Contact Us / Visit Us (click here)
Office/Warehouse Closed Jan 1, 2025.
International Customers Click Here [Updated 1/2025]
 

Search This Category:
Select layout:
Products 49-96 of 2533
AC - Power Steering Pump Bolt EACH - Repro
0
$0 Price: $2.05
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41010 -

part # 370608-S. Used in multiple places on mounting brackets.

Accelerator Pump - Carburetor - Repro
0
$0 Price: $9.77
Online Only Price

Details

Availability: Out of Stock
Item #: 16000 -

Reproduction diaphragm pump that mounts on the front all 67 - 73 Cougar or Mustang Autolite 2V carbs as well as 1967 Autolite 4V Carbs. With today's gas, these commonly fail, especially when sitting for extended periods of time. Complete failure will cause fuel leaks, but many times these will affect performance well before a leak actually starts. Good idea to replace every few years or if sitting for 6 months or more. Replaces Ford Part #: C4AZ-9B559-A.

Access Plug - Shift Bolt - Repro
0
$0 Price: $2.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 15287 -

Molded rubber plug, seals access hole in the side of shift housing. Replaces Ford Part # : C5ZZ-7C147-B Check out this video

Access Plug - Shifter Stem - Automatic Trans - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $2.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41376 -

Floor shifter access plug. 1967-73 Mercury Cougar and Ford Mustang, also fits floor shift 1971+ Mercury Comet and Ford Maverick. Ford Part number C7ZZ-7C147-A. Check out this video

Actuator - Seat Back Release - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $49.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30990 -

Used actuator for the seat back release on the 1971 - 1973 Mercury Cougar or Ford Mustang. This item is tested and will be in working condition. Left is the same as right, two required per car. Sold individually.

Adapter Plates - Center Caps - Legendary Wheels - Repro
0
$0 Price: $21.64
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 30956 -

Reproduction center cap adapter kit for installing Legendary center caps on the Legendary Series GT9 wheels. The spacing is a bit deeper on these specific wheels, so this adapter kit comes with special adapters and longer screws.  This kit is intended to make original and after market Mag 500 and Style Steel wheels center caps work on the Legendary Series GT9 wheels.  Please note that the included screws may not fit the thread pattern of some center caps.  The plates will...

Adhesive - Weatherstrip - BLACK - 5oz - New
0
$0 Price: $23.36
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14-0008 -

3M brand weather strip adhesive for installing the various rubber weather stripping found on Mercury Cougars on all years. This is the black colored adhesive and is the 5 ounce size.

Adhesive - Weatherstrip - Yellow - 2oz - New
0
$0 Price: $8.95
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14-0009 -

3M brand weather strip adhesive for installing the various rubber weather stripping found on Mercury Cougars on all years. This is the yellow colored adhesive, the factory used yellow adhesive on the weather stripping and is the 2 ounce size.

Adhesive - Weatherstrip - YELLOW - 5oz - New
0
$0 Price: $15.56
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14-0010 -

New 5oz tube of yellow weatherstrip adhesive for installing the rubber weatherstripping found on the Mercury or Ford. This 3M brand adhesive is a great match to the yellow colored adhesive that Ford used to attach the weatherstripping on many of it's vehicles back in the day.

Adhesive / Epoxy Applicator - Dual Plunger - 60 DAY LOANER - Used
1966-71 Ford Fairlane (Will not fit 1962-65)
1962-67 Nova and Chevy II
1970-77 Maverick and Comet
1975-80 Granada, Monarch and Versailles
1960-71 Falcon, Torino, Ranchero, Comet, Montego
1970 and up (with shock tower) AMC's, AMX, Javelin, Rebel, Hornet and Gremlin
0
$0 Price: $45.45
Online Only Price

Details

Availability: Out of Stock
Item #: 31044 -

We will loan you this adhesive / epoxy applicator for 60 days, with a 100% refundable purchase price. Only available to customers that purchase our 3M bonding adhesive. Tool must be returned in undamaged condition with no missing parts within the 60 day time period.Returns past 60 days are subject to a 25% restocking fee. ...

Adhesive / Epoxy Applicator - Dual Plunger - New
1966-71 Ford Fairlane (Will not fit 1962-65)
1962-67 Nova and Chevy II
1970-77 Maverick and Comet
1975-80 Granada, Monarch and Versailles
1960-71 Falcon, Torino, Ranchero, Comet, Montego
1970 and up (with shock tower) AMC's, AMX, Javelin, Rebel, Hornet and Gremlin
0
$0 Price: $45.45
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14-0024 -

New adhesive / epoxy applicator to apply our 3M window adhesive to the glass (or whatever else needs bonding) in your Mercury or Ford. This non-drip unit features an easy loading breech, a 1:1 mixing ratio and full cartridge support. We also offer a 60 day loaner if you only need this unit for a short time. ...

