Contact Us / Visit Us (click here)
Office/Warehouse Closed Jan 1, 2025.
International Customers Click Here [Updated 1/2025]
 

Search This Category:
Select layout:
Products 2353-2400 of 2533
Manual Transmission - 4 Speed - 429CJ - Used
$0 Price: $2,375.01
Online Only Price

Details

Availability: Out of Stock
Item #: 25698 -

Original equipment 4 speed top loader transmission from a 1971 Mercury Cougar with engine code J 429 Cobra Jet and engine code C 429 Cobra Jet. Transmission code 6 on the door tag, this would be a close ratio 4 speed transmission with a 2.32 ratio first gear. The tailshaft on this transmission has a different bolt pattern for the Hurst shifter plate.Ford part # D0ZZ-7003-H, Ford casting # RUG-AZ1.

Master Cylinder - Disc - Bendix 2227161 - NOS
0
$0 Price: $109.15
Online Only Price

Details

Availability: Out of Stock
Item #: 32846 -

New old stock Bendix master cylinder for 1968-69 Mercury Cougar and Ford Mustang with factory power disc brakes. This is a Bendix manufactured MC with proper 2227161 number and stop bolt on the bottom. Also has the dimple forward of the front brake line.  Includes a new cap with diaphragm as shown. The cap is not assembly line correct as this is a service replacement part.*Note even though this is a brand new unit, it should be tested for leaks prior to installation. Things happen when...

Modulator - Vacuum - C4 / C6 - NOS
0
$0 Price: $65.85
Online Only Price

Details

Availability: Out of Stock
Item #: 33140 -

New Old Stock Ford C4 or C6 transmission modulator valve for 1967-73 Mercury Cougar or 1965-73 Ford and Mustang. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs. Ford part number C4AZ-7A377-B.

Motor Mount - Big Block / FE Engine - NOS
0
$0 Price: $90.85
Online Only Price

Details

Availability: Out of Stock
Item #: 33475 -

NOS big block motor mount. Left is the same as right, sold individually. This isolator is used with the 390, 427, 428 and 429 Cobra Jet engines.  Sold individually. Ford Part #: D1ZZ-6038-A.

Moulding / Trim - Hood - Rear - Used
$0 Price: $74.88
Online Only Price HOLD FOR CORE

Details

Availability: Out of Stock
Item #: 25415 -

Anodized aluminum snap on moulding for the rear edge of the hoods on early 1971 Mercury Cougar XR7 coupe and XR7 convertible models. Same moulding available optionally on 1971 Mustangs too. Available only up until 2-1-1971. Made from anodized aluminum, subject to very minor nicks and scratches from prior use, will still have a shine to it, good for driver quality use. Sold on an exchange basis only, must have core sent to us prior to us sending this piece out. Also available restored, but only...

Moulding / Trim - Interior - Windshield Pillar Post - Coupe - Passenger Side - Used
$0 Price: $129.85
Online Only Price

Details

Availability: Out of Stock
Item #: 27328 -

This passenger side (right hand) moulding is correct for hardtop or coupe. On convertibles, the top portion is trimmed to allow it to slide under the sun visor bracket. Convertibles show the same casting numbers on the part, but are a modified before assembly. We do have factory cut convertible mouldings both early and late. Ford part # D1ZZ-6503598, engineering # imprinted on the back D1ZB-6503598 for 1971-72, D3ZB-6503599 for 1973. *NOTE* Excludes Mustang Fastback and Mach 1 models. This...

Moulding / Trim - Pillar Post - Coupe - Driver Side - Used
$0 Price: $134.85
Online Only Price

Details

Availability: Out of Stock
Item #: 25392 -

This driver side moulding is correct for hardtop or coupe. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket. The engineering number imprinted on the back is D1ZB-6503599 for 1971-1972 and D3ZB-6503599 for 1973. Convertibles show the same casting numbers on the part, but are a modified before assembly. We do have factory cut convertible mouldings both early and late. Master part number D1ZZ-6503599.*NOTE* - Excludes Mustang Fastback and Mach 1 models. ...

Moulding / Trim - Throttle Pedal - STAINLESS STEEL - Used
$0 Price: $19.89
Online Only Price

Details

Availability: Out of Stock
Item #: 25481 -

Stainless steel throttle pedal surround trim. Self attaching to part number D1ZZ-9735-B. This used part may have some wear, but will not have broken tabs. Fine steel wool really shines these up. It appears that this trim may not have been used all the way through 1973. Ford probably eliminated it as a cost saving measure.

