Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

1967 - 1973 Mercury Cougar Body Parts including sheet metal, brackets, fender extensions and other parts found on the body of your Cougar can be found here. Need help? Call 503-463-1130


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1009-1056 of 1659
$0 Price: $495.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31698 -

Used convertible rear seat structure cut from a 69 - 70 Cougar Convertible parts car. This will not fit a Mustang due to the differences in the wheel houses and transition panel. Keep in mind that this is an oversized item and cannot ship through any conventional means. Truck freight and crating fees will apply. 

$0 Price: $9.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32041 -

Used seat belt anchor plate that has been cut out from a car in our salvage yard. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like the 1967-73 cars. We have noticed that the last generation 1971-73 Cougars had 4 round shaped plates in the rear floors. Same threads, all work the same. These were pretty much used on all Ford cars starting in...

$0 Price: $13.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32042 -

Used seat belt anchor plate that has been cut out from a car in our salvage yard. Must be welded to floor pan. 4 total per car, all 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped for the front seat belts inboard on 1971-73 cars. Round anchor bracket with factory welded nut for added strength. See related items for good used seat belt anchor plates if you have concours needs. Replaces Ford Part # D1AZ-6561216-A. ...

$0 Price: $265.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15842 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15844 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15846 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15843 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15845 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Out of Stock
Item #: 15848 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $164.88

Buy Details

Availability: Out of Stock
Item #: 15847 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 32147 -

This seat riser / platform is specific to Mustang, but if you're "vertically challenged"....you may want to go ahead and use this part on your Cougar. It'll raise your seat up enough so that you don't have to use phone books anymore!

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 32148 -

This seat riser / platform is specific to Mustang, but if you're "vertically challenged"....you may want to go ahead and use this part on your Cougar. It'll raise your seat up enough so that you don't have to use phone books anymore!

$0 Price: $59.85

Buy Details

Availability: In-Stock Item
Item #: 30719 -

Reproduction shock support for the 67 - 68 Cougar. This support sits underneath the transition hump and attaches the upper mounts of each rear shock. The shock hardware is accessible through two access holes on the hump.

$0 Price: $450.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33569 -

Used upper shock mount cross member for Q code 351CJ and 351C-4V Cougars from 1972-73. We think. Probably includes 4 speed cars too from 1971. Bracket appears to be slightly different than the Mustang version of the same generation. Pretty rare bracket, likely needed the competition handling package option, with the 351C-4V engines. Basic Ford part number is 18A000. This is the rear upper shock cross member, designed for staggered rear shocks. Notice the missing hole for the passenger...

$0 Price: $144.00

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11682 -

If you buy this reproduction tower, you will no doubt save you time in clean up. But nothing will ever fit and look like original FoMoCo towers!Here's a little film to help you fortify your flexxy feline!

$0 Price: $178.07

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19390 -

This tower is technically incorrect for a 1969-70 Mercury Cougar as it has no reinforcement plate. Cougar owners would definitely want to buy a good used tower instead of this reproduction. Keep in mind all Cougars came with reinforced towers in 1969-70 just as all 1969-70 Cougars came with the 9" rear-end and 351 or larger engine.Here's a little film to help you fortify your flexxy feline! ...

$0 Price: $151.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23446 -

Excellent condition tower as cut from a Western parts car. No specific part number for this structural front suspension section.Generic Ford part # C7ZZ-16055-D or E, includes apron and side member.Here's a little film to help you fortify your flexxy feline! ...

$0 Price: $195.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19391 -

This is the best upgrade tower for your Cougar or Mustang that does not have the factory reinforcement plate. 1969 features the largest plate of all years 1968-70 and will fit perfectly without modification into any year 1967-70. If both of your towers are cracked this is a no brainer, if only one of your towers are cracked then it would look out of place to have one tower that is reinforced and one that was not. No specific part number for this structural front suspension section. For 1970,...

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19563 -

1970 features a reinforcement plate that is a combination of a 1968 and 1969 plate. This is an excellent upgrade for any 67-70 Cougar or Mustang without reinforced shock towers. This is a 100% clean, uncut tower worthy of any show-car. No specific part number for this structural front suspension section. For 1970, the plate size was shortened, for easier access for spark plug changes. Generic Ford part # D0ZZ-16055-B, included apron and side member. ...

