Contact Us / Visit Us (click here)
Office/Warehouse Closed Jan 1, 2025.
International Customers Click Here [Updated 1/2025]
 

Search This Category:
Select layout:
Products 2161-2208 of 3524
Repair Kit - Self Adjuster - Drum Brake - Passenger Side - 10 Inch - Repro
0
$0 Price: $25.02
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41437 -

Reproduction passenger (driver hand) side drum brake self adjuster repair kit for your Mercury Cougar or Ford Mustang. This kit contains all the parts necessary to refurbish the self adjusting mechanism on drum brakes. Includes new cable and guide, ratchet, spring, and all necessary small parts. Kits include everything for one wheel.

Repair Stud - Windshield / Rear Window - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 12127 -

Every now and again, the studs that hold the rear moulding begin to rust and break away from the body of the car. No need to install your rear window trim with missing studs and clips......just screw one of these little guys into place and Viola! Problem solved. Sold Individually. #4-24 X 3/8" 7/32" Head Diameter Phillips Flat Head If you were missing every stud on your windows, you would need: 67 - 68 = 22 front, 20 rear 69 - 70 = 13 front, 24 rear 71 - 73 = 16 front, 18 rear Here's a handy...

Resistance Wire from Tachometer - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $55.89
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27586 -

Used tachometer resistance wire for all 1971-73 Mercury Cougar XR7's and those that wish to add a factory tachometer to your standard instrument cluster. This wiring segment was removed from the main under dash harness of a 1971-73 Mercury Cougar XR7. No wires to splice. This wiring segment includes the plug to the tachometer, lead to the fuse block, and to pins, one goes to the ignition switch, the other goes to the 'thru the firewalll plug'.

Resistor - 3 Speed Heater Switch without A/C - Used
0
$0 Price: $44.87
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0383 -

Used OEM Ford heater blower motor resistor that attaches to the heater blower fiberglass housing. We inspect these for damage or broken wires and we guarantee these will make your fan work. Not only was this heat resistor was factory installed on 1969-73 Cougars and Mustangs, but also on 1968 and newer Fairlanes, Torinos, Rancheros, Cyclones, and Montegos. Also installed on 1970 and newer Mavericks / Comets, plus 1971 and newer Lincolns.Ford part # C8OZ-18591-A.*Note - Excludes Heater with...

Resistor - Heater Switch to Blower Motor - with A/C - Repro
0
$0 Price: $29.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10524 -

New heater blower motor resistor that attaches to the heater blower fiberglass housing. Ford part # C8OZ-18591-A.1970 and Later Maverick and Comet1971 and Later Lincoln

Resistor - Heater Switch to Blower Motor with A/C - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $44.87
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0056 -

Used OEM Ford heater blower motor resistor for cars with factory installed air conditioning, it attaches to the A/C blower fiberglass housing. Fits all 1969-73 Mercury Cougar and Ford Mustang with integral or factory air conditioning. The reproduction resistor that fits the 1967 - 1968 Cougar and 1965-1968 Mustang has a different hole pattern. According to manufacturer information (INDAK), the OHM output for this switch makes it incompatible with the earlier reproduction resistor. We inspect...

Retainer - Ashtray - Rear Interior Panel - Grade A - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $86.27
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32950 -

This ashtray lid was located on the rear interior quarter panels and was used on all 1971-73 Mercury Cougars and Mustangs. This ashtray differs from other ashtrays you will see on various Ford products in that it has a brushed finish, is stamped steel and a slightly shorter lower base section. The removable ash receptacle is sold separately. Priced as good quality grade A units, no pitting.Ford part # D1ZZ-6530714-A.

Retainer - Ashtray - Rear Interior Panel - Grade B - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $45.77
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10174 -

This ashtray lid was located on the rear interior quarter panels and was used on all 1971-73 Mercury Cougars and Mustangs. This ashtray differs from other ashtrays you will see on various Ford products in that it has a brushed finish, is stamped steel and a slightly shorter lower base section. The removable ash receptacle is sold separately. Priced as driver quality grade B units, will have light pitting or scratches as shown.Ford part # D1ZZ-6530714-A. ...

Retainer - Bolt-In Door Glass - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $8.87
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0202 -

This is the round metal threaded disc that attaches the D0ZZ-6523258-A bushing to the door glass brackets. About 1-3/4" in diameter, two each per door glass on a 1970. 1971-73 Mercury Cougar and Ford Mustang use 3 of these for retaining the door channel bracket. Ford part number 384289-S.Click on images to enlarge. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy...

