All Available Parts - 1971 Mercury Cougar

Chrome tapered acorn lug nut for use with the new Legendary wheels. This 13/16" nut really only fits the Magstar style - the others have tighter clearances and you'll want to use the 3/4" nuts made for these wheels. Sold individually here, or in a complete set with valve stems. Replaces Ford Part #: C9ZZ-1012-B.Check out our video on Legendary Wheels below: ...

5-Lug Kit includes 20 chrome lug nuts and 4 chrome valve stems for installation of the new aluminum Legendary Series wheels. Tapered for correct fit. This 3/4" size is what we recommend you use with the Legendary wheels, since the clearances are too tight for 13/16" nuts. Conical Head: 3/4" Hex Thread Size: 1/2" Bolt Pattern Also available individually.Check out our video on Legendary Wheels below: ...

Correct 3/4" tapered chrome acorn lug nut for the new Legendary Wheels. These are what we recommend you use with these wheels, since the clearances are too tight for regular 13/16" lug nuts. Sold individually here, or as a complete set with valve stems.Check out our video on Legendary Wheels below: ...

5-Lug Kit includes 20 chrome tapered 13/16" lug nuts and 4 chrome valve stems. Specifically for installation of the new Legendary GT7 and 1966 Shelby wheels. Thread Size: 1/2" Bolt Pattern Check out our video on Legendary Wheels below: ...

Reproduction lug nut for the Legendary GT7 Series wheel. Sold Individually. You can find the complete lug nut installation kit here.Check out our video on Legendary Wheels below: ...

Reproduction nylon lug nut protectors. These are sold in pairs, and come with 3/4" and 13/16" sizes. Simply slide one of these sleeves into your socket and keep the chrome on your lug nuts in perfect condition!These protectors are simple plastic and are prone to breaking. Can be used on a variety of other vehicles with the same lug nut size. For the 3/4" lugs, use the sleeve with a 7/8" socket. For the 13/16" lugs, use the sleeve with a 15/16" socket. ...

These open lug nuts are commonly used on drag strip or race cars . They will accommodate the aftermarket extended studs which are prevalent in all forms of racing. Plated bright silver zinc. Extended Thread design will work on any Legendary Wheel. 3/4 hex allows plenty of room for sockets. 1/2 x 20 threads. Check out our video on Legendary Wheels below: ...

Dill 627 valve stem caps. Set of 5 caps. Same as the 1960's cars.

Dill 627 valve stem cap. Same as the 1960's cars. See related items, also sold as a set of 5 caps.

New extra long wheel stud replacement for all Mercury Cougars equipped with front drum brakes. Pretty much fits most other front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only, serrated 2-1/4" stud with correct 1/2 x 20 threads.  These are 1/4" longer in length than the stock studs, this will allow the alloy wheels, wheel spacers and aftermarket disc brakes.Replaces Ford part # C30Z-1107-A.*NOTE* You should use a press to remove and/or install the new...

Reproduction Legendary GT9 series aluminum wheel in the gloss black finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black...

Reproduction Legendary GT9 series aluminum wheel in the charcoal finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

Reproduction Legendary GT9 series aluminum wheel in the natural finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

Reproduction Legendary GT9 series aluminum wheel in the gloss black finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black...

Reproduction Legendary GT9 series aluminum wheel in the gloss black finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black...

Reproduction Legendary GT9 series aluminum wheel in the charcoal finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

Reproduction Legendary GT9 series aluminum wheel in the charcoal finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

Reproduction Legendary GT9 series aluminum wheel in the natural finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

Reproduction Legendary GT9 series aluminum wheel in the natural finish. It was inspired by the factory Shelby rim used on the 1969-70 GT350 and GT500’s. It was and still is a great looking combination of the original Torque Thrust and the iconic Magnum 500. All versions feature a gloss clear coat for protection. 4.25" Back spacing5 x 4.5" Bolt pattern These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...

D1AF-9600-FA Air cleaner base for all 1971 Cougars with the H code 351-2V engine. About 17.84" inches in diameter. Could also be found with casting number D1AF-9600-FB or D1AF-9600-FC. IMAGES BELOW ARE FOR REFERENCE ONLY, EXTRA PARTS ARE NOT INCLUDED Ford part number D1AZ-9600-F. ...

