces Ford Part #: 370971-A *Note - Check your carburetor, it will...
Availability: In-Stock Item
Item #: 41126 -
Replaces Ford Part # 359747-S
Availability: Used / Wrecking Yard Item
Item #: 19481 -
These were used to attach the taillight assembly to the tail panel on a 1969-70 Cougar. Five were used per taillight, 10 required in all for one car. Sold individually. Also the same size for 1967-68 tail lights.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a...
Availability: In-Stock Item
Item #: 41198 -
Correct Fit and finish for 1967, and works for 1968. Connects the overhead roof console to the mounting bracket. The only difference between the 67 and 68 kits are that the 67 screws are chrome and the 68 are zinc. The zinc will discolor over time, so we suggest using the 67 kit on a 68. Replaces Ford Part #: 519A58
Availability: Used / Wrecking Yard Item
Item #: 12829 -
Used grade A trim ring for a 1967 Cougar style steel wheel. 1967 Cougar style steel wheels are 14 x 5.5" wide and 1.75" deep, one year only wheel. Looks very similar to the 1968 SS wheel. No dings or scratches that cannot be buffed out. sold individually.Replaces Ford part number C6ZZ-1210-A.
Availability: Download
Item #: 90010 -
Click here to view the low resolution version of the power steering illustration from the Ford Master Parts Catalog. If you would like a free copy of the high resolution version, just add it to your cart and you will be given a link to download it on checkout.
Availability: Download
Item #: 90017 -
1967 Mercury Cougar Headlight Vacuum Diagrams To download the full high-resolution version, please add this item to your cart and check out. You will receive a download link automatically.
Availability: Download
Item #: 90014 -
This article explains how to switch out the headlight vacuum actuators on the 1967 and 1968 Mercury Cougar in under an hour. Just click "add to cart" and go through checkout, and you'll get a link in your email to download the high resolution version of this article. Do you want to replace those worn out actuators yourself or are you looking for some more great information on your Cat’s headlight vacuum system? The video below is your ticket! ...
Availability: Download
Item #: 90021 -
Another great free download for you, our customer! In this free download, John Brower guides you through the installation of an overlay on your dashboard on your Mercury. Simply add this item to your cart and you will receive the download link via email after you complete the order.
Availability: In-Stock Item
Item #: 19951 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.Sold Individually.We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare. You'll also save...
Availability: Out of Stock
Item #: 26123 -
This 1/2" tall unique little screw was used on several different trim parts on the early Mercury Cougars. You will notice the reproduction has a larger head (The two on the right in the lower picture are repros) than both of the used versions typically found on 67-73 Cougars. This will be a benefit to those that have elongated screw holes on your wheel lip mouldings from corrosion or improper removal. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding,...
Availability: In-Stock Item
Item #: 41280 -
Stainless screw, most correct looking we have found. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding, two per center grille moulding and five per hood lip moulding for a total of 50 screws. In 1969 - 1973 they were used on the wheel lips mouldings. The 1971 - 1973 hood lip mouldings used the same screw but it was 5/8" tall. SOLD AS A SET OF 10.Fits:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1971 Mercury Cougar1972...
Availability: In-Stock Item
Item #: 41336 -
This is our reproduction quarter panel extension nut for the Mercury Cougar or Ford Mustang. These are sold individually.Replaces Ford part # 373556-S. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...
Availability: In-Stock Item
Item #: 41253 -
Sold individually.
Zinc (dark silver)
Availability: In-Stock Item
Item #: 14321 -
Self threading white plastic. Used on front and rear valances.Sold individually.
Availability: In-Stock Item
Item #: 41144 -
Seven (7) of these acorn nuts are used to hold the trunk trim moulding on to the trunk. Replaces Ford Part # 377767 For more insight on this tricky trunk trim, check out our video below: ...
Availability: In-Stock Item
Item #: 32084 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This listing is for a bag of 25 clips. We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare....
Availability: In-Stock Item
Item #: 32650 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This particular clip is used on many Ford cars throughout the 60's and 70's.This listing is for a box of 100 clips. We recommend buying...
Availability: In-Stock Item
Item #: 30852 -
Stainless screw, most correct looking we have found. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding, two per center grille moulding and five per hood lip moulding for a total of 50 screws. In 1969 - 1973 they were used on the wheel lips mouldings. The 1971 - 1973 hood lip mouldings used the same screw but it was 5/8" tall. SOLD individually. See related items for kit of 10 screws. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970...
