All Available Parts - 1973 Mercury Cougar

Used wiring pigtail plug that runs from the taillight harness to the Driver side taillight housing and the 71 - 73 Mercury Cougar Standard or XR7

Used wiring pigtail that runs from the 14401 under dash wiring harness from the tach to the fuse block and connector (green block behind fuse box) to the under hood harness on the 71 - 73 XR7 Cougar. 

Used wiring pigtail for the taillight harness that connects to the under dash harness at the driver side kick panel for the 71 - 73 Cougar Standard or XR7. This is the red plug pigtail. We also list the white plug pigtail.

Used wiring pigtail for the taillight harness that connects to the under dash harness at the driver side kick panel for the 71 - 73 Cougar Standard or XR7. This is the white plug pigtail. We also list the red plug pigtail.

Used wiring pigtail that runs from the taillight harness to the sequential box on the 72 - 73 Cougar STD or XR7 

Used white plug under dash wiring harness pigtail for the 71 - 73 Cougar.  This pigtail runs from the under dash harness at the driver side kick panel to: Back-up wireFuel gaugePassenger turn signalPassenger side marker 

Used red plug under dash wiring harness pigtail for the 71 - 73 Cougar.  This pigtail runs from the under dash harness at the driver side kick panel to: Driver Side MarkerPassenger side markerTurn signalsequential box

Used wiring pigtail that runs from the taillight harness to the sequential unit on the 71 - 73 Cougar STD / XR7

Used wiring pigtail that runs from the under dash harness to the switch panel for the map and courtesy lights on the 71 - 73 XR7 Cougar.

Used wiring pigtail that runs from the under dash harness to the seat belt warning buzzer on the 72 - 73 XR7 Cougar.

Used wiring pigtail that runs from the 14401 under dash harness to the heater switch w/ A/C on the 71 - 73 Cougar.

Used wiring pigtail that runs from the under dash harness to the seat belt warning light on the LATE 1971 - 1973 Cougar.

Used wiring pigtail that runs from the taillight harness to the ground at the fuel filler bracket on the 71 - 73 Cougar Standard or XR7 models.

Used wiring pigtail that runs from the under dash harness to the headlight warning buzzer on the 71 - 73 Cougar.

Reproduction wiring pigtail repair kit for the sequential box on the 1969 - 1973 Cougar.  Included are: 1 five pin red connector1 five pin black connector

Reproduction BLACK lug nut fits all Legendary Series wheels. 14mm x 1.5 threadSold individually. 

Reproduction CHARCOAL lug nut cover deigned to fit the Cobra / Eleanor style Legendary LW90 wheel.  Sold as a set of 4 and includes 20 Legendary low profile lug nuts.

Reproduction 17 x 7 gold haze colored aluminum alloy rim for the 1967 - 1973 Cougar or Mustang. Designed to be a cross between the vintage A/C Cobra and the Eleanor rim. 4.25" back spacing. Bolt pattern: 5 x 4.5 NOTE* These Legendary wheels require Legendary lug nuts. NOTE: Spinner cap is not included, you can find it here. You can also purchase the lug nut cover with low profile lugs. Check out our video on Legendary Wheels below: ...

Used wiring pigtail that runs from the under dash harness to the glove box light socket on the 71 - 73 Cougar.

Used wiring pigtail that runs from the under dash harness to the Drive or Passenger side courtesy light on the 71 - 73 Cougar.

Used wiring pigtail that runs from the under dash harness from the stop lamp circuit breaker to the brake switch on the 71 - 73 Cougar.

Used wiring pigtail that runs from the under dash harness. Dual ground wire for the cigar lighter on the 71 - 73 Cougar.

Used wiring pigtail that runs from the under dash harness to the harness for the heater control panel light on the 71 - 73 Cougar. 

Used wiring pigtail that runs from the under dash harness, it's a two wire ground wire near the light switch on the 71 - 73 Cougar.

Used wiring harness that runs from the under dash harness to the glove box light switch on the 71 - 73 Cougar.

Wiring Pigtail - Under Dash Harness - Single Ground Wire - Used ~ 1971 - 1973 Mercury Cougar.

