Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13909 -
High quality alternative to the expensive OEM switch. If you have an early 67 the plug may be the dual type which is also listed on this site. This will work with your C-4 or C-6 automatic transmission. The only real difference is that this switch does not come with the FoMoCo logo or part number on it. Replaces Ford Part #: C9ZZ-7A247-B, SW 877
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 18652 -
Tested and inspected neutral safety switch for the C-6 transmission installed in early 1967 Mercury Cougar and Ford Mustangs. Found on cars before build date 12/15/1966. This neutral safety switch is identified by having two plugs that plug into the single 4 pin plug, coming from the firewall.Look for a transmission code of U on your door data plate. If your car has a code W, your original transmission was an C-4 and uses a different neutral safety switch.Replaces Ford Part #: C6AZ-7A247-A, SW...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 16-0016 -
Used C-4 transmission tail shaft or housing extension as Ford called them in the Master Parts Catalog. Fits all 1967-68 Mercury Cougar and 1967-69 Ford Mustang cars with transmission code W on the door tag. Cast aluminum construction, the 1968 Cougar version will have the provision for mounting the damper weight on the bottom. Replaces Ford part number C6DP-7A040-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14-0035 -
New blue removable strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14-0027 -
New red permanent strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 27465 -
Clip for mounting the throttle linkage rod rod to the carburetor and mounts C-4 or C-6 throttle cables to the throttle bell cranks.Replaces Ford part number C2VY-9826-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15317 -
Nice quality hardware for attaching the shift rods to the bottom of the shifter mechanism. Won't work with the 1970-73 Hurst shifters, but does work with all of the others. Including 3 speeds, sorry, sold in packages of 3 though. Check out our video on rebuilding your shifter below: ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33195 -
Rebuilt C4 24 spline torque converter for the 1967 - 68 Mercury Cougar or 1966 - 69 Ford Mustang. This item carries a $200 core charge, refundable when we receive your rebuildable core. Ford part number C6AZ-7902-M. What does it mean to ārebuildā a torque converter? When there are problems with a carās automatic transmission, sometimes itās the torque converter. It could be fluid loss, bent vanes, or bad bearings among other problems. We have a local shop with decades of...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33686 -
Rebuilt small block C6 Ford transmission torque converter for the 1971-73 Mercury Cougar and Ford and Mustang. 31 splines and 1.375" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. Fits small block C6 transmissions, typical for 351C engines and others when equipped with "U" code transmission and H, or M code engines 1971-73. Has 11.5 inch circle diameter for the flex plate studs, Ford part number D1AZ-7902-A....
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33196 -
Rebuilt C6 FE Engine torque converter for the 1967 - 70 Mercury Cougar and 1966-70 Ford and Mustang. 31 splines and 1.848" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. 1966-70 Ford FE engines include: 352, 360, 390, 427, 428, etc. Ford part number C8OZ-7902-A. What does it mean to ārebuildā a torque converter? When there are problems with a carās automatic transmission, sometimes itās the torque converter. It...
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 12146 -
This kit is an easy way to covert your 289 / 302 / 351W engine from a C4 or C6 transmission to an Automatic Overdrive Transmission. Kit includes: Cross memberTrans Mount InsulatorSlip YokeKick Down CableFlex Plate AOD Shift Linkage This is just the kit, and does not include the full transmission!
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 11275 -
Core C4 transmission for a 1967 Mercury Cougar or Ford Mustang. Tag number PEE-C. Floor shift C4 Transmission.Core transmission only, No bell housing, dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1967 Mercury Cougar. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 22666 -
Core C6 transmission for a 1967 Mercury Cougar or Ford Mustang. Tag number PGA-P or PGA-P1. Floor shift C6 Transmission. Core transmission only, NO dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1967 Mercury Cougar with 390 engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 19872 -
Reproduction transmission cooling lines made of OE steel for the Mercury Cougar or Ford Mustang equipped with a V-8 engine and the C-6 automatic transmission. These lines are sold in pairs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14291 -
Fits all applications for both automatic and manual transmissions, big block and small block. Will also work with your Tremac / T-5. Replaces Ford part # C4DZ-6068-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 27552 -
New manufactured transmission oil pan for the Ford C6 transmission as found on 1967-73 Cougar and Mustangs, big block and small block engines. Very high quality heavy gauge steel.Replaces Ford part number C6AZ-7A194-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14561 -
An exact copy with a beautiful chrome mirror finish. 1 inch deeper than stock.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14562 -
An Exact copy. Natural gray paint for correct look and rust prevention. 1 inch deeper than stock.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 42041 -
Flawless chrome plating, available in stock depth only. Includes drain plug.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14226 -
An Exact copy. Natural gray paint for correct look and rust prevention.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 42046 -
Flawless chrome plating, available in stock depth only. Includes drain plug.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 31742 -
New manufactured transmission slip yoke for either C-4 automatic transmission or small block manual 3 or 4 speed manual transmissions. Ford 1965-1973. 28 splines and 1-1/16" U-joint caps.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 10520 -
New manufactured transmission yoke for a T-5 5 speed transmission.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 30097 -
Used transmission support for 67 - 70 Cougars and Mustangs. We strongly recommend that you buy this used support as compared to the reproductions. The repros we offer are inferior to the originals, and to be honest, they simply do not fit as well.