Adjustable Clip - Moulding / Trim Retainer - Front Windshield / Rear Window - EACH - Repro
0
$0 Price: $0.98
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 30880 -

This stepped window trim clip is great for times when your stainless trim just will not click into place. We have found that the reproduction cougar rear window gasket is a little taller than OEM and this adjustable clip allows you to compensate. Another instance this multi-fit clip works is when someone has replaced one or more nail-heads that the clip fastens to and located them in the wrong place.Sold Individually.These clips attach to posts built in to the car. In case you're missing some...

Adjustable Vacuum Advance - Distributor - New
0
MSRP:$59.99
$59.99 Price: $49.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26202 -

The Proper ignition advance curve is vital for maximum performance, economy (gas mileage) and drive-ability. Ford / Mercury owners had few acceptable choices with regard to adjusting the vacuum curve with their OEM distributor. You could fumble with the stock washers, fiber stops and springs (a hit-or-miss exercise in frustration!) or you could spend the money on an adjustable after market vacuum advance that looks completely out of place and cost you major judging points. This works on any...

Adjusting Arm - Alternator - 429 - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $50.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25101 -

Alternator adjusting bracket found on 429 engines. Not technically correct for 1970-71 429CJ engines, this is the passenger car version. The true 429CJ alternator bracket is slightly different and extremely hard to find. This is a very good and economical substitute. Has Ford part number D0SE-10145-A stamping.

Adjusting Cam Eliminator Kit - Lower Control Arm - New
0
$0 Price: $42.95
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 10487 -

This high performance alignment kit replaces the factory eccentric bolt and cam that holds the lower control arm to the frame. The eccentric cam is used for setting wheel camber. When the eccentric is turned, the lower arm moves in or out changing camber. Stock eccentric cams can slip or rotate going over bumps, allowing the alignment to change. Which is the cause of many worn tires. The lower control arm adjusting cam eliminator kit replaces the eccentric bolt and cam with non slipping...

Adjusting Sleeve - Tie Rod - Repro
0
$0 Price: $11.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26769 -

Sleeve and hardware for joining the inner and outer tie rods together. This also is a 'toe in' adjustment part. Sold individually, two needed per car. Replaces Ford Part #: C2AA-3310-A

Adjusting Spacer - Power Steering Pump - 351C - without A/C - Used
$0 Price: $29.88
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 23391 -

384543-S8 Power steering pump adjusting spacer for use without air conditioning. For most 1970 - 1973 Mercury Cougar or Ford Mustang with 351C engines. Spacer dimensions: 7/16" I.D. and 1/2" thick.*Note 1970 and later cars with 302 or 351W engines use a 3/4 inch spacer.

Adjustment Bolt Assembly - Transmission Selector Rod - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $29.88
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10491 -

Ford called this part a 'sleeve'. Attaches to the lower shifter arm with a hitch pin. Has nice bushing, with correct nut, washer, and pin. The 1967/68 and 1969/73 versions are identical. The C1AA-7353-C sleeve has fine threads, the C9OZ-7353-A has course threads. Fits all 1967-73 Mercury Cougar and Ford Mustang, and we suspect many other Ford vehicles beginning in 1961. Check out our video on rebuilding your shifter below: ...

Adjustment Cam - Lower Control Arm - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $14.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24393 -

C8OA-3B236-A Complete lower control arm cam and attaching bolt. 4 pieces included - Cam/bolt, lower cam, nut and lock washer. We offer this used front suspension lower control arm adjusting cam from rust free Western States cars. These are MUCH better quality than any of the stock "looking" reproductions offered. For use on all 1967 - 1973 Mercury Cougar and Ford Mustangs. Part of the C6OZ-3048-A lower arm mounting kit. Bolt/cam part number C8OA-3B236-A, secondary cam part...

Air Cleaner - Oval - Repro
0
$0 Price: $125.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 15704 -

This air cleaner assembly never came from the factory on any Cougar, but was an over the counter option available from your Ford dealer. If you have a very nice hood blanket I would think twice before using it in conjunction with this air cleaner assembly as it will leave an imprint. To avoid this problem with small block cars you can use a lower profile carburetor spacer, but on big block cars this is not an option due to the already thin design of the factory carburetor spacer. This will...

Air Cleaner Bolt - Carb Screw - Two Barrel Carburetor - EACH - Repro
0
$0 Price: $9.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41260 -

Sold individually. Used on factory 2V Ford carburetors. Zinc (dark gray)

Air Cleaner Bolt - Carburetor Stud - Ford Holley - EACH - Repro
0
$0 Price: $4.25
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 32371 -

Reproduction carburetor stud for all Ford numbered Holley carburetors 1967-71. 1/4-20 double ended stud from AMK. Stud only, no wingnut. 