Moulding / Trim - Windshield Header - Interior - Convertible - Used
$0 Price: $189.86
Online Only Price

Details

Availability: Out of Stock
Item #: 25468 -

This is the "Chrome" trim across the top of the windshield on the inside. This piece will need to be sandblasted and repainted. Many people have chromed these, but because of Federal safety regulations from the factory they were painted satin silver.Ford Part Number: D1ZZ-7603606-A.

Mounting Bolt - Spare Tire - Hold Down Mount - Hook Type J-Bolt - CONVERTIBLE - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $24.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25406 -

1971 - 1973 Convertible spare tire mounting, J bolt. MPC lists the total length as 9-1/2 inches long, and 5 inches threaded. Application is for hubcap type wheels only, those of you fortunate to have the style steel wheels need C8OZ-1448-A above.

Mounting Bracket - A/C Compressor Pedestal - 351W - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $89.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15158 -

Cast iron pedestal mount for the air conditioning compressor on all 1970 Mercury Cougars and Ford Mustangs with the 351W H code 2V engine. Ford also used this bracket on other 1970-71 Ford passenger cars with 351W engines only.Ford casting number D0AA-2882-E.

Mounting Bracket - Throttle Cable - 429CJ - Used
$0 Price: $61.88
Online Only Price

Details

Availability: Out of Stock
Item #: 25274 -

Bracket mounts to top of intake manifold, holding the throttle cable. *Note - Used after 3/15/1971.

Mounting Bracket - Throttle Cable - 429CJ - Used
$0 Price: $94.86
Online Only Price

Details

Availability: Out of Stock
Item #: 25478 -

Bracket mounts to top of intake manifold, holding the throttle cable. *Note - Used prior to 3/15/1971.

Mounting Plate - Sway Bar - Rear - EACH - Used
0
$0 Price: $41.27
Online Only Price

Details

Availability: Out of Stock
Item #: 16185 -

Used mounting bracket. This is the mounting plate for the end links on the factory rear sway bar. The tab for the end links are mounted forward of the rear axle towards the outside of the car. These plates are mounted with the shock mounting plates on your rear axle assembly. Sold individually and you will need two for the installation. Left is the same as right. Replaces Ford part number D0ZZ-5A775-A.NOTE: These are only a few of these in stock, and they will have moderate pitting.Mustang...

Mounting Spacer - Alternator Bracket - Used
$0 Price: $32.85
Online Only Price

Details

Availability: Out of Stock
Item #: 24466 -

Aluminum spacer for the alternator mounting bracket on 1971 Mercury Cougar and Ford Mustang with 429 Cobra Jet engines. Also fits 1970-71 Cyclone and Torino with 429CJ engines. Spacer measures approximately 2-7/8 inches long. Fits between the engine and alternator mounting bracket.

Nodular Case Third Member - Square N - Ford 9 Inch Rear - Used
0
$0 Price: $325.00
Online Only Price

Details

Availability: Out of Stock
Item #: 33666 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found in 1973 and newer Ford products, mostly F100 and Bronco.  These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available: There are other versions of the Nodular iron third members. Non-"N", lazy "N", and square "N" this version. See related items.  Please have your desired date in mind when calling or place it in...

Nodular Case Third Member - with Soft N - Ford 9 Inch Rear - Used
0
$0 Price: $399.87
Online Only Price

Details

Availability: Out of Stock
Item #: 30530 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found on cars with 427-4V, 428CJ, 429CJ, Boss 302, Boss 351, or Boss 429. These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available:There are other versions of the Nodular iron third members. Non-"N", lazy "N" like this one, and square "N". See related items.  Please have your desired date in mind when calling or place it in...

Nodular Case Third Member - without N - Ford 9 Inch Rear - Used
0
$0 Price: $399.87
Online Only Price

Details

Availability: Out of Stock
Item #: 33665 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found on 1968-69 Mercury Cougar and Ford Mustang with 427-4V, 428CJ, Boss 429, and Boss 302. These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available: There are other versions of the Nodular iron third members. Non-"N" this version, lazy "N", and square "N". See related items.  Please have your desired date in...