Retainer - Brake Pad - Repro
0
$0 Price: $1.75
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41130 -

Replaces Ford Part # C8AZ-2066-A Sold individually

Retainer - Convertible Top Cylinder Pin / Door Window T-Bolt - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10475 -

Keeper or retainer for attaching the convertible top cylinder pins. These are usually broken when replacing convertible top cylinders. One retainer per side.Ford Part # 372552-S These are not a exact replica of the t-bolt retainer, but will work for a replacement for the retainer on the T-bolt on the door windows (T-bolt Ford Part # C8SZ-6523274-A).  Ford part number for the retainer is C7SZ-65234A28-A.

Retainer - Door Hinge Pin - EACH - New
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 17294 -

Retainer or keeper for door hinge pins on all 1968-73 Mercury Cougar and Ford Mustang, plus most all other Ford products with a typical door hinge pin. The factory installed the hinges with the pins driven in from the bottom as viewed with the doors installed. Most restorations install the pins from the top so that gravity holds them in. These retainers allow the pins to be mounted concours correctly. You must use a socket or other tool to install. These fit the door hinge pins with 5/16 inch...

Retainer - Headlight Switch Retainer - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $11.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12449 -

Used steel rear retaining bracket for the headlight switch on any 1971-73 Mercury Cougar or Ford Mustang. These are bare steel and will have a bit of flash rust as shown, nothing serious. Replaces Ford part number D1ZB-13B107-AC.

Retainer - Leaf Spring Mounting Box - Size 6 - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $38.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21607 -

Used rear leaf spring retainer for 1968 -73 Mercury Cougar with standard or non-GT / non- competition handling suspensions. Additionally it fits most 1966-70 Mercury Comet / Montego, 1970-71 Ford Torino. Identified with a stamped number "6" on the top. The inside height is 1-3/4 inches. Sold individually, one for each side for a total of 2 per car. Bead blasted for pictures, most will ship 'as removed'. This suspension part never came painted, there will be some erosion due to...

Retainer - PCV Elbow to Air Cleaner Base - Used
Other 1971 - 1973 Ford / Lincoln / Mercury
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $5.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25279 -

Original retainer that clips onto the breather element nipple sticking through the air cleaner base and holds the elbow for the hose going to the PCV valve.  Ford calls this part the Crankcase Emissions Filter Retainer.The Master Parts Catalog says this part is only for 1971 and newer cars, but this part has been found on low mile 1970 cars as well. Ford part # D1AZ-9E628-A.

Retainer - Rear Brake Drum - EACH - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 31096 -

Push on retainer for rear drum brakes. 2 or 3 of these were used to hold the rear brake drums onto the rear axle assembly during construction of your 1967-73 Mercury Cougar or 1965 - 73 Ford Mustang. While not necessary, these are a neat concours item. Sold individually.  Ford part number 372188-S

Retainer - Steering Column Bracket for Wiring Harness - EARLY - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $9.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33448 -

Used wiring harness retainer bracket for mounting the steering column bracket, on most 1971 Mercury Cougar or Ford Mustang before June 25, 1971. Retainer only, many of these are missing. Probably not missed, limited to stock on hand. There was another variation used after 6/25/71. Not sure if there was a clean switch on the steering column bracket assembly at the start of 1972. We suspect not. Ford part number D1AZ-14A163-A.

Retainer - Steering Column Bracket for Wiring Harness - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $9.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33449 -

Used wiring harness retainer bracket for mounting the steering column bracket, on any 1971 Mercury Cougar or Ford Mustang after June 25, 1971. Retainer only, many of these are missing. Probably not missed, limited to stock on hand. There was another variation used prior to 6/25/71. Not sure if there was a clean switch on the steering column bracket assembly at the start of 1972. We suspect not.Ford part number D1AZ-14A163-L.  ...

Retainer - Steering Column Bracket for Wiring Harness - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $14.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33447 -

Used wiring harness retainer bracket for mounting the steering column bracket, on any 1973 Mercury Cougar or Ford Mustang. Retainer only, many of these are missing. Probably not missed, limited to stock on hand. Basic Ford part number 14A163.