$0 Price: $204.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19668 -

Used driver side (left side) shock tower that is in excellent condition as cut from a Western parts car. For Mercury Cougar and Ford mustang with no specific part number for this structural front suspension section. Generic part # D1ZZ-16055-A, includes apron and side member.

$0 Price: $178.07

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11681 -

We highly suggest you look at our mint condition used towers for about the same price. Why mess around with repo when you can get FoMoCo?!Here's a little film to help you fortify your flexxy feline!

$0 Price: $178.07

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19433 -

We highly suggest you look at our mint condition used towers for about the same price. This tower is technically incorrect for a 1969-70 Mercury Cougar as it has no reinforcement plate. Cougar owners would definitely want to buy a good used tower instead of this reproduction. Keep in mind all Cougars came with reinforced towers in 1969-70 just as all 1969-70 Cougars came with the 9" rear-end. All Cougars also came with 351 or larger engines for those years as well, except for the 302...

$0 Price: $136.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23480 -

Excellent condition tower as cut from a Western parts car. If you are replacing two towers because of cracks, we strongly suggest upgrading to a 1969-70 pair of reinforced towers. The 69 and 70 towers are an exact fit into your 1967-68 Ford Mustang or Mercury Cougar. There are no specific part numbers for this structural front suspension section.Generic Ford part #s C7ZZ-16054-C or C7ZZ-16054-E, includes apron and side member. Here's a little film to help you fortify your flexxy feline! ...

$0 Price: $195.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19434 -

This is the best upgrade tower for your Mustang or Cougar that does not have the factory reinforcement plate. 1969 features the largest plate of all years 1968-70 and will fit perfectly without modification into any year 1967-70. If both of your towers are cracked this is a no brainer, if only one of your towers are cracked then it would look out of place to have one tower that is reinforced and one that was not. No specific part number for this structural front suspension section. For...

$0 Price: $164.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19581 -

1970 features a reinforcement plate that is a combination of a 1968 and 1969 plate. This is an excellent upgrade for any 67-70 Cougar or Mustang without reinforced shock towers. This is a 100% clean, uncut tower worthy of any show-car. No specific part number for this structural front suspension section. For 1970, the plate size was shortened, for easier access for spark plug changes. Generic Ford part # D0ZZ-16054-A, included apron and side member. ...

$0 Price: $204.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19692 -

Used passenger side (right hand) shock tower in excellent condition as cut from a Western parts car. No specific part number for this structural front suspension section. Generic Ford part # D1ZZ-16054-A, includes apron and side member.

$0 Price: $552.35

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 23487 -

Reproduction shock tower and apron assembly  for your Cat or Pony.Here's a little film to help you fortify your flexxy feline!

$0 Price: $603.16

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 23644 -

Reproduction driver side (left hand) shock tower and apron assembly for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $495.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 17775 -

Used driver side shock tower and apron assembly for the Mercury Cougar or Ford Mustang.Here's our little film to help you fortify your flexxy feline!

$0 Price: $490.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23730 -

1971-73 shock towers are not reproduced and finding rust free Western aprons is getting to be a challenge. This is a great value for those needing multiple parts and want factory spot welds. Generic Ford part # D1ZZ-16055-A, includes apron and side member.

$0 Price: $603.16

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 23542 -

Reproduction passenger side shock tower and apron assembly for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $583.09

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 23645 -

Reproduction passenger side (right hand) shock tower and apron assembly for Mercury Cougar or Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $545.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23543 -

Used passenger side shock tower and apron assembly for the Mercury Cougar and Ford Mustang.Here's our little film to help you fortify your flexxy feline!

$0 Price: $490.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23731 -

1971-73 shock towers are not reproduced and finding rust free Western aprons is getting to be a challenge. This is a great value for those needing multiple parts and want factory spot welds. Generic Ford part # D1ZZ-16054-A, includes apron and side member.