Used standard hubcap / wheel cover for the 71-73 Mercury Cougar that is grade A quality condition. The center will not be cracked or faded and will not have curb rash. Ford part # D1WY-1130-A.

Used 2-1/2" standard center cap emblem. This unit looks the same as the 1969-70 version, but is a larger diameter. Ford part # D1WY-1137-A. *TRIVIA* Applique was the industry name for this item back in 1969-70.

Used Grade B XR7 hubcap / wheel cover for the Mercury Cougar. This wheel cover was used on the xr7 and it can also be found on Ford Mavericks but with a different center medallion. Grade B will have poor paint, scratches around the perimeter and a weathered looking plastic center. If you have grade A caps like this one we are buyers.Ford part # D1WY-1130-E. This is the same cap as found on the 1973 - 1977 Ford Maverick. The Maverick has a different plastic center and carries a Ford part number...

Used dog dish style hubcap / wheel cover for the Mercury Cougar. The only application from the factory we believe this cap was used on was when ordering the 15x7" stamped steel wheel.Ford part # D1WY-1130-A.Fits:1971 Mercury CougarOEM Ford part number D1WY-1130-A ...

Used B grade dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. Used item as would have been found on 1969 Eliminators as well as other models with the plain poverty or dog dish center cap, about 7-1/2 inches in diameter. Replaces Ford part # C8OZ-1130-G, or C8MY-1130-A. Fits: 1969 Mercury Cougar Eliminator / Cyclone 1970 Mercury Cougar Eliminator / Cyclone 1971 Mercury Cougar / Cyclone 1972 Mercury Cougar 1973 Mercury Cougar 1969 Ford...

Used wire spoke hubcap / wheel cover for the 69 - 73 Cougar. These units are above average with no scratches where they have rubbed the curb, almost pitting in the center and faint, if any fading in the logo.Ford part # D0WY-1130-DFits:1969 Mercury Cougar1970 Mercury Cougar1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar ...

Used wire spoke hubcap / wheel cover for the 70 - 73 Cougar. Will have no obvious curb scratches, pits in die cast, bent spokes or cracks in plexi center. Ford part # D0WY-1130-D Fits: 1970 Mercury Cougar1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar

Used standard hubcap / wheel cover for the 71-73 Mercury Cougar that is grade B quality condition. The center will not be cracked, but may be a little faded and will possibly have minor curb rash. Ford part # D1WY-1130-A.

Reproduction dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. There are no less than three versions of this reproduction unit on the market. This one, in my opinion, is the best option. The hue is not as brilliant as the original, but a very nice cap for the fit and finish that it offers. We have trim rings available too! Check out our video on Legendary Wheels below: NOTE: These are for use on the Legendary Series Eliminator wheels Fits:...

Used Grade "A" XR7 hubcap / wheel cover for the Mercury Cougar. This wheel cover was used on the xr7 and it can also be found on Ford Mavericks but with a different center medallion. Grade A will not be perfect but will not have obvious curb rash and the center medallion will still have good color. If you have grade A caps like this one we are buyers.Ford part # D1WY-1130-E.This is the same cap as found on the 1973 - 1977 Ford Maverick. The Maverick has a different plastic center and carries a...

NOS XR7 hubcap / wheel cover for the Mercury Cougar. This wheel cover was used on the XR7 and it can also be found on Ford Mavericks but with a different center medallion. Ford part # D1WY-1130-E. The engineering number as seen on a decal on the back reads D1WA-1130-EB. This is the same cap as found on the 1973 - 1977 Ford Maverick. The Maverick has a different plastic center and carries a Ford part number of D3DA-1130-A This icon means that we're looking to buy this part!WCCC is a buyer of...

This was the inner air cleaner lid used on the Mercury Cougars equipped with a 428 Ram Air Cleaner or 429 Cobra Jet Ram Air Cleaner assembly. Although you will often find chrome under the blue engine paint on these lids they are in fact supposed to be painted from the factory. This lid is 14-1/8 inches in diameter. The reason you will often see chrome underneath the paint is that this is the same lid used on the 1967 427 GTE, 289 HiPo equipped early Mustangs and 390 GT / GTA Fairlanes and...

