Gauges / Clocks & Related Parts

Guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.Check out the video below on our new gauge tester: ...

Works good but paint has gone bad. Use this gauge with your current good gauge face to save money.Check out the video below on our new gauge tester: ...

Guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.

Good used gauge that is guaranteed to work.Check out the video below on our new gauge tester: ...

Used analog style temperature gauge for all 1969-70 Mercury Cougar XR7 and Mercury Cougar Eliminator. Bench tested and working gauge. Ford marking on the gauge C9WF-10971, Ford MPC number C9WY-10883-B.Check out the video below on our new gauge tester: ...

These are original amp meters converted from reading amps to reading volts. Includes New XR7 Amps overlay made from top quality 3M 467MP and use 200MP adhesive. The longer 200MP adhesive is in place the stronger it binds. Lens has had the "amps" buffed off. Optional Volt decal is included. Core charge includes both lens and amp meter. Core charge will not be refunded if either piece is missing. Click here for a article describing the advantages of a Volt Meter.  Replaces Ford Part #:...

Used Gauge cluster assembly for the 1968 XR7 Cougar with A/C. Check out the video below on our new gauge tester: ...

Will include indicator light lenses.Check out the video below on our new gauge tester:

Used 1969 gauge face with translucent low fuel / belts indicator lenses in place.  NOTE: The 1969 gauge face had a dark hidden font that shows when the lights are illuminated, the 1970 gauge face had painted white letters that are always visible. Ford part number C9WF-10A936 Check out the video below on our new gauge tester: ...

Used 1970 gauge face with translucent low fuel / belts indicator lenses in place.  NOTE: The 1969 gauge face had a dark hidden font that shows when the lights are illuminated, the 1970 gauge face had painted white letters that are always visible. Ford part number C9WF-10887 Check out the video below on our new gauge tester: ...

This is the background for your standard model Cougar Temperature and Fuel gauge. Often times this part will be damaged from prolonged exposure to sun. This is a grade "A" part with no blemishes.Check out the video below on our new gauge tester: ...

Clean face with translucent door ajar / brakes indicator lenses intact.Check out the video below on our new gauge tester: ...

Will include indicator light lenses.Check out the video below on our new gauge tester:

Set of four XR-7 gauge background decals that stick on directly over your old, faded originals. Includes fuel, temperature, amp meter and oil temp gauge decals.Check out the video below on our new gauge tester: ...

NEW PRODUCT! This gauge tester can be used to test all gauges on any Ford vehicle from 1956 to 1983. We are privileged to be one of the first companies able to offer this new product that has long been needed by the classic car community. Now you can quickly determine if the gauges in your car are accurate with this gauge tester. You can verify the high medium and low reading for your gauges, and also shows that the Instrument Voltage Regulator is working. If you own a...

This brass connector screws to the dash structure and serves as a ground point for the instrument cluster wiring harness. See photo above as a reference of connection point. Good for both Standard and XR7 67 - 68 Cougars.

Fits the 1969 Standard Cougar, good used housing with no rust or modifications.Ford part number C9WF-10843

Fits the 1970 Standard Cougar, good used housing with no rust or modifications.Ford part number D0WF-10848

No rust or modifications, still has good white paint. The main difference between the 67 and 68 versions is the wiring color engravings on the backside are different between the two. Condition of the housing cannot be guaranteed. Ford casting number C7WF-10843-B Check out our video on dash removal and restoration: ...

No rust or modifications, still has good white paint. The main difference between the 67 and 68 versions is the wiring color engravings on the backside are different between the two. Condition of the housing cannot be guaranteed. Ford casting number C8WF-10843-B Check out our video on dash removal and restoration: ...

Fits the 1969 Cougar XR7, good used housing with no rust or modifications.Ford part number C9WF-10843

Fits the 1970 Cougar XR7, good used housing with no rust or modifications.Ford part number D0WF-10848

Good used unit with no cracks, only for the xr7.

Used metal indicator lens bezel for the Mercury Cougar. This is for late 1967 through 1968 which uses the small housing. The early 1967 lens was taped to the back of the dash pad. Be aware that there are 2 sizes. This bezel is for the brake, belt and turn indicators. It also is for the high beam on the 1967 which used the small indicator. On the 1968 Cougars, they had the large high beam indicator.

Used indicator lenses for the 1969 Standard fuel gauge. Taken from a used gauge, they will be in the best shape possible, no serious wear, no breaks and no cracks. Lettering will be legible and intact. Diffusers are also available.