Retainer - Steering Column Tube - Tilt Column - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $9.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0117 -

Used steering column tube retainer for the Mercury Cougar or Ford Mustang equipped with the tilt steering column. These little units help hold the steering column together and there are 3 required per column. Sold individually. Ford part # C8SZ-3499-A. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Retainer - Wiper Switch and Lighter Rear Retainer - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $13.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13079 -

Used steel rear retaining bracket for the windshield wiper switch and cigar lighter on any 1971-73 Mercury Cougar or Ford Mustang. These are bare steel and will have a bit of flash rust as shown, nothing serious. Replaces Ford part number D1ZB-17C584-AC.

Retainer And Gasket - Lower Ball Joint - Repro
0
$0 Price: $13.65
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11298 -

Reproduction lower ball joint retainer and gasket. Works on 67 - 73 Cougars and Mustangs.

Retainer Clip - Door Latch Rod - Repro
0
$0 Price: $0.90
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41928 -

Plastic insert with metal locking retainer. Replaces Ford part # C5AZ-6221952-A. NOTE* This clip will need to be squeezed on the clip side in order to obtain a good grip. Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers shown can be typed in to the search bar on our site. (Click image to view full size) ...

Retainer Clip - Door Latch Rod - Used
0
$0 Price: $2.88
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0323 -

Plastic insert with metal locking retainer. The plastic came in various colors, white, red, and black are common. Replaces Ford part # C5AZ-6221952-A.Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers shown can be typed in to the search bar on our site. (Click image to view full size) ...

Retainer Clip - Emergency / Parking Brake Retainer - Set of 3 - Repro
0
$0 Price: $1.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41495 -

Reproduction emergency / parking brake retainer clip set for the Mercury Cougar or Ford Mustang. These units are sold in a set of 3.

Retainer Clip - Lock Cylinder - Door / Rear Deck / Trunk Lid - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $2.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0445 -

Used door lock and trunk lock cylinder retainer clip. Not exactly the same as the door lock clips. Trunk clips have the small hole, a hooked tool would be used for removal. Not used on 1967 - 1968 Cougar trunk lock cylinders. *Note - For use on Cougar trunk locks built prior to 3-1-1972. Please see Ford part number D2WY-6243629-A for your Cougar needs on cars built after 3-1-1972 (used only).

Retainer Clip - Split Shaft - Fixed / Tilt Column - Used
Will fit any 1967 - 1978 Cougar or Mustang steering column 0
$0 Price: $34.88
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 15-0179 -

Used retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. Ford part number C9AZ-3E629-B. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Retainer Clips - Split Shaft - Fixed / Tilt Column - PAIR - Repro
1974 - 1978 Cougar / Mustang 0
$0 Price: $36.45
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 32067 -

Reproduction 3D printed retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. These installs on the upper piece of what Ford called the Steering Column Shaft Assembly, also known as the inner steering column collapsible shaft.  The Steering Column Shaft Assembly is the 2 piece shaft that connects the steering wheel to the rag joint. The upper...

Retainer Pins - Heater Resistor - PAIR - Repro
0
$0 Price: $1.70
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10479 -

Reproduction heater resistor attaching pins correct for 1967-68 Mercury Cougar and Ford Mustang, but works fine with 1969-73 cars too. Sold in sets of 2 pins.

Retaining Bolt w/ Nut - Fixed Column - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $7.07
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32921 -

Used retaining bolt with nut for the fixed column on any 70 - 73 Cougar or Mustang. 2 of these bolts are required to holt the two sections of the upper column sleeves together.  Sold individually, 2 per column.

Retaining Clip - Power Steering Hose - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $31.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27347 -

This used retaining clip was originally used to connect the two power steering hoses together at the power steering box. Used on all 1971-73 Mercury Cougar and Ford Mustang with power steering and V8 engines. Ford shows this item in the chassis assembly manuals and it is called a hose retaining clip, and the Ford part number is D1ZA-3E506-AC.

Retaining Clip - Sun Roof Drive Cable - Used
0
$0 Price: $49.86
Online Only Price

Details

Availability: Out of Stock
Item #: 30609 -

Spring steel clip located under the drive cable housing as seen on page 16, figure 19 of our free download of the sunroof panel service procedure manual.

Retaining Clip Rail - Sun Roof Headlining Panel - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $169.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30480 -

This strip has a series of seven retaining clips that hold the headlining panel to the roof panels as seen on page 14 of the sun roof manual.

Retaining Clip Rail - Sun Roof Headlining Panel - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $169.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32915 -

This strip has a series of five retaining clips that hold the headlining panel to the roof panels as seen on page 14 of the sun roof manual.This is for the 1971-73 Mercury Cougar with factory sunroof. Sunroof measurements are roughly 19-1/2 x 39 inches. This panel is 32-1/4 inches long with 5 clips as shown.