This lid is found on many years and cars 1968 - 1971. The diameter of the lid is just over 17 3/4", fits on 17.84" air cleaner bases. Application Mercury Cougar Ford Mustang 302 and 351 engines without ram air. Ford / Mercury have had various part numbers listed for this basic lid over the years. The primary difference was the original lids included an engine size sticker. That is why there are so many listings, the basic part number is 9661. This lid was chromed in several applications,...

A nice reproduction of the standard air cleaner wing nut. This version was used on most Ford products through the 1980's.

Round ring shaped gasket that goes on top of the carburetor. Protects and seals the carburetor to the air cleaner.

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. * This filter fits primarily Big Block cars, but a couple of other combinations, so grab a tape measure and double check the height of the one you need to replace, as that will tell you which one you need. Air Filter Height (Inches) : 2.193" Air Filter Height (mm) : 55.7 mm  Air Filter Bottom I.D. (Inches) : 11.32" Air Filter Bottom I.D. (mm) : 287.53 mm Air Filter...

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. Please note that the Ford Service Replacement specs for this filter (Service Replacement # D7AF9601AA) are; Type: 67; Inside: 13.000; Outside: 11.200; Height: 2.795. All reproductions that we have found follow these specs, making the filter 1/8" taller than the original filters. These filters will function properly, but the lid will not seat properly. ACTUAL FILTER SPECS: Air Filter Height (Inches) : 2.822...

Correct dimensions, good fit. Will show minor cracks in rubber but will not affect performance and cannot be seen when installed. Replacement air cleaner for the 1967 - 1973 Mercury Cougar Walking Cat Oval Air Cleaner, as well as other Ford oval air cleaners.

These filters feature the correct color of filter paper and an red/orange molded face. In addition, they have the correct "round hole" design on the outer shell. Fits Mustang 1965-67 K code HiPo 289 and 1968 Mercury Cougar GT-E W code 427-4V engines, that were originally equipped with the chrome high performance air filter assemblies. Please note: this filter will NOT fit a standard Ford air cleaner Replaces Ford Part #: B7SZ-9601-A. ...

Replacement air filter for the 1967 - 1973 Mercury Cougar 14" 'Cal Custom' Aluminum Finned Air Cleaner Assembly.

 The USA-630 is continuing to evolve in Custom Autosound’s quest for the perfect classic car radio. This radio has large OEM style push-buttons that give a perfect look in a classic dash. Although it looks classic it has the latest modern features that include an iPod doc. Navigation for the iPOD includes artist/song/album/playlist all from the buttons on the radio. A great feature so you can keep the iPod hidden away in your glove box or console. The USB input is still there on the back...

Mercury Cougar AM-8 track Motorola manufactured radio. May or may not work and wiring plugs may be cut. Good radio for reconditioning, often times the 8 track feature only needs a drive belt. Ford part # D1WA-19A242. *NOTE* Does not include brackets or knobs. Are you going to install this unit yourself? The first issue of Legendary Cougar Magazine has a great how to article that will help you in your journey to musical bliss. You can get it here! ...

Used functional AM-8 track Motorola manufactured radio. These will work and all wiring plugs will be present. Good working and tested radio, fresh installed 8 track belt, may have minor cosmetic issues from a past life. *NOTE* Does not include brackets or knobs. Ford part # D1WA-19A242. Are you going to install this unit yourself? The first issue of Legendary Cougar Magazine has a great how to article that will help you in your journey to musical bliss. You can get it here! ...

Used non functional Mercury Cougar AM/FM stereo that was originally manufactured by the Bendix company. Identified with small sized font "COUGAR" on the face plate. By 1971 FM stations were becoming common place and we start seeing a much higher percentage of Cougars equipped with AM/FM radios. This unit may have partial function, but most likely will not work. Knobs sold separately. Ford part # D1WA-19A241. Are you going to install this unit yourself? The first issue of Legendary Cougar...

Fragile black plastic channel selection button that often gets broken. Requires advanced skills to remove and replace.