Availability: In-Stock Item
Item #: 41604 -
Cork valve cover gaskets for any big block Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.
Availability: In-Stock Item
Item #: 10628 -
New timing cover gasket set for the 1967-70 Mercury Cougar and most Fords with 390-2V, 390-4V, 427-4V, and the 428 Cobra Jets. Gasket set includes; crankshaft seal, timing cover gasket, two water pump gaskets, fuel pump gasket, and oil pan to timing cover gasket.
Availability: In-Stock Item
Item #: 10626 -
New timing cover gasket set for 1967-70 Mercury Cougar and most all Fords with 289/302/351W engines. Gasket set includes; timing cover gasket, crankshaft seal, water pump gasket for early or late water pumps, and the oil pan corner gaskets under the timing cover.
Availability: In-Stock Item
Item #: 18736 -
Set of 6 bolts for installing an OEM Ford timing cover marked C5OE-6059-A, which originally came on all 1967 Mercury Cougars with 289 engines or 1965-67 Fords including Mustang with 289 engines. 5 short and 1 long bolt in this kit.
Availability: In-Stock Item
Item #: 21617 -
Set of 10 bolts for installing an OEM Ford timing cover marked C3AE-6059-A, which originally came on all 1967 Mercury Cougars with 390 engines or 1963-67 Fords including Mustang with 352 / 390 / 410 / 428 engines. 10 total new bolts.*Note - this kit is not applicable to the 1968 and later Ford FE timing covers. See related items for other kit.
Availability: In-Stock Item
Item #: 12208 -
Reproduction stainless Allen head valve cover bolts. The bolts a re a bit longer to accommodate for the extra spacing required on the aluminum finned valve covers.
Availability: In-Stock Item
Item #: 12207 -
Reproduction black Allen head valve cover bolts. The bolts a re a bit longer to accommodate for the extra spacing required on the aluminum finned valve covers.
Availability: Used / Wrecking Yard Item
Item #: 31181 -
Crankshaft oil slinger for all small block Ford V-8's, starting 1963 until at least through 1973. 1963-68 289 and 289 HiPo engines. 1968-73 302 engines, 1969-70 Boss 302 engines, 1969-73 351W engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Outside diameter about 2-7/8 inches. Ford part number C3OZ-6310-A.
Availability: Used / Wrecking Yard Item
Item #: 31184 -
Crankshaft oil slinger for all FE Ford V-8's, starting 1958 until at least through 1976. 1967-69 390 engines, 1968 427-4V engines, 1968-70 428, 428CJ, 428SCJ engines, 1958-66 352, and 1968-76 360 engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Outside diameter 3-5/16 inches. Ford part number B8A-6310-A.
Availability: In-Stock Item
Item #: 31255 -
Reproduction high quality chrome calve covers. Designed to fit small block engines. OE on 64 - 66 HiPo "K" engines. Will also fit the 302. These were actually used on the 65 - 66 Mustang but some folks like to use them on the Cougar because of their clean no nonsense look. Keep in mind this pair requires the push on oil cap, not the twist on. Sold as a pair. ...
Availability: In-Stock Item
Item #: 31621 -
Gasket for mounting the oil filter adapter to any FE or Ford 360, 390, 410, 427, 428CJ engine. Name brand gasket, fits all 1967-70 Mercury Cougar or Ford Mustang with S, X, R, Q, or W code engines.
Spotlight!
Featured!
Availability: In-Stock Item
Item #: 13840 -
These valve covers no longer come with the word "Cougar", only the walking cat. Before these high quality reproductions were reproduced original pairs often traded hands for $400-600. This pair is better quality than the originals in every way. They will allow for roller tip rockers (unlike originals) have better quality casting characteristics and are made from better material. These were standard on every 1968 302 XR7-G and an over the counter option for any 289 302 or 351 Windsor equipped...
Availability: In-Stock Item
Item #: 11666 -
Same as our crinkle finished Mercury Cougar valve covers but with a polished finish. These are rarely in stock so do not be surprised if our system will not let you order. We get these from Scott Drake and the only reason they polish a few sets a year is when they find a set of black covers that have a defect, they send them in to be polished. So... The only time we have these in stock is when they find blems to polish. Please do not ask us when we expect to get more in, we have no idea when...