Used indicator lenses for the 1970 Standard fuel gauge. Taken from a used gauge, they will be in the best shape possible, no serious wear, no breaks and no cracks. Lettering will be legible and intact. Diffusers are also available.

Used indicator lenses for the 1970 Standard temp gauge. Taken from a used gauge, they will be in the best shape possible, no serious wear, no breaks and no cracks. Lettering will be legible and intact. Diffusers are also available.

Used tested red lamp for the rear defog or heated back lite option for all 1971-73 Mercury Cougar and Ford Mustang with that factory option. These are tested, and the lights do work, there is a bulb sealed inside. According to the Ford MPC, this also was used on full sized Ford and Mercury cars.

Bulb and socket assembly that attaches to the back side of your instrument cluster housing on all 1967 Standard model Cougars. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C7WB-10B942-BCheck out the video below on our new gauge tester: ...

Bulb and socket assembly that attaches to the back side of your instrument cluster housing on all 1967 XR7 model Cougars. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C7WB-10B942-D.Check out the video below on our new gauge tester: ...

Four of these set at the top of the instrument cluster in the 1971-73 Cougar, evenly spaced over the four gauge pods. They are "tender" from age and heat but are intact without chips or cracks.

Replaces Ford Part # C9ZZ-10914

Insulator for mounting the ammeter on any 1969-73 Mercury Cougar or Ford Mustang with factory ammeter in gauge cluster. Also used on other Ford cars with ammeter. Casting number C9ZF-10C914.Replaces Ford Part # C9ZZ-10C914

Available in original blue light diffuser or custom red or yellow for a brighter "custom" look. Please note that depending on the options you have there are different numbers of defusers (filters) needed for different years and models. SOLD AS SET OF FOUR(4). 67 - 68 Cougar Uses 6 - Instrument Cluster (XR7 or Standard) 2 - Clock 2 - Oil Pressure Gauge 69 - 70 Cougar Uses 5 - Instrument Cluster (XR7 or Standard) 2 - Clock ...

Used jumper wire with correct ends for doubling back on the tachometer leads from the under dash harness. Works for all generations 1967-68, 1969-70, and 1971-73 Ford anything and Mercury, and Mercury Cougar with factory tachometers. If your tachometer goes bad, you will not start or keep your engine running. Good for bypassing tachometers for testing and getting home. Keep in your glove compartment or tool box.

Reproduction pair of LED's sold as an add-on to our existing kit. If you have a 67 - 70 XR7, you will need this pair of LED's for the clock. These bulbs can also be used for the oil gauge, the 67 - 68 rear console light and the courtesy lights on your door panels.

New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color while retaining your dimmer function. This kit will require o-ring installation to make the LEDS fit correctly. The rest of the installation is easy. Please do look at our diffusers listings in blue, red or yellow for that stand out custom color you...

New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color while retaining your dimmer function. No modifications are required to use these LED's. You can also get diffusers in blue, red, and yellow. NOTE: THESE LED'S ARE NOT DIMMABLE. XR-7 owners: You will also need these two extra bulbs for your clock. ...

Used " RED " belt indicator lens for the Mercury Cougar. This is the early 1967 lens that was taped to the back of the dash pad. The late 1967 through 1968 used a lens with a small metal housing.

Used " Red " belt indicator lens for the Mercury Cougar. This is for late 1967 through 1968 which uses the small housing. The early 1967 lens was taped to the back of the dash pad. The lens may have a slight arc to it due to the heat from the bulb over time.

Used " RED " brake indicator lens for the Mercury Cougar. This is the early 1967 lens that was taped to the back of the dash pad. The late 1967 through 1968 used a lens with a small metal housing.

Used " Red " brake indicator lens for the Mercury Cougar. This is for late 1967 through 1968 which uses the small housing. The early 1967 lens was taped to the back of the dash pad. The lens may have a slight arc to it due to the heat from the bulb over time.

Good used lens, will need polished but no cracks or deep scratches.Check out the video below on our new gauge tester: ...

Good reproduction of a very sought after part. Correct thickness, comes with correct green marker needle. If your current lens is foggy it will not buff out as the problem is internal, not on the surface of the lens. We have been waiting a long time for this one! To remove your clock knob you will need a quality pair of needle nose vise grips gripping the shaft while a second pair of pliers removes the knob by turning it counter clock wise. It is a good idea to put masking tape over the black...

Good used lens, will need polished but no cracks or deep