Your cart is empty!
I installed these LEDs on my 68 Mustang High Country Special. No problem with installation. These LEDs work great during the day and night.
This product is as advertised fits and looks great. very glad I bought them.
Bought the 6 pack to see if this was as good as Don advertises. Came in today and put two in the
68 Country Squire on just he right side to compare withe the left. Don you were right on with these as they are very bright even in the daytime and super fast. Just tapping the brake and they go bright then dim where as the stock light barely flickered. The extra two will be going into the Maverick and I will be ordering another set for the Shelby.
Bulbs are robust and function flawlessly.
great improvement on the factory original bulbs, a much clearer sequence when the turn signal operates.
plugged right in so much better then stock at least four times brighter
I must say the wait was worth it!..Fitted them an hour before dark, turned the parkers on..WOW! Has made my Gran Torino light up..Can't wait to fit the yellow plasma's on the front.
Great product. I was on the fence about buying them due to the price, but glad I did. I wanted to make my car safer and put in brighter tail light bulbs, these are bright! I think the marker lights are as bright as the stock bulbs with the brakes on! They fit well and installation was a snap!
My tail lights are nice and bright. I feel much safer with these than the dim incandescent bulbs. You just have to make sure you switch the flasher cans, sequential unit and sidemarker light kit so they are all correct for the Plasma LEDs.
I was skeptical about the value of these plasma LED bulbs. I had replaced all the bulbs and cleaned all the grounds and sockets and installed a solid state relay. The system has been working great and brightness wise were very acceptable to me. What tempted me to switch to these was the low amperage usage claim. I installed a full set of these and they are definitely brighter. Buy what impressed me was they definitely use a lot less current. My amp gauge used to flash discharge every time I touched the brake or turned on the lights. Now the amp gauge doesn't even move and the bulbs do run cool. I am impressed.
These bulbs are a must.
These bulbs make such a difference! Now i can tell the when the turn lights are on while the parking lights are also on and they still sequence at idle with the headlights on, because the power draw is way less. Only wish the whole conversion was cheaper, but safety is important these days with distracted drivers galore!
looks good cant check fitment till I get home from middle east doing my thing
After going through other led bulbs to these there is no comparison no dead spots very bright and rich in color the transition from parking to brake is very noticeable great customer service also these bulbs fit perfectly in my 84 trans am everyone should have these bulbs
FINALLY! An 1157 bulb that REALLY is brighter. I have a 1950 Mercury with stock taillights and people are constantly telling me my brake lights are not working, only to pull over and see that they are, just not real bright. I have tried Sylvania Bright LED's and Ron Francis's Bright bulbs, and neither one of them is any brighter than run of the mill auto parts bulbs. The Plasma bulbs regular tail light filament is as bright as the other bulbs brake filament and the Plasma brake/turn signal filament is super bright.
The bulbs are bright and a perfect replacement for the old 1157 bulbs. The control unit is a plug and go set up easily installed. Together they significantly increase the function and brightness of your taillights. It can grab the attention of todays inattentive driver hopefully avoiding an accident.Well worth the money.
The Plasma bulbs are amazing incredible difference I was concerned at first because I did not know if they would work on my 65 Thunderbird because I did not see it listed in the description.
The price is a bit high but I had already spent money for LED's that were not bright as the incandescent lamps.
If you own a 64 -66 T-Bird these are worth the money
These lights are amazing, they are so much brighter than the originals. Thank you WCCC!
Great product. True plug and play. Very bright at a glance makes you think there is a new European car in front of you.
I bought these for my Cougar, but they are such an excellent product I'm now putting them in all of my old Fords. Its a safety issue, these are vastly brighter than the old 1157's and beside looking great makes your turn signals and brake lights immensely brighter...which is a big deal now that everybody is used to the brightness of modern cars taillights. Bonus points are that the LED's have a very low amp draw and don't generate any head like the old bulbs...these are just flat out easier on your entire electrical system. You can find LED bulbs cheaper on Ebay, but they aren't the same as these and flat aren't as good...buy them from WCCC.
I install these all of my old cars and trucks. Not only look great, but the extra visibility makes it a great safety feature.
I replaced all 6 in both of my 67 Cougars. Installation was nothing but the results are outstanding!! Numerous comments on how bright these are.
They are a little costly but the difference is well worth the investment. And to think these bulbs have a 50,000 hour life span, they will outlast the car!
If you are thinking about making the change, stop! There is no need to waste your time thinking about it, just do it! Enough said!
The light they put out is perfect, much brighter and more like a modern car with halogen or LED tail lights. Unlike incandescent bulbs, brake and turn signals are easily seen on a bright day. Install was easy and they fit the existing sockets perfectly.
I picked up a set to help improve the visibility of my tail lights. With these bad boys, "the future is so bright, I gotta wear shades." I have a 1969 Eliminator but please be sure to check the application/notes! I misread them as with a 69 Cougar needing an electronic sequencer (which I had installed) however you need the updated logic board and flasher. I don't fault WCCC for that as the information was there, I was just speed reading and not paying attention. Once I got all the right components installed, everything worked GREAT.