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 33298 -
New manufactured Tremec T-5z World Class Transmission. Same transmission as installed in Fox Body Mustangs. This is the common transmission for conversions that does not involve extensive modifications to 1967-73 Mercury Cougar or Ford Mustang. Small block Ford V-8 engines only, 289 / 302 / 351W and 351C. Brand new transmission, no core required. 1 year warranty, with recommended synthetic ATF. Flush and fill after first 500 miles, 30,000 miles there after. Bare transmission as shown, no...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 16-0100 -
Used tube with a tapered end for the vacuum modulator on 1967-68 Mercury Cougar or Ford Mustang with drum brakes and C4 or automatic transmission, but without power drums or power disc brakes. With power brakes the vacuum hose was connected to a fitting in the intake manifold. Pictured in the Bob Mannel Ford Small Block V8 on page 7-26. The basic Ford part number is 7B094.*Note - this tube is not used with disc brakes.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 19172 -
Small Block V8 with C4 Vacuum line for 1967 - 1969 Mercury Cougar / Ford Mustang
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 19173 -
Small Block V8 with C4 Vacuum line for 1967 - 1969 Mercury Cougar / Ford Mustang
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 33301 -
Core C-6 Transmission valve body for any 1967-68 Mercury Cougar or 1967-68 Ford Mustang with code "U" transmission code on the door tag. This is only for 1967 through 1968 transmissions with P-R-N-D-2-1 shift pattern. Sold as a core, should be thoroughly cleaned and rebuilt with quality parts. These units can be upgraded with 'shift kits' to firm up shifts, add longevity, and they help reduce and eliminate clutch and band slippage. Various kits available in the aftermarket, we offer one as...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 10660 -
Reproduction washer for the interlock on all top loader 4 speed transmissions as found on 1967-69 Mercury Cougar and Ford Mustangs.Ford part number C5ZZ-7C318-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26101 -
A nice reproduction of the standard air cleaner wing nut. This version was used on most Ford products through the 1980's.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11771 -
Anti rattle spring for the 1967 Cougar and Mustang clutch release lever spring. Ford part number C6AZ-7562-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 15305 -
Reproduction engine side stud for the clutch equalizer bar or z-bar that fits a 289, 302, 351W, or 351C engines in the 67-70 Cougar or Mustang.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 10490 -
Ford called this part a 'sleeve'. Attaches to the lower shifter arm with a hitch pin. Has nice bushing, with correct nut, washer, and pin. The 1967/68 and 1969/73 versions are identical. The C1AA-7353-C sleeve has fine threads, the C9OZ-7353-A has course threads. Fits all 1967-73 Mercury Cougar and Ford Mustang, and we suspect many other Ford vehicles beginning in 1961. This fine thread version is hard to keep in stock, consider the 1969-73 course thread version as an alternative. Check out...
B
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 31333 -
C5OP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1967 - 1968 Mercury Cougar with any 289 or 302 engine and automatic C4 transmission, code W on your door tag. 1967 - 1972 Ford Mustang with 250, 289, or 302 engine and automatic C4 transmission, code W on your door data plate. Fits the 157 tooth flex plates. There was a 164 tooth flex plate that came later. NOTE * Grade B bell housing will have a chip or heavy scarring on the bottom, see photo...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 23857 -
This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 16-0068 -
Manual transmissions, include both 3 and 4 speed Top Loader transmissions. Ford part number C6OZ-6392-B. The latest research shows that the casting number C60A-6394-B bellhousing may have been for 1966-68 Cougar, Mustang, Fairlanes and Comets with an 11 inch clutch disc. Shipped bare, no hardware or clutch fork.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 24309 -
Very rare find... A restored bezel will look fine but will never retain the sharp edges and matte black finish like this new in the box original Ford part.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 30548 -
Pair (2) Bolts for securing the inspection cover for any C-4 automatic transmission 1967-68 Mercury Cougar or 1965-70 Ford Mustang. Additionally also fits FMX transmissions 1969-73 Mercury Cougar.or Ford Mustang.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 30883 -
4 Bolts for securing the inspection cover for any C-6 automatic transmission 1967-70 Mercury Cougar or Ford Mustang.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 30964 -
Set of new bolts for attaching the floor shift bucket to the hump in the floor board, 1/4-20 bolts with washer head and 3/8 inch hex head. Sold as a set of 4 bolts. Fits all 1967 - 1973 Mercury Cougar and Ford Mustangs, and likely all of other floor shift Ford products from this time period. Check out our video on rebuilding your shifter below: ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 19093 -
Good used setup as taken from a parts car. Will have good bushings in the hanger and show average wear is all the normal places. We will not send you worn out junk...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 32778 -
(7526) Nylon plastic injected. New Old Stock. Protects clutch equalizer and rod, and removes excess play. These are to put on either end of your clutch pedal rod. Sold individually. If your going to do both ends you will need to order 2 of these. Replaces Ford Part #: C0AZ-7526-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25237 -
D0ZZ-7528-C Equalizer bar or "Z" bar for FE big block engines with a manual transmission. Both 3 and 4 speed manual transmissions. This is a used part and it will most likely show some wear form previous use.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 24304 -
C7ZZ-7515-D Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12 inches long. Cougar 1967 through 2-15-1968. 390-4V engines only, XR7, XR7-G. Mustang 1967 through 2-15-1968. 390-4V only, GT. Mustang 1967. K code 289 HiPo 4 speed only. GT
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 32757 -
Manual transmission clutch kit for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is a 10 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.