Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Top side, facing the carburetor.

Carburetor Spacer Plate - 428CJ - Repro ~ 1970 Mercury Cougar / 1970 Ford Mustang

Reproduction 428 Cobra Jet Carburetor Spacer Plate for the 1970 Mercury Cougar / Ford Mustang

1970 Mercury Cougar
1970 Ford Mustang

Item #: 41935

Price: $81.85

Cost: 6548

Earns: 328

Bonus: 0

Availability

Out of Stock, On Order - Ships: Often less than 2 Weeks, Unless Supplier is Backordered
(Use 'Notify Me' button to get an alert when in stock)

Applications

1970 Mercury Cougar
1970 Ford Mustang

Description

CARBURETOR SPACER PLATE, 0.28" thick, has correct straight 1/2" PCV hose nipple in rear. Replaces Ford Part Number DOOZ-9A589-A. PCV System overview courtesy of Mansfield Mustang.

Specifications:

Shipping Weight: 0.50 LBS

(weight shown may be the dimensional weight)

0 Reviews (0.00 of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 1

Please login to ask a question.

Question

Asked:

Do you need a special gasket with this reproduction?

April 25, 2021 1:12 PM

Answer

WCCC Admin Answered:

You just use 2 of the regular gaskets for that application, one top and one bottom of the spacer. Gasket is ITEM #: 15292.

April 25, 2021 7:04 PM

Answer

Answered:

Does the reproduction have the void under the bottom side towards the manifold like the originals or is it enclosed so it will work with aftermarket intakes?

April 26, 2021 6:30 AM

Answer

WCCC Admin Answered:

Customer Question: Does the reproduction have the void under the bottom side towards the manifold like the originals or is it enclosed so it will work with aftermarket intakes?

Answer: We have updated the images of the product to make this more clear.

April 27, 2021 6:11 PM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 53275 [More info]
[More info] Carburetor Installation Stud Kit For 1/4 - 3/8 Spacer Plates - Repro ~ 1967 - 1973 Mercury Cougar - 1967- 1973 Ford Mustang
This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (1 3/4"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course...

Buy

$9.25
Frequently
Purchased With

Item #: 13373 [More info]
[More info] Bushings - Sway Bar Clamp - Front - Shelby / Boss 302 / Cobra Jet - PAIR - Repro ~ 1969 - 1970 Mercury Cougar
It took a long time but our supplier finally got this bushing right. They ended up copying a never installed production original bushing Ed Meyer acquired from the Kar Kraft factory back in the day. All details...

Buy

$27.35
Frequently
Purchased With

Item #: 11213 [More info]
[More info] Wiring Harness - Low Fuel Sending Unit - Used ~ 1969 - 1970 Mercury Cougar
Wiring pigtail for the low fuel sending units on 1969-70 Mercury Cougar XR7 and standard models with low fuel warning light option. The Safety Convenience Option included a low fuel warning light. This pigtail has...

Buy

$62.85
Frequently
Purchased With

Item #: 26527 [More info]
[More info] Seal Kit - Quarter Post To Window - PAIR - Repro ~ 1970 Mercury Cougar / 1970 Ford Mustang
Will fit the 69 coupe or convertible as well, but correct for the 70. Replaces Ford part # D0ZZ-6528182 Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your...

Buy

$14.15
Frequently
Purchased With

Item #: 14314 [More info]
[More info] Clip - Speedometer Cable - EACH - Repro ~ 1967 - 1970 Mercury Cougar - 1967 - 1970 Ford Mustang
This is the speedometer cable clip that connects to the firewall and transmission tunnel. Replaces Ford Part # : 373829

Buy

$3.95
Frequently
Purchased With

Item #: 41943 [More info]
[More info] Stud Kit - Spoiler to Trunk - Rear Deck / Trunk Lid - Repro ~ 1969 - 1970 Mercury Cougar
This kit mounts the spoiler pedestals to the trunk lid. Studs measure 2-3/4" long, correct for the Concours correct stands.Some economy or generic kits come with 1-1/2" studs

Buy

$34.09
Frequently
Purchased With

Item #: 42057 [More info]
[More info] Spark Plug Wire Seperator - BLACK - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Made of heat resistant black nylon. Keeps spark plug wires neat and orderly.

Buy

$0.85
Frequently
Purchased With

Item #: 41706 [More info]
[More info] Elbow - Heater Hose - Boss 302 / 428CJ - PREMIUM - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Concourse correct 90 degree heater hose elbow that attaches to the intake manifold and provides proper clearance for the emissions canister and air cleaner housing. Correct for all Boss 302 and 428CJ engines...

Buy

$51.75
Frequently
Purchased With

Item #: 26221 [More info]
[More info] Weatherstrip Seal - Rear Deck / Trunk Lid - Repro ~ 1967 - 1970 Mercury Cougar / 1965 - 1970 Ford Mustang
Reproduction rear deck / trunk lid weatherstrip seal for the Mercury Cougar or Ford Mustang. A cheap piece that will keep water out and keep your trunk from rusting. Replaces Ford part #: C5ZZ-6543720. While you're...

Buy

$13.65
Frequently
Purchased With

Item #: 30390 [More info]
[More info] Distributor Cap - 8 Cylinder - CONCOURS - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Exact copy reproduction concourse correct distributor cap with raised Autolite logo. Good for all 67 - 73 Cougars and Mustangs. A must have for anyone building a show car.

Buy

$29.15
Frequently
Purchased With

Item #: 26575 [More info]
[More info] PCV Grommet - Steel Valve Cover - D Shaped - Repro~ 1970 Mercury Cougar / 1970 Ford Mustang
Replaces Ford part # D0OZ-6A892. For "D" shaped hole, steel valve covers. Reproduction of Ford part number D0OE-6A892-A.

Buy

$2.75
Frequently
Purchased With

Item #: 41853 [More info]
[More info] Indexing Bracket - Power Steering Hose - 390 / 427 GT-E / 428CJ - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Replaces Ford Part # : C8OZ-3C511-B

Buy

$73.55

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E2H11