Used wiring pigtail that runs from the under dash harness to the dash courtesy lights on the 71 - 73 Cougar. This pigtail can also be used for: Cigar LighterWiper SwitchHeadlight switchGauge light

Used wiring pigtail that runs from the 14401 under dash harness to the heater switch w/ A/C on the 71 - 73 Cougar.

These emblems can be used anywhere from your toolbox, to the dash or trunk and anywhere in between. Makes a great accent to other fender emblems or door panels. Peel and stick.Sold as a pair.

Used retaining bolt with nut for the fixed column on any 70 - 73 Cougar or Mustang. 2 of these bolts are required to holt the two sections of the upper column sleeves together.  Sold individually, 2 per column.

Used wire harness with diffusers for the instrument cluster lighting (dash lights) on the Standard or XR7 71 - 73 Mercury Cougar.  NOTE* When using LED ground sensitive bulbs, you must reverse the black and blue w/red stripe wires. Ford part number D1WB-10B898-AA

The car pictured is a 67, but the copyright says "1969 Fred Bonner Corporation" and the header says Mercury Cougar introduced 1968.Measures 5"x7"

NOS Rand McNally Lincoln Mercury atlas and travel guide, originally distributed to customers through their local dealer. Includes state, city and "special maps" that include the US, Central America, Mexico and Puerto Rico. Also includes a special features section with points of interest.

NOS Autolite 4300 training handbook. Filled with details pertaining to operation, adjustments, overhaul and servicing of the Autolite 4300 carburetor which was used starting in 1967.  Volume 67 S2 L2, 9503.1, 9503.2

NOS C6 Automatic Transmission training handbook from the Ford Marketing Corporation. Course 7521, Vol. 71 S4-L2. Everything from the torque converter, to the planetary gear and hydraulic systems to diagnosis and adjustments are detailed in this manual. Everything about descriptions, testing procedures and specifications were approved by Ford. Filled with color photos and diagrams. There is an unknown name written on the inside of the cover, however all pages are intact and in perfect...

NOS 41" x 24" Walking Cat nylon banner / flag. These were hung up around dealers back in the sixties and early seventies. We're calling it a banner, but the 2 holes on one side of it indicates it may also be a flag.   NOTE* The reflectiveness of the nylon made it a bit difficult to photograph, just know that the banner is in fact white! This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually...

Custom made Walking Cat belt buckle for the Cougar die hard. This would make a great gift for anyone who lives and breathes everything Cougar. The buckle is bare, unpainted and ready for you to customize how you see fit. We're not sure how we ended up with this awesome collectable, but it's definitely one of a kind and the only one we know of, so when it's gone it's gone!  Measures 3 3/8" x 2 1/4"

Ready to move into the Cougar big time? Well now's your chance with this flashy gold plated money clip emblazoned with the XR7-G shifter emblem. A great item to add to your collection of memorabilia, or to actually use! We're not sure of it's exact origin, but we though we'd pass on the opportunity for someone to get their hands on it. Circular center measures 1-1/2" across.

Ready to move into the Cougar big time? Well now's your chance with this flashy stainless steel money clip emblazoned with a gold XR7-G shifter style emblem. A great item to add to your collection of memorabilia, or to actually use! We're not sure of it's exact origin, but we though we'd pass on the opportunity for someone to get their hands on it. Old dirty carry bag included. Measures 2" x 1" Emblem measures 1-1/4" x 1/2"

Reproduction OE spec reproduction of the two spoke steering wheel. This is the exact size and feel as the original, and has the correct factory detail Check out this video

Used fuel tank carriage bolt retainer for the 71 - 73 Cougar or Mustang. This retainer is spot welded under the car to secure the carriage bolt in place when installing your fuel tank straps. 2 required per car, sold individually.

We all love the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving potentially risky for you and your beloved classic. Holley's new RetroBright LED Modern White Headlights offer a number of advantages over traditional sealed beam headlights such as plug and play compatibility, better visibility, and 6 times longer life. Not only that, but because they are LED they take up less space, create far less heat, and use less power than other headlights....