Air Cleaner Decal - 351 2V - Repro
0
$0 Price: $8.87
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33933 -

This is a reproduction of the original engine displacement decal. Located on the top of the air cleaner. H code 351 2 barrel Cleveland.  NOTE: This decal has a pinkish/orange tint to it. Fits the following models with a 351-2V engine: 1971 Cougar 1971 Mustang

Air Cleaner Decal - 351 4V - Repro
0
$0 Price: $8.87
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 33376 -

This is a reproduction of the original engine displacement decal. Located on the top of the air cleaner. M code 351 4 barrel Cleveland.  NOTE: This decal has a pinkish/orange tint to it. Fits the following models with a 351-4V engine: 1971 Cougar 1971 Mustang

Air Cleaner Decal - 429 4V CJ Non Ram Air - Repro
0
$0 Price: $14.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26287 -

This is a reproduction of the original engine displacement round decal, Chrome background with gold followed by black and chrome checkerboard followed by gold background with chrome Cougar logo, followed by black and chrome checkerboard followed by black background with gold CJ 429-4V followed by black and chrome checkerboard followed by gold background with chrome Cougar logo, followed by black and chrome checkerboard. located on the top of the air cleaner.Outside diameter: 13 1/4"Fits...

Air Compressor - Mounting Pedestal - Stud & Nut - 351C - Used
$0 Price: $10.89
Online Only Price

Details

Availability: Out of Stock
Item #: 20672 -

Stud that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 351C / 429CJ pedestals from 1970 - 1973.*Note - Excludes 289 / 302 / 351W / 390 / 428CJ engines.

Air Compressor - Mounting Pedestal - Stud & Nut - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 27449 -

Reproduction stud and nut assembly that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 289 / 302 / 351W / 390 / 428CJ pedestals from 1967 - 1973. Stud is threaded into the cylinder head for easy installation of the cast iron pedestal bracket.*Note - Excludes 351C and 429CJ.

Air Conditioning Control Assembly - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $148.95
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0046 -

Complete heater and air conditioning control assembly that includes a bezel or face plate, knobs, bracket control mounting plate, electrical and vacuum switches. Functional, driver quality, heater control assembly for your Mercury Cougar and Ford Mustang until 1-3-1972. Does not include the indicator light plug and harness. Ford part # D1ZZ-19A884-A. *Restoration Tip* You can purchase some plastic polish (or try toothpaste) and polish for the lens back to new. Find a silver paint pen...

Air Filter - Big Block - Repro
0
$0 Price: $37.76
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 19974 -

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. * This filter fits primarily Big Block cars, but a couple of other combinations, so grab a tape measure and double check the height of the one you need to replace, as that will tell you which one you need. Air Filter Height (Inches) : 2.193" Air Filter Height (mm) : 55.7 mm  Air Filter Bottom I.D. (Inches) : 11.32" Air Filter Bottom I.D. (mm) : 287.53 mm Air Filter...

Air Filter - HiPo 289 / 427-4V - Repro
0
$0 Price: $23.27
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 19978 -

These filters feature the correct color of filter paper and an red/orange molded face. In addition, they have the correct "round hole" design on the outer shell. Fits Mustang 1965-67 K code HiPo 289 and 1968 Mercury Cougar GT-E W code 427-4V engines, that were originally equipped with the chrome high performance air filter assemblies. Please note: this filter will NOT fit a standard Ford air cleaner Replaces Ford Part #: B7SZ-9601-A. ...

Air Filter - Oval - Repro
0
$0 Price: $32.71
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 19977 -

Correct dimensions, good fit. Will show minor cracks in rubber but will not affect performance and cannot be seen when installed. Replacement air cleaner for the 1967 - 1973 Mercury Cougar Walking Cat Oval Air Cleaner, as well as other Ford oval air cleaners.

Air Filter - Repro
0
$0 Price: $21.05
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 19975 -

This Filters Last 40% Longer & Holds 53% More Dirt Than Most other Filters. Please note that the Ford Service Replacement specs for this filter (Service Replacement # D7AF9601AA) are; Type: 67; Inside: 13.000; Outside: 11.200; Height: 2.795. All reproductions that we have found follow these specs, making the filter 1/8" taller than the original filters. These filters will function properly, but the lid will not seat properly. ACTUAL FILTER SPECS: Air Filter Height (Inches) : 2.822...

Alignment Pins - Convertible Top - Economy - Repro
0
$0 Price: $27.15
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 42013 -

This 1965 Mustang alignment pin is not correct for the 1969 to 1973 Cougar but it will work. See the image to the left to see the comparison to an original 69 pin.