Availability: In-Stock Item
Item #: 26038 -
These "Cal Custom" style Valve Covers look great and really compliment the Finned Oil Pan and Air Cleaner. These covers offer a true "old school" look. * Requires one of each of the following (sold separately): PVC grommet, oil cap grommet, and push on style oil cap.
Availability: In-Stock Item
Item #: 13841 -
1967 - 1969 Mustang, Cougar, Fairlane GT, and Ford vehicles with FE Series 390-427-428-428CJ engines. Chromed steel "Power By Ford" valve covers. Original equipment on all "S", "W" & "R" code big block Cougars. Super detail, domed chrome valve covers with embossed "Power By Ford" lettering. Also has internal baffles installed as original, price per pair. Click on images to enlarge. ...
Availability: In-Stock Item
Item #: 41425 -
D shaped, slightly lower profile than the D0OZ-6892 and designed for the thinner stamped steel valve covers, no Ford part number on part. Replaces Ford Part # C6AZ-6892
Availability: In-Stock Item
Item #: 42059 -
These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.
Availability: In-Stock Item
Item #: 42060 -
These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.
Availability: In-Stock Item
Item #: 41613 -
Rubber valve cover gaskets for any 289 302 351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.
Availability: In-Stock Item
Item #: 41607 -
Cork valve cover gaskets for any 289/302/351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.
Availability: In-Stock Item
Item #: 41614 -
Rubber valve cover gaskets for any FE 390 or 428 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.
Availability: In-Stock Item
Item #: 11375 -
Reproduction Ford blue painted valve covers for 289 - 302- 351W engines. These have 6 bolts to attach the valve covers. Excludes 351 Cleveland engines, they have 8 bolts for attaching.
Availability: In-Stock Item
Item #: 11376 -
Reproduction chromed valve covers for 289 - 302- 351W engines. These have 6 bolts to attach the valve covers. Excludes 351 Cleveland engines, they have 8 bolts for attaching.
Availability: In-Stock Item
Item #: 27450 -
This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D.
Availability: In-Stock Item
Item #: 41093 -
Sold as a Kit as Pictured.
Availability: In-Stock Item
Item #: 41232 -
Sold individually. Zinc (dark silver) finish.Little known fact: these aren't Phillips head screws, they are actually Pozi head / Pozi-Driv screws. While you can usually get a large Phillips screwdriver to work, the correct tool for these fasteners is a size 4 Pozi bit.
Availability: In-Stock Item
Item #: 26153 -
Replaces Ford Part #C7AZ-6243629-A. Not used on 1967-78 trunk locks.
Availability: In-Stock Item
Item #: 10541 -
Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This unit measures about 1-7/8" long with a stud height of about 3/4". 7 clips needed per trunk lid. Note that this clip features a stud that is a little longer than what was factory. If you have a swollen lip (rust) on your deck this will be an advantage to you, if not you will have to...
Availability: Out of Stock
Item #: 10542 -
Reproduction large moulding / trim clip for the rear quarter extensions and front fender extensions on the Mercury Cougar. The molding / trim on the 1967-68 rear quarter extension and 1969 front fender extension both require 2 different sizes of clips to properly hold them in place. For the 1967 and 1968 rear quarter extensions, you will need one of these large clips and 1 smaller clip per side. For the 1969 Cougar you will need 1 of these larger clips along with 2 smaller clips per side. This...
Availability: In-Stock Item
Item #: 25983 -
This trim ring will fit any 14" 67 - 70 Cougar Styled Steel wheel even though the width originally varied from 1.75" in 67, to 2" in 68 - 70. This ring measures exactly 2" high and has the correct bevel like original. The hue is as bright as original and it is the polished version, not brushed like the 68 used. Good tight fit, best of the 4 different makes you will see advertised around the country. Unlike the originals, these do not self center very well. You can however adjust them into...
Availability: In-Stock Item
Item #: 18646 -
Bare Metal oil pan. Has no paint, chrome, or protective coating. Replaces Ford Part #: C5ZZ-6675
Availability: In-Stock Item
Item #: 17771 -
Reproduction Small Block Painted Oil Pan for the Mercury Cougar or Ford Mustang 289 or 302
Availability: In-Stock Item
Item #: 14234 -
OEM Style Oil Pan Gasket.