Nut - Dash Pad - Used
$0 Price: $1.26
Online Only Price

Details

Availability: Out of Stock
Item #: 27503 -

Dash pad attaching nut 8-32 threads original zinc plate and dichromate. 5 of these nuts are used to attach the dash pad to the painted steel upper dash panel  (D1ZZ-65044D90-A) on 1971-73 Mercury Cougar and Ford Mustangs. Sold individually.Replaces Ford part number 45271-S36.

Nuts and Washers - Radio Installation Kit - Used
Torino, Galaxie 0
$0 Price: $10.89
Online Only Price

Details

Availability: Out of Stock
Item #: 31349 -

Used set of four nuts and two locking washers used on the knob shafts of all radios 1967 - 1973 used on Cougars, Mustangs, Galaxie, Torino etc.

Oil Cap - Push On - CHROME - Closed Emissions - NEW
0
$0 Price: $8.45
Online Only Price

Details

Availability: Out of Stock, On Order
Item #: 13862 -

Brightens the engine compartment and looks sharp. Fits our big block finned aluminum valve covers (item# 26018) and others with the round push-in style opening. Requires a rubber grommet to fit into the valve cover, which is usually included with new valve covers.Does NOT fit valve covers with the "stovepipe" fitting (like our small block finned aluminum units) or factory valve covers the tabs for twist-on oil caps. This cap is for after market valve covers.

Oil Dipstick - 429CJ - Used
$0 Price: $195.89
Online Only Price

Details

Availability: Out of Stock
Item #: 27360 -

Chromed engine oil dipstick as found on all 1971 Mercury Cougar and Ford Mustang with 429CJ engines (C or J Code). Top of the shield to the dip stick is 16.23 inches. The handles were chromed originally. Ford part # D0OZ-6750-B, Ford casting # D0OE-6750-B.*NOTE* This is not the same dipstick as found on garden variety 429 and 460 engines.

Oil Filter - Autolite - Repro
0
$35.00 Price: $36.36
Online Only Price

Details

Availability: Out of Stock
Item #: 15281 -

This oil filter is absolutely concours correct. A must for Show. All are silk-screened with multiple colors.

Oil Filter - Motorcraft - Repro
0
$10.00 Price: $10.05
Online Only Price

Details

Availability: Out of Stock
Item #: 42048 -

The oil filter made by the original Ford supplier.

Oil PIckup Tube and Screen Assembly - 351C - Used
0
$0 Price: $30.00
Online Only Price

Details

Availability: Out of Stock
Item #: 33551 -

Used oil screen pick up tube assembly from a 1970-74 small block 335 series, or 351C or Cleveland Ford car. This is for front sump oil pans. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item. Replaces Ford Part #: D1AZ-6622-A

Paint - ORR-LAC Chassis - Black - Repro
0
$0 Price: $9.75
Online Only Price

Details

Availability: Out of Stock
Item #: 14-0092 -

WE CAN NOT SHIP THIS PRODUCT INTERNATIONALLY WITHOUT SHIPPING IT AS HAZARDOUS MATERIAL. THIS WILL INCUR HAZARDOUS MATERIAL CHARGES VIA UPS AND SOME COUNTRIES DO NOT ACCEPT IMPORTING THIS PRODUCT. This ORR LAC chassis black paint will give the appearance of an expensive, baked on finish. Also usable on other tools, equipment, vehicle frames, shop racks, trailers and more. ORR-LAC 923 Semi Gloss black.

Pan Gasket - Cork - C4 Transmission - Repro
1969 Fairlanes and Torinos 0
$0 Price: $3.95
Online Only Price

Details

Availability: Out of Stock
Item #: 33179 -

Replacement cork pan gasket for all 1965-73 C4 Ford transmissions. 

Pan Gasket - Rubber - C4 Transmission - Repro
1969 Fairlanes and Torinos 0
$0 Price: $7.71
Online Only Price

Details

Availability: Out of Stock, On Order
Item #: 33180 -

Replacement rubber material pan gasket for all 1965-73 C4 Ford transmissions. 

Pin - Anchor Guide - Brake Shoe - Used
0
$0 Price: $3.33
Online Only Price

Details

Availability: Out of Stock, On Order
Item #: 12474 -

Used brake shoe guide plate, or anchor pin, that holds the top of the drum brake shoes together on your Mercury Cougar or Ford Mustang equipped with drum brakes. For the money our reproduction plate is a better value and cleaner, too. These have 1/2 inch holes in them.Replaces Ford part number C4UZ-2028-A.