Alternator - Rebuilt
0
$0 Price: $129.31
Online Only Price $30 Core Charge

Buy Details

Availability: In-Stock Item
Item #: 31978 -

Remanufactured alternator for any 67 - 73 Cougar or Mustang. Specs: Rated at 55 ampsSingle V groove pulleyExternal fanPlug position at 5 o'clock

Alternator Fan - 10 Blade - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $15.89
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11906 -

Good used 10 blade alternator fan.Ford Part #: DOAZ-10A310-B.

Alternator Fan Installation Kit - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
$0 Price: $4.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19812 -

Contains nut, lock washer, and spacer. Fits all Ford alternators.

Alternator Noise Suppressor - New
0
$0 Price: $36.45
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 14305 -

If after installing a new stereo system you experience unwanted motor whine or engine noise, check all grounds on radio, amp, etc. If you still have the noise, this filter may help.Instructions included.

Alternator Pulley Nut - EACH - Repro
0
$0 Price: $0.85
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41032 -

Reproduction Alternator Pulley Nut for the 1967 - 1973 Mercury Cougar - 1967 - 1973 Ford MustangSold individually 

Alternator Wiring Harness - CONCOURS - Standard - with Alternator Warning Light - Repro
0
$0 Price: $64.05
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11643 -

Nice reproduction of the original alternator wiring harness, 2 pin individual colored boot style connector and wire colors match up to the original Ford drawings. Application is 1971 Mercury Cougar standard models or 1971 Ford Mustang with factory tachometer option, all with 351/429CJ engines. Ford service number D1OZ-14305-B. *Caution, not for use with Cougar XR7 models or Mustang with ammeter gauge.

Alternator Wiring Harness - w/o Gauges - Standard - ECONOMY - Repro
0
$0 Price: $66.36
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11820 -

Replaces Ford Part # D2ZZ-14305-C, D3DZ-14305-B, D2ZZ-14305-G & D3ZZ-14305-C Door Tag 65D & 76D

Alternator Wiring Harness - w/o Instruments - ECONOMY - Repro
0
$0 Price: $67.55
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41449 -

Reproduction Alternator Harness without Instruments for the 1971 Mercury Cougar

Alternator Wiring Harness - XR7 - CONCOURS - Repro
0
$0 Price: $81.35
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 11642 -

Nice reproduction of the original alternator wiring harness, 3 pin individual colored boot style connector and wire colors match up to the original Ford drawings. Application is 1971 Mercury Cougar XR7 models or 1971 Ford Mustang without factory tachometer option, all with 351/429CJ engines. Ford service number D1ZZ-14305-B. *Caution, not for use with Cougar standard models or Mustang with alternator warning light

Alternator Wiring Harness - XR7 - ECONOMY - Repro
0
$0 Price: $70.95
Online Only Price

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 11821 -

Replaces Ford Part # D1ZZ-14305-B Door Tag 65F & 76F

Anchor Plate - Door Striker - Driver / Passenger Side - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $19.85
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33477 -

This plate is what is located on the backside of your door jam where your striker threads in.Fits passenger and driver sides.

Anchor Plate - Trunk Hinge - EARLY - EACH - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $18.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33729 -

Threaded anchor that slides into the trunk hinge on each side. Sold individually, two needed per car. These are for Cougar and Mustang built before approximately 3/31/1971. Look for bolt spacing of 3 inches on those trunk lids.  Ford number 6242752. *Note - Trunks after March 31, 1971, used a different anchor plate. Bolt spacing of about 3 inches.

Anchor Plate - Trunk Hinge - LATE - EACH - Used
Used Item;
May Need Pulled from
a Donor Car
in our Wrecking Yard
Usually Ships:
2-5 Business Days (May delay order)
0
$0 Price: $18.86
Online Only Price

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31591 -

Threaded anchor that slides into the trunk hinge on each side. Sold individually, two needed per car. These are for Cougar and Mustang built after approximately 3/31/1971. Look for bolt spacing of 4-1/4 inches on those trunk lids.  Ford number C9AZ-6242752-A. *Note - Trunks prior to March 31, 1971, did not use this anchor plate. I think that they had a bolt spacing of 4-1/2 inches.

Anchor Strap - Tape In - Repro
0
$0 Price: $1.29
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 41416 -

Reproduction Anchor Strap - Tape In for the 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang

Antenna - Hideaway & Amplified - New
0
MSRP:$40.00
$40.00 Price: $38.18
Online Only Price

Buy Details

Availability: In-Stock Item
Item #: 26005 -

Designed for optimum AM/FM reception. Excellent solution where a conventional antenna is not desirable (ie you do not want the antenna sticking out of the top of your fender), or when you want a power antenna or just better reception without having to replacing the factory antenna with a non-original looking antenna. Allows for complete removal of factory antenna or for the factory antenna to be disconnected and left in place to maintain the factory look.  Multiple mounting options...

United StatesClose
Flag of United States
Powered by
duty and tax information for United States