AM/FM RDS tuner with 25 presetsLCD display shows song / artist300 watts peak 2-Ohm stable7 LCD color choicesDimmer controlClock or function displayBluetooth and remote microphone includedUSB portDirect CD-I controlFront and rear auxiliary inputAlpha numeric display for MP3 / WMA / FLAC / WAVElectronic tuning and volume control and last volume memoryBass, mid, treble and tone controlloudness compensation for low volume listeningDSP EQFront / rear faderLeft / right balanceDigital clockHi volt 4...

Used set of four nuts and two locking washers used on the knob shafts of all radios 1967 - 1973 used on Cougars, Mustangs, Galaxie, Torino etc.

The Cougar radio bezel at first glance looks much like the Mustang radio bezel. It does in fact carry a Cougar part number and has a slightly different shape to it. The most noticeable difference is the fifth screw hole at the top middle, Mustang does not have this hole. Keep in mind the AM-8 track used the same bezel but with an enlarged hole.This enlargement was done at the factory prior to plating and if you look at the back side you will see the cut line. This is a B grade bezel that has...

These anti static devices were installed under the front bearing dust caps on cars equipped with factory installed AM-FM radios. The part pictured is NOS, the one we currently have in stock is used. Sold individually.

Good used detail item that is often missing and is also correct for Mustang. Copper grounding strap. We have noticed that 1971 cars typically have a hex head screw, and the 1972-73 straps were attached with a hex head screw.

C6OA-18832-A is the number stamped into the end of the Autolite capacitor. Attaches to one of the lugs on the voltage regulator, bullet lead plugs into wiring harness. Sometimes called a radio ignition interference suppressor. About 1-15/16" inches long. This is one of those small detail items that judges like. Application all Ford and Mercury vehicles from 1966-1971 used this "Autolite" marked capacitor when a radio was installed by the factory.. Starting in 1972 there is a Motorcraft version...

Correct plug for your 1967 - 1973 Mercury Cougar or Ford Mustang. Often these have been cut from the main loom to install an after market radio.

Reproduction radio plug and pigtail for your 1967 - 1971 Mercury Cougar or Ford Mustangs.

Correct plug for your 67-71 AM- FM radio, or 8-track... Often these have been cut from the main loom to install an after market radio.The 1972 model used the same plug, but the wires are not in the same spots, go figure! These are speaker wires not power wires.The color codes are:  White right cowl speaker.   Orange left cowl speaker. Speaker blue / black ground. Power "not this listing." Blue / red stripe, radio light. Yellow / black stripe, power in for radio. ...

If after installing a new stereo system you experience unwanted motor whine or engine noise, check all grounds on radio, amp, etc. If you still have the noise, this filter may help.Instructions included.

Used driver side, front drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the A pillar front piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim parts...

Used passenger side, front drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the A pillar front piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim...

Used driver side, top drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the horizontal piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim parts get...

Used passenger side, top drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the horizontal piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim parts...

Used passenger side, rear XR7 drip rail moulding for any 1971-73 Mercury Cougar XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly...

Used driver side, rear XR7 drip rail moulding for any 1971-73 Mercury Cougar XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core...

Used passenger side, rear Standard model drip rail moulding for any 1971-73 Mercury Cougar NON-XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and...

Used driver side, rear Standard model drip rail moulding for any 1971-73 Mercury Cougar NON-XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and...

If you do not have cores that are worthy of restoration, give us a call prior to ordering, we can help! This trim set includes all the window and door moulding / trim for a hardtop 71-73 Cougar. As shown you will get all six trim parts that surround the door glass and quarter windows, all four rear window trim parts and both "L" shaped trim parts that surround the windshield. The difference between the Standard and XR7 sets are the quarter mouldings are smaller on the Standard version,...

Restored driver side, rear XR7 drip rail moulding for any 1971-73 Mercury Cougar XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Correctly anodized to give the polished stainless steel look. Very prone to scratches and dents.  Ford part number D1WY-6551729-B or D1WB-6551621-AE.