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

This listing is for a Walking Cat keychain multi tool. We haven't been able to find much information on this, but it's definitely a cool item to add to your collection. Features a chrome plated swing out tool with a few flathead tips and nub-style phillips tips. 

Reproduction jack and tool bag for the trunk area of your Cougar or Mustang. Made in the same plaid style as the trunk mat on the outside, and a white soft liner on the inside. Measures 16 1/2" x 8 1/2"

Plastic driver side vented cowl cover for the 71 - 73 Cougar. This panel snaps into place in the opening to the cowl vent to keep debris from going in and clogging the passageway. Ford Part Number D1ZB-65018A17-AB

Plastic passenger side vented cowl cover for the 71 - 73 Cougar. This panel snaps into place in the opening to the cowl vent to keep debris from going in and clogging the passageway.  Ford Part Number D1ZB-65018A17-AB

Factory sealed NOS Cougar II "Those Famous Fords" #103 1/25 scale replica model kit from the Testors Corporation in Rockford Illinois.  When the Cougar II was first shown in 1964, the press thought it was Ford's answer to the Stingray. In reality it was a teaser to get folks excited for the release of the actual Mercury Cougar which ended up looking nothing like the Cougar II concept car. Box is slightly crushed in on one corner, but shouldn't effect the contents. ...

This is the base model Sniper II kit, does not include Power Distribution module or any other options.  The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is...

Used tune up cabinet made by Motorcraft. Dealership mechanic shops used these cabinets back in the 70's, they were used to store various tune up tools and parts. A great piece of Ford nostalgia for the serious collector to add to their shop.  Local pick up preferred but we will ship, be prepared for the costs though! Measures 33" X 12" X 19.5" and weighs a little over 44 lbs.

Made to concours standards. Replaces Ford Part # D1ZZ-6506024-A

The Mustang and Cougar have identical consoles for the 1971 - 1973 model years. This is a premium quality bezel that houses the clock and surrounds the manual or automatic shifter. They are available in black or natural finish, if you have a color other than black you will want to select "Natural Finish"(click on smaller image too see natural finish). The natural finish is actually black as well but not the "correct gloss" of black. We recommend SEM brand plastic and vinyl paint, available at...

This ashtray features correct plating, but customer reviews indicate that they are not a perfect fit and slightly different from the original, see reference photos above.  Replaces Ford part # D1ZZ-6504788-A.

MSRP: $62.50 This exact reproduction of the shifter bezel / indicator assembly that is front and center in your interior. The originals almost always started to look poor after a few decades. The 1969 - 1970 version of this shifter cover is a very nice upgrade for 1971 - 1973 owners. Replaces Ford part # D1ZZ-7D443-A Check out our video on rebuilding your shifter below: ...

Nice reproduction clear rectangular clock lens for consoles. Fits all 1971-73 Cougar and Mustang consoles. The only downside is that these lenses have a slight manufacturing flaw - there is a small crack in the hole for the clock knob (see pictures above.) Although you won't notice it unless you look closely, we prefer to be up-front about the products we sell. With that in mind, this is currently the only available reproduction lens for this application, and we think that it looks a lot...

Good used console, please call for colors as you will not be getting the one shown in this file photo. The clock and harness is usually missing and the lid will show some amount of wear. The insert will have less than perfect mylar trim but will look great for a driver. The ashtray will also be dirtier than sin. We do offer all the used parts on this console individually but often will not have the color you desire. Keep in mind that we will break these consoles up and sell you only the...

This receptacle was used on the 1967-68 rear of all consoles except the 1967 standard. It was also used in the rear interior panels of the 1971 - 1973 Cougar for both convertible and coupe. Not correct for 1969 - 1970 convertible rear side panels.Ford part number C5AZ-6230702-A.

New chrome finish screws for attaching OEM consoles. Screws fit all stock consoles 1967-73 on Mercury Cougar and Ford Mustang, most any Ford consoles actually. Phillips head oval. 1967-68 consoles use 4 attaching screws, 1969-70 consoles need 6 along the outside, 1971-73 consoles have a total of 8 screws along the outside. These are 1-1/2 inches long like the originals.