Retaining Nut - Fresh Air Vent Cable - Driver Side - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $0.99
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0077 -

Used mounting nut for the driver side fresh air vent cable on all 1971-73 Mercury Cougars without air conditioning. This nut screws onto the cable.  7/16-14  hex nut with 11/16" hex. (Sold separately)*Hint this is an easy to find hardware store nut, nothing else special about it.Replaces Ford part number 34670-S.

Retaining Nut - Side View Mirror - Remote - Repro
0
$0 Price: $29.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26150 -

Great reproduction of a rather hard to find part.

Retaining Nut - Side View Mirror - Remote - STAINLESS - Repro
0
$0 Price: $29.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 31671 -

This mirror nut for the 70 - 73 Cougar or Mustang is made from stainless steel, as compared to the other reproduction we offer which is made from die cast metal. A few benefits of the stainless steel nut is that the finish on it will not tarnish over time, and that it cannot be cross threaded.

Retaining Nut Washer - Side View Mirror - Remote - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $11.57
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20192 -

This fits behind the door panel and is needed to install your remote mirror correctly.*NOTE*1969 Cougar owners do not need this part as it is built in the the chromed plastic, rectangular bezel on the door panel.

Retaining Ring - Fuel Sending Unit - Repro
0
$0 Price: $3.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14205 -

Replaces Ford part #C0AZ-9A307-B.

Retaining Ring - Fuel Sending Unit - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $4.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23791 -

Good used ring with only surface rust and no obvious gouges.

Retaining Ring - Fuel Sending Unit - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $5.27
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32439 -

Used retaining ring for the fuel sending unit or vent on 1971 and newer tanks. Fits a little tighter than the reproduction rings. Ford part #C0AZ-9A307-B.

Retracting Spring - Automatic Transmission Kick Down - Repro
0
$0 Price: $7.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14046 -

Automatic transmission kickdown control retracting spring. 1971-73 Mercury Cougar and full sized Ford/Mercury, mid sized Ford/Mercury, Ford Mustang, Maverick/Comet, and Thunderbird/Lincolns. V8 engines only. Replaces Ford Part #: D1AZ-7B146-A

Retracting Spring - Lower Clutch Release Lever - 1971 Late and Newer - Repro
0
$0 Price: $8.65
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26130 -

Made from original Ford blue prints to exact specifications of originals. Painted green as original.

Retrobright Headlight - LED - Modern White - New
0
$0 Price: $215.22
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33546 -

We all love the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving potentially risky for you and your beloved classic. Holley's new RetroBright LED Modern White Headlights offer a number of advantages over traditional sealed beam headlights such as plug and play compatibility, better visibility, and 6 times longer life. Not only that, but because they are LED they take up less space, create far less heat, and use less power than other headlights....

Return Hose - w/o Air - Passenger Side - Repro
0
$0 Price: $34.53
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14076 -

Power Steering Hose Manufactured in the U.S.A. Low pressure return hose.  Replaces Ford Part # d1zz-3a713-a Click this link for more clarity on power steering hoses: https://secure.cougarpartscata...

Return Spring - Tilt Column - Used
Works on any 70 - 78 Cougar or Mustang Tilt Column. 0
$0 Price: $22.86
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 15-0173 -

Used return spring for any 1970 - 1978 Cougar or Mustang Tilt Column. This spring provides return tension on tilt steering wheels.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

Ring Gear - 164 Tooth - 302 / 351 - Repro
$0 Price: $31.63
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33163 -

Reproduction ring gear for 164 tooth fly wheels and flex plates as found on 1968-73 Mercury Cougar and Ford and Mustang. Quality new ring gear, check Youtube for installation instructions. 

Riv-Nut Installation Tool - Side View Mirror - New
0
MSRP:$4.99
$4.99 Price: $0.95
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10665 -

We have created all of the components needed to economically install the steel nutsert or Riv-nut for the exterior mirrors that mount to the car doors. Our steel Riv-nut uses a 1/4 inch hole. You will need a 5/32 Allen or hex key, 3/8 inch wrench, and a 7/16 inch wrench. The Riv-nut needs to be assembled on the kit as shown prior to installation. The assembly is installed flush, in the pre-drilled hole. The Allen wrench and the 7/16 are held stationary, while the 3/8 wrench is used to tighten...

United StatesClose
Flag of United States
Powered by
duty and tax information for United States