Restored passenger side, rear XR7 drip rail moulding for any 1971-73 Mercury Cougar XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Correctly anodized to give the polished stainless steel look. Very prone to scratches and dents. Ford part number D1WY-6551728-B or D1WB-6551620-AE.

Restored driver side, rear Standard model drip rail moulding for any 1971-73 Mercury Cougar NON-XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Correctly anodized to give the polished stainless steel look. Very prone to scratches and dents. Ford part number D1WY-6551729-A or D1WB-6551621-BC.

Restored passenger side, rear Standard model drip rail moulding for any 1971-73 Mercury Cougar NON-XR-7 hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the rear quarter window piece by itself. Correctly anodized to give the polished stainless steel look. Very prone to scratches and dents.  Ford part number D1WY-6551728-A or D1WB-6551620-BC.

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the small passenger side rear, about 6-7 inches in overall length. Ford casting number D1WB-65550416-AE. Ford part number D1WY-65423A18-C. No core charge required. 

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the small driver side rear, about 6-7 inches in overall length. Ford casting number D1WB-65550416-AA part number D1WY-65423A19-C.  No core charge required. 

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the horizontal passenger side, about 38 inches in overall length. Ford part number D1WY-65423A18-C. No core charge required. 

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the horizontal driver side, about 38 inches in overall length. Ford part number D1WY-65423A19-C. No core charge required. 

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the larger curved rear passenger side, about 47 inches in overall length. Ford part number D1WY-655517A36. No core charge required. 

Used vinyl top moulding from any 1971-73 Mercury Cougar. This is the larger curved rear driver side, about 47 inches in overall length. Ford part number D1WY-655517A37. No core charge required. 

New Old Stock vinyl top moulding from any 1971-73 Mercury Cougar. This is the small driver side rear, about 6-7 inches in overall length. Ford casting number D1WB-65550416-AA part number D1WY-65423A19-C.   

1967-68 XR7 over head console pad clip. Two needed per car. Sold individually # C3AB-63519A16

NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes, will not lineup with factory holes) they can be made to fit your 1971 - 1973 Mercury Cougar.

NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications they can be made to fit your 1971 - 1973 Mercury Cougar.

NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes) they can be made to fit your 1971 - 1973 Mercury Cougar.

NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes) they can be made to fit your 1971 - 1973 Mercury Cougar.

Front driver side wheel lip moulding. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself.*Note - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC. Why do we require cores be sent...

Rear passenger side wheel lip moulding. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images...

Front passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images to enlarge. ...

Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself.Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images to enlarge. ...

This set of four wheel lip moldings is sold on an exchange basis. We would require your cores be in hand before we ship restored mouldings. If you have extra cores you would like to sell then we would like to hear from you! Please do not send heavily damaged trim parts as the finished product will be delicately thin. Extra screw holes and elongated holes are OK but you will be getting a like product in exchange. We are happy to send your cores in for restoration and make sure you get your...

Front driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores.

Front passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores. Do you have questions about your cores trim pieces? This video should help! ...

Rear driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores. ...

Rear passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores.

Restored four piece aluminum rear window moulding / trim set correctly restored with an anodized and a bright dip finish and polished to a very high luster.Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.

Good used four piece aluminum rear window moulding / trim set with some dings and or minor scratches. Ready to install on your Cougar as is, or polish them to be installed on a daily driver. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. Ford part #s D1ZZ-6542405-A driver side (left hand) lower, D1ZZ-6542404-A passenger side (right hand) lower, D1ZZ-6542430-A passenger side upper, and D1ZZ-6542431-A...

Our used passenger (right hand) side upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.

Our used passenger (right hand) side lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542404-A.

Our used driver (left hand) upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A. ...

Our used driver (left hand) lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.

Our core passenger (right hand) upper rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542430-A.

Our core driver (left hand) upper rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542431-A.

Our core passenger (right hand) lower rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542404-A.

Our core driver (left hand) lower rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542405-A.

Our core aluminum rear window mouldings / trim will have scratches and dings and are suitable for restoration. This kit consists of one driver side (left hand) upper, one passenger side (right hand) upper, one driver side lower, and one passenger side lower core window moulding / trim. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. We will not send you kinked or gouged trim as it is not feasible to...