Mini console assembly, comes with ashtray receptacle, wiring and socket, and console with a casting number of D1ZB-65045B72-A. Used for automatic or manual transmissions. These came color keyed to your interior, add your desired color in the comments section of your online order. We will try to accommodate color requests where possible. We will select and ship what is available, these are easy to detail with the various vinyl paints available. These are used, and often the ashtrays will need...

Mini console or consolette ashtray, for 1971-73 Mercury Cougar or Ford Mustang. Has ball bearing rollers, and dual cigarette extinguishers. Color keyed to the console and interiors, include a desired color in the notes or comments section of your online order. We will try to find your color, easy to paint with vinyl paint.

Used grade B condition mini console assembly, comes with ash tray receptacle. Good for automatic or manual transmissions. We will select and ship what is available, these are easy to detail with the various vinyl paints available. These are used, and often the ashtrays will need bead blasting. Grade B does not come with wiring harness for the light. They will have minor damage, examples include cigarette burns or small holes or other imperfections.  These came color...

New black (set of 4) screws for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2 Check out our video on rebuilding your shifter below: ...

New black screw for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2See related items for set of 4 screws as a kit. Check out our video on rebuilding your shifter below: ...

Used ashtray for the 71 - 73 Cougar or Mustang. Customer reviews indicate that are differences between the original the reproduction, see reference photos above.  Replaces Ford part # D1ZZ-6504788-A.

Leather manual shift boot for the Classic Console Cruiser Console that we offer. Check out our video on rebuilding your shifter below: ...

Usually ships in 3-5 business days. Very nice, affordable console that is made from modern, sturdy plastic components. Often times the original consoles are very brittle after years of exposure and will crack easily. The console does not come with a clock but does have a clock delete plate included that can be modified to install gauges or a USB port.

This bumper bolt is sold individually and replaces Ford part # C4ZB-17758-A. It features the correct "button" head profile covered in stainless steel. Silver zinc with wax coating to extend plating life. Reduced shoulder height allows the nut to seat properly.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more...

Bumper bolt wavy washer sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as...

Bumper bolt nuts sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as not to...

Fits all models.

This is a Mustang kit and it includes 4 screws, 2 metal nuts, 2 self-threading plastic nuts and 2 anti-rattle bumpers as pictured.For Cougar, you need this kit plus 2 more plastic nuts, found here.

One year only driver side (left hand) bracket that attaches the beam to the frame. You will notice a big difference in quality from our Western parts that have never seen salt compared to those that have been subject to road salt. Ford called these parts isolator assembly arms. Ford part # D3WY-17C883-A.

One year only beam that is very prone to rust due to the fact that they were not painted from the factory. Mercury master part number D3WY-17A792-A, also called the front bumper reinforcement beam.

The Rocket "Strike" provides timeless and classic traditional styling at very affordable prices. The Rocket Strike is a 1-piece wheel precision crafted from A356 aluminum and topped off with a vintage style aluminum o-ring center cap. It has a lug centric design and uses standard 60-degree conical seat lug nuts (sold separately). There is 3.00 inches of hub clearance under the center cap. Load rating is 1560 lbs per wheel.4.25 Back spacingFully polished center and outer rim.  Cast...

Reproduction set of 20 lug nuts used specifically on the Rocket Racing wheels. These lugs will not work on any other wheel.

CURRENT ETA FOR THESE WHEELS IS 2/24/2023 Reproduction 17 x 7 charcoal colored aluminum alloy rim for the 1967 - 1973 Cougar or Mustang. Designed to be a cross between the vintage A/C Cobra and the Eleanor rim. 4.25" back spacing. Bolt pattern: 5 x 4.5 NOTE* These Legendary wheels require Legendary lug nuts. NOTE: Spinner cap is not included, you can find it here. You can also purchase the lug nut cover with low profile lugs. Check out our video on Legendary Wheels below: ...

Reproduction Shelby Cobra center cap for the Legendary Series wheels. This is a modern take on a classic center cap featuring the iconic cobra on a gold background.  *NOTE - These caps are specifically designed to fit the LW10 series wheels.Check out our center cap installation tips video below: ...