Pinion Yoke - 8 Inch Ring Gear - Used
0
$0 Price: $110.00
Online Only Price

Details

Availability: Out of Stock
Item #: 30048 -

Used pinion yoke for an 8 inch rear end on any 1967-68 Mercury Cougar or 1967-73 Ford Mustang. 25 splines Ford says it is for a 1260 U-Joint. Part cleaned for pictures, used parts shipped the way they come off of the cars. Shipped bare, no hardware included.Ford part number C3OZ-4851-A.

Pinion Yoke - 9 Inch Ring Gear - Used
0
$0 Price: $138.00
Online Only Price

Details

Availability: Out of Stock
Item #: 30532 -

Used pinion yoke for an 9 inch rear end on any 1967-73 Mercury Cougar or 1967-73 Ford Mustang. 1310 U-Joint. Part cleaned for pictures, used parts shipped the way they come off of the cars. Shipped bare, no hardware included. Ford part number C3AZ-4851-L.

Pitman Arm - Manual Steering - Used
$0 Price: $165.87
Online Only Price

Details

Availability: Out of Stock
Item #: 25386 -

D1ZA-3B153-AA 1971 - 1973 Manual steering pitman arm. May also have casting number D3ZA-3B153-AB. Ford part number D1ZZ-3590-A.

Pitman Arm - Power Steering - Repro
$0 Price: $105.55
Online Only Price

Details

Availability: Out of Stock, On Order
Item #: 30128 -

This reproduction pitman arm equipped on 71 - 73 Cougars and Mustangs with factory power steering. Heavy-duty cast construction. Includes a new castle nut, cotter pin and zerk fitting. Replaces Ford part number D1ZZ-3590-B.

Power Seat Back Release Linkage w/ Hardware - Center Release - Used
0
$0 Price: $49.86
Online Only Price

Details

Availability: Out of Stock
Item #: 31677 -

This is for seats designed for the center release, if your chrome T handle release knob is mounted on the side of the upper portion of your bucket seat this will not work on your application. Side release linkage can be found here.

Power Steering Gear Box - CONSTANT - Used
$0 Price: $99.86
Online Only Price $90 Core Charge

Details

Availability: Out of Stock
Item #: 11860 -

This is the 'constant ratio' power steering box, Saginaw manufactured. Tag number SPA-S, and sometimes could also be SPA-U. This is the standard power steering box for all Cougars 1971 1972 1973. We offer used boxes because in our experiences this box design is very durable and not prone to wear like the early style dry steering boxes.

Power Steering Gear Box - VARIABLE - Used
$0 Price: $369.86
Online Only Price

Details

Availability: Out of Stock
Item #: 11861 -

This is the 'variable ratio' power steering box, Saginaw manufactured. The Variable Ratio steering box was part of the Competition Suspension Package available optionally on all Cougars or part of the GT or 351CJ Performance Group. This Variable Ratio steering box should have come standard with all 1971 - 1973 M or Q code 351-4V or C or J code 429-CJ equipped Cougars. Sometimes this tag number could also be SPA-V. We offer used boxes because in our experiences this box design is very...

Power Steering Pump - for ALL - 289 / 302 / 351W / 351C - EXCEPT 1970 - Rebuilt
0
$0 Price: $74.88
Online Only Price $30 Core Charge

Details

Availability: Out of Stock
Item #: 10582 -

This item will have a refundable core charge added to your order. Multi-year power steering pump, 1967-69, and 1971-73, excludes 1970. When fully assembled you will notice that this year P/S pump has a centered fitting for the pressure hose on the back of the reservoir. Most factory 1970 Mercury Cougar and Ford Mustang have an offset fitting. The only 1970 exception is the R or Q code 428 Cobra Jet engines, they used this pump. Manufacurers note: In place of the paper gaskets, it is...

Power Window Motor - Mounting Bracket - Driver Side - Used
$0 Price: $11.88
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0200 -

D1ZZ-6523313-A Bracket that attaches the end of the power window motor to the door on the driver side of 1971-73 Cougar and Mustangs with power windows.

Power Window Motor - Mounting Bracket - Passenger Side - Used
$0 Price: $11.88
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0201 -

D1ZZ-6523312-A Bracket that attaches the end of the power window motor to the door on the passenger side of 1971-73 Cougar and Mustangs with power windows.