Availability: Ships Direct from Supplier (Except International)
Item #: 15311 -
This is by far the best, most correct FE pan ever offered. Very accurate reproduction of the C6OZ-6675-A oil pan used first on the 1966 Fairlane and Comet with one of the 390 CI optional engines. It is 100% correct for 1968 and early 1969 428CJ. It is not 100% correct for the 428SCJ but still a good alternative.
Availability: In-Stock Item
Item #: 15379 -
Rubber Style Oil Pan Gasket. Four Piece Gasket. 1967-70 Mercury Cougar and Ford Mustang, includes 1969-70 G code Boss 302 engines.
Availability: In-Stock Item
Item #: 11006 -
New oil pan drain plug with zinc coating and plastic gasket. Fits all Mercury Cougar and Ford Mustang V8 oil pans 1967-73.
Availability: In-Stock Item
Item #: 11007 -
Replacement oil pan plug that is magnetized for collecting ferrous metal in the oil system. Replaces Ford part number C5ZZ-6730-M and D1AZ-6730-A. Fits all Ford engines 1967-73, including 6 cylinder, 289, 302, 351w, 351c, 352, 390, 427, 428, 429, 460.
Availability: In-Stock Item
Item #: 11003 -
Reproduction oil pan bolt kit for the Mercury Cougar or Ford Mustang equipped with the 289, 302, or 351W engine.
Availability: In-Stock Item
Item #: 13120 -
New oil pan drain plug, Ford engine blue painted, with plastic gasket. Looks correct, but has a different sized head than factory oil pan bolts. Correct 1/2" - 20 bolt diameter and thread pattern for factory Mercury Cougar and Ford Mustang V-8 oil pans 1967-73.Replaces Ford part # D1AZ-6730-A / D1AZ-6730-B (bolt) & C2OZ-6734-A (gasket).The Ford Master Parts Catalog lists bolt D1AZ-6730-B as the service replacement for all factory oil pans for the 200,...
Availability: In-Stock Item
Item #: 13121 -
New Chrome oil pan drain plug, with plastic gasket. Has a different sized head than factory oil pan bolts.Correct 1/2" - 20 bolt diameter and thread pattern for factory Mercury Cougar and Ford Mustang V-8 oil pans 1967-73.Replaces Ford part # D1AZ-6730-A / D1AZ-6730-B (bolt) & C2OZ-6734-A (gasket).The Ford Master Parts Catalog lists bolt D1AZ-6730-B as the service replacement for all factory oil pans for the 200, 240, 250, 289, 302, 351, 352, 410, 427, 428, and 429 engines 1965-1973. ...
Availability: In-Stock Item
Item #: 31055 -
Oil pan bolt kit for all FE 390, 427, and 428 engines. Set is made by AMK and includes 20 OEM style bolts and washers. We sell them specifically for 1967-70 Mercury Cougar and Ford Mustang, but they will fit most all Ford "FE" engines including 352, 410, and 360 Ford engines. If you happen to have a 428CJ with windage tray, we also offer a set of bolts for that application too. ...
Availability: In-Stock Item
Item #: 31056 -
Oil pan bolt kit for all 428 Cobra Jet and 428 Super Cobra Jet engines with windage tray. Set is made by AMK and includes 20 OEM style bolts and washers.
Availability: Used / Wrecking Yard Item
Item #: 33549 -
Used oil screen pick up tube assembly from a small block Ford 260, 289, or 302 engine. This is for most front sump 260, 289, or 302 engines in Ford cars up to at least 1972. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item.* Excludes 351W and 351C engines, and all F Series...
Availability: In-Stock Item
Item #: 41064 -
Reproduction 270 piece interior master fastener kit for the Mercury Cougar that fits both Standard and XR7. *NOTE* If you click on the selections below, they will take you to each of the sub kits that are included in the main fastener kit. In this kit you will receive the following fasteners: Sun Visor Brackets Kick Panels Armrests (front) Seat Back Adjustment Scuff Plates Glove Box Catch Seat Back Scuff Plates Glove Box Latch Ashtray Liner Mirror Bracket (interior) Glove Box Liner Carpet to...
Availability: In-Stock Item
Item #: 41183 -
Fits 1967 and 1968 Standard or XR7. Holds "J" shaped plastic hinge covers in place.