Reproduction Cobra GT 350 center cap for the Legendary Series wheels. This is a modern take on a classic center cap featuring the iconic blue cobra with red detail.  *NOTE - These caps are specifically designed to fit the LW10, LW30, LW50, LW66 and the LW67 series wheels.Check out our center cap installation tips video below: ...

Used wiring pigtail that runs from the under dash harness to the emergency flasher on the 71 - 73 Cougar.

Used wiring pigtail that runs from the ignition switch to the stop lamp circuit breaker on the 71 - 73 Cougar.

Used wiring harness that runs from the under dash harness to the console clock harness on the 71 - 73 Cougar.

Used wiring pigtail that runs from the taillight harness to the side marker light on either the driver or passenger side of the 72 - 73 Cougar Standard or XR7 model.

Used wiring pigtail that runs from the under dash harness to the passenger side door jamb switch on the 71 - 73 Cougar.

Open box 1973 Mercury Cougar model kit. This is a 1/25 scale replica of "The Cat" street machine featuring hood scoop, racing headers, gold cat decals, detailed interior, wide tires, detailed chassis and the choice of installing either the 428 or 439 racing engines. Even though the outer factory seal is gone, the parts are still sealed in a bag inside and all parts are still attached to the ribs. MPC # 1-0830

NOS Ford service training manual on diagnosis of charging system problems. This booklet is a guide to diagnosis of the alternator, regulator, battery and wiring issues. It contains diagnostic procedures and self instructional tests and was meant to be used as a reference guide for the "charging system videotape (video tape not included).  16 pages long with tests and answers.Issued Dec. 1974, # 365-240

Reproduction 8-32 x 1/2" stud used to attach the convertible boot mouldings on any 69-73 Cougar or 65-73 Mustang. A number of these studs were installed on the mouldings, going through the body of the car and attached underneath the sheet metal using the boot nuts.

Used wiring pigtail that runs from the under dash harness to the driver side door jamb and back to the trunk light, C pillar light and key warning switch on the 71 - 73 Cougar. NOTE: All the pigtails we have will have broken tabs.

Used wiring harness pigtail that runs from the under dash harness to connect to the driver side door jamb courtesy switch, C pillar light, trunk light and key buzzer. Red/White = door jamb switch Black/Blue = C pillar light Green/Yellow = trunk light

Used highly collectible Dan Gurney slot car racing track made by the Republic Tool and Manufacturing Corporation in Los Angeles California. Open box and lightly used. Both cars are intact, and the decals have been placed on the the vehicles and the track. Everything is good condition, but the cars have not been tested and the red car has had it's wheels painted. Other than that, this is a rare and truly great find. Features the Mercury Cougar Logo on front of the box.

Used open box 1973 Mercury Cougar 1/25 scale Customizing Model kit, MPC #1-7322-250. Designed to be built one of two ways, Stock or Street Machine version. Box is in 4/10 condition, someone has also glued the hood in place (it wasn't supposed to be glued - free opening hood - can most likely be removed with solvent). Decals are a little worse for the wear as well, and the taillight lenses are free floating (all other parts are still in plastic and mounted to the attaching...

New Old Stock. This part is located in the right front corner of the panel and has to be rotated inward to remove it from the guide rail so the panel cannot be removed. Imprinted on the plastic portion of the part is a Golde part number 100 414 645. Ford part number C8WY-65502L08-A

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

This was originally a 6 piece set for both the Convertible and Coupe. It could be ordered as a stand alone or part of the protection package which included door edge guards, bumper guards and floor mats. The door strip is the longest and can be cut to fit the fenders or quarter panels.

Used air cleaner base plug, plugs the area pre cut from the factory. Typically found on 70 - 73 Cougar and Mustang.

This plate is what is located on the backside of your door jam where your striker threads in.Fits passenger and driver sides.

These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C837-A, also called a deflector, would be painted body color.

These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C838-A, also called a deflector, would be painted body color.

D3WY-17C760-A Rubber insulator that fits along the front edge of the stone deflector. We call it an anti rattle bumper, there are a total of 6 of these used on the 1973 Cougar stone deflector. Sold individually.