Pull Cable - Fresh Air Vent - Passenger Side - Grade A - Used
0
$0 Price: $45.86
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0073 -

"A" grade used cable and knob assembly for opening the passenger side fresh air vent on 1971-73 Mercury Cougar and Ford Mustangs without air conditioning. Cable control mounts under the dash below the glove box. Cougar uses a different mounting bracket than the Mustang. Hard to find them without broken mounting tabs. About 23 inches in total length.Replaces Ford part number D1ZA-6501890-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73...

Pull Cable - Fresh Air Vent - Passenger Side - Grade B - Used
0
$0 Price: $26.87
Online Only Price

Details

Availability: Out of Stock
Item #: 11-0086 -

"B" grade used cable and knob assembly for opening the passenger side fresh air vent on 1971-73 Mercury Cougar and Ford Mustangs without air conditioning. Cable control mounts under the dash below the glove box. Cougar uses a different mounting bracket than the Mustang. B grade will have a broken mounting tab, but will otherwise have a good cable. About 23 inches in total length.Replaces Ford part number D1ZA-6501890-A.

Pulley - Alternator - 429CJ - Single Sheave - Used
$0 Price: $33.89
Online Only Price

Details

Availability: Out of Stock
Item #: 25400 -

Good used single sheave pulley for the alternator on the 429 Cobra Jet.Ford Part #: D1ZF-10A352-AA.

Pulley - Alternator - Repro
0
$0 Price: $42.05
Online Only Price

Details

Availability: Out of Stock
Item #: 11033 -

Reproduction alternator pulley, two sheave. Fits 1967-73 Mercury Cougar and 1965-73 Ford Mustang and most all other 1965-73 Ford vehicles.

Pulley - Alternator - Single Sheave - C9AF-10A352-A - Used
$0 Price: $20.88
Online Only Price

Details

Availability: Out of Stock
Item #: 24567 -

C9AF-10A352-A or -B Alternator pulley for use with only one drive belt. Just under 2-3/4" inches in diameter. This later version would have a casting number of C9AF-10A352-A or possibly C9AF-10A352-B stamped on it. Ford master part number is C5AZ-10344-K like the above pulley.

Pulley - Crankshaft - 429CJ - Triple Sheave - D0OE-6312-J - Used
$0 Price: $255.87
Online Only Price

Details

Availability: Out of Stock
Item #: 25043 -

D0OE-6312-J 1971 429 Cobra Jet Crankshaft Pulley - Used Application for 429CJ engines with air conditioning. Triple sheave pulley, 6-1/4", 7-1/16", and 7-5/32" in diameter. Ford Master Part number D0OZ-6A312-H. There is reference that this pulley could also have a casting number of D0OE-6312-J.

Pulley - Crankshaft - Double Sheave - 429CJ - D0OE-6312-F - Used
$0 Price: $255.87
Online Only Price

Details

Availability: Out of Stock
Item #: 25042 -

D0OE-6312-F 1971 429 CJ engines without air conditioning. Double sheave pulley, 6-1/4" and 7.00" in diameter. Ford Master Part number D0OZ-6A312-G.

Pulley - Crankshaft - Triple Sheave - 351C / W - D0OE-6312-C - Used
$0 Price: $174.89
Online Only Price

Details

Availability: Out of Stock
Item #: 25041 -

D0OE-6312-C For both Cleveland and Windsor 351 engines. This is also the "with air conditioning" pulley, but with power steering option. Triple sheave 8.00", 7-55/64", 6-9/16" diameters. A four bolt hole crank shaft pulley for use with 1970 and upward crank dampeners. Ford Master Part number D0OZ-6A312-B. This is a Service Replacement pulley for D0AE-6312-C. *Excludes 1972 Q code 351 Cobra Jet engines. This means all 1972 351C-4V engines.

Pulley - Water Pump - 351 / BOSS 302 - C9OE-8509-E - Used
$0 Price: $125.85
Online Only Price

Details

Availability: Out of Stock
Item #: 24596 -

Single sheave pulley 6-61/64 inches in diameter.Applications:1970 Boss 302 Eliminators without power steering1970 351 engines without power steering1971 - 1973 351 engines without power steering and without A/C.Ford casting number C9OE-8509-E. Ford part number C9OZ-8905-B *Note - this is a very shallow pulley, it is meant to run in the second belt position from the engine. ...

United StatesClose
Flag of United States
Powered by
duty and tax information for United States