Availability: In-Stock Item
Item #: 26077 -
1969-70 actually used a star head bolt but these are a much more user friendly screw that will work in its place. Sold in a set of four which is what you will need for one seat.
Availability: In-Stock Item
Item #: 41177 -
Fits 1967 - 1973 Standard or XR7. Pins not used on 71-73 buckets.
Availability: Rare / NOS Part
Item #: 26804 -
Ford Part # 379390-s
Sold individually
Availability: In-Stock Item
Item #: 26066 -
Includes a pair of chrome screw adjusters, nuts and washers, heavy duty plastic rest plates and attaching screws to repair or replace that missing seat back adjustment.Replaces Ford Part #: C1DZ-6461643
Availability: In-Stock Item
Item #: 41223 -
Fits 1967 Standard or XR7
Availability: In-Stock Item
Item #: 41338 -
Four nuts per bucket seat, 8 total nuts per car with bucket seats. Sold individually. Replaces Ford part # 378643-S. Phosphate & Oil (gray & black) finish
Availability: Used / Wrecking Yard Item
Item #: 20179 -
Unlike our reproduction nuts these good used original nuts can be purchased individually and they cost less to boot! 8 required per car, 4 per bucket seat.
Availability: In-Stock Item
Item #: 41026 -
Four required per seat, eight per car equipped with bucket seats. Actual bolt length is 1-1/2 inches.Sold individually.
Availability: In-Stock Item
Item #: 41188 -
Fits 1967 - 1973 Standard or XR7
Availability: In-Stock Item
Item #: 41191 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41215 -
Reproduction XR7 Console Fastener Kit for the 1967 and 1968 Mercury Cougar
Availability: In-Stock Item
Item #: 41181 -
Fits 1967 and 1968 Standard or XR7
Availability: Used / Wrecking Yard Item
Item #: 19105 -
This clip attaches the rear edge of the Xr7 overhead console to the support bracket. In 1968 the more common door panel clip was used for this application. The door panel clip can also be used for your 1967 model, we recommend the used clip over the new one.
Availability: Used / Wrecking Yard Item
Item #: 19817 -
This unique little clip looks a lot like the more common door panel clip but on close inspection you will find it is different. Whereas there are slots for three of these per side, only two per side were installed at the factory.Replaces Ford part number 352775-S100.
Availability: In-Stock Item
Item #: 41206 -
Fits 1967 - 1968 Standard or XR7
Availability: In-Stock Item
Item #: 26063 -
This is a very specialized screw that you do not want to fail or make do with an incorrect fitting or stripped screw. When removing your old screw you will most likely have to pull your pedal assembly and have a perfect fitting screw driver to remove the screw as the factory put them in very tight!
Availability: In-Stock Item
Item #: 13921 -
Secures cable to heater control assembly, heater plenum and heater box. Black oxide bracket with screw.Replaces Ford part number 378897-S
Availability: In-Stock Item
Item #: 41179 -
Fits 1967 Standard and XR7 Cougars or most Ford and Mercury with inside rear view mirrors. Also used on the 1967 xr7 hash marks located on the rocker.
Availability: In-Stock Item
Item #: 41218 -
Dash pad and moulding kit. Fits both Standard or XR7
Availability: In-Stock Item
Item #: 41184 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41190 -
Fits 1967 and 1968 Standard or XR7. This kit is nothing more than common door panel clips instead of the correct, unique 1967 A pillar pad clips or 68 A pillar pad clips . These can be made to 'work', but we highly recommend ordering the correct used clips.For the Correct 1967 A pillar pad clips, click here.For the Correct 1968 A pillar pad clips, click here. ...
Availability: In-Stock Item
Item #: 41193 -
These self-tapping screws attach the cardboard taillight protectors to the body, inside the trunk. Fits 1967 and 1968 Standard or XR7, sold in set of 4.
Availability: Out of Stock
Item #: 41180 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41185 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41268 -
Sold individually. Two needed for globe box cable 1967-70 Mercury Cougar. 3 needed for installation of turn signal switches 1967-73 Mercury Cougar or Ford Mustang.Ford number 379203-S. Phosphate & Oil (gray-black)
Availability: In-Stock Item
Item #: 41203 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41187 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41194 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 30859 -
Fits 1967 and 1968 Standard or XR7
Availability: In-Stock Item
Item #: 41189 -
Fits 1967 and 1968 Standard or XR7