$0 Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24823 -

Solid, undamaged, used driver side (left hand) shock tower brace for Mercury Cougar and Ford Mustangs. Consider our brace kits for the best bang for your buck! Ford part # C9ZZ-16A053-A. *NOTE* Excludes 1969-70 Boss 429.Here's our little film to help you fortify your flexxy feline!

$0 Price: $33.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25414 -

Solid, used, and undamaged driver side (left hand) shock tower brace for Mercury Cougar and Ford Mustangs. Consider our brace kits for the best bang for your hard earned buck! Ford part # D1ZZ-16A053-A.

$0 Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24822 -

Solid, used, and undamaged passenger side (right hand) shock tower brace for Mercury Cougar and Ford Mustang. Consider our brace kits for the best bang for your hard earned buck! Ford part # C9ZZ-16A052-A. *NOTE* Excludes 1969-70 Boss 429.

$0 Price: $33.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25413 -

Solid, used, and undamaged passenger side (right hand) shock tower brace for Mercury Cougar and Ford Mustangs. Consider our brace kits for the best bang for your hard earned buck!Ford part # D1ZZ-16A052-A.

$0 Price: $21.69

Buy Details

Availability: In-Stock Item
Item #: 41090 -

Reproduction shock tower brace nuts and bolts for Mercury Cougar and Ford Mustang.Here's our little film to help you fortify your flexxy feline!

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19331 -

Used, solid, and undamaged shock tower braces for all 1969-70 Mercury Cougar and most Ford Mustangs. Includes 4 used 7/16"-14 x 1-1/4 inch cowl attaching bolts. Ford part #s C9ZZ-16A053-A driver side (left hand), C9ZZ-16A052-A passenger side (right hand).  *NOTE* Excludes 1969-70 Boss 429. **Installation Tip** These brackets attach 'under' the cowl lip. Here's our little film to help you fortify your flexxy feline! ...

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 26878 -

Pair of reproduction firewall to shock tower braces for the Mercury Cougar. These are good quality reproductions that are already painted black so the only thing you need to do is bolt them on.Replaces Ford part #'s C7ZZ-16A053 driver side (left hand), C7ZZ-16A052 passenger side (right hand).

$0 Price: $89.09

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 25895 -

Pair of reproduction shock tower braces that connect the shock towers to the firewall. Sold in a pair. Not even close to being as good as our used original FoMoCo units. Replaces Ford part # D1ZZ-16A052-A & D1ZZ-16A053-A.

$0 Price: $43.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19001 -

Solid, undamaged driver and passenger side shock tower braces. Fits all 1967-68 Mercury Cougar and Ford Mustang. Ford part #s C5ZZ-16A053-B driver side (left hand) and C5ZZ-16A052-C passenger side (right hand). *NOTE* Excludes 1967-68 Mustang Convertible. **Installation Tip** These brackets attach under the cowl lip. ...

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19637 -

Solid, used, and undamaged driver and passenger side shock tower braces for Mercury Cougar and most Ford Mustangs. We recommend going with a pair of these used braces, as compared to the reproductions we offer. Our Braces are going to be a better fit all around, and the quality is far better than the repros.Ford part #s D1ZZ-16A053-A driver side (left hand), D1ZZ-16A052-A passenger side (right hand). *Installation Tip* These brackets attach 'under' the cowl lip. ...

$0 Price: $38.18

Buy Details

Availability: In-Stock Item
Item #: 33844 -

This kit contains fasteners are duplicates of the originals as defined within the factory manuals.

$0 Price: $21.69

Buy Details

Availability: In-Stock Item
Item #: 41299 -

Shock tower coil spring cover installation hardware that fits Cougar and Mustang coupe, fastback and convertible.

$0 Price: $86.85

Buy Details

Availability: In-Stock Item
Item #: 41638 -

These are exact replacements for the 1964-68 Ford Mustang, but looks similar to the pans for the 1967-68 Mercury Cougar. These floor pans will also fit the 1969-73 Mustang, but the will requires modification to fit properly. 1969-70 cars have different ribbing configurations and 1971-73 cars can use these also. This is a heavy gauged stamped steel floor pan *NOTE* This floor pan has the outside lip bent up which is proper for coupes. Convertibles were bent down. You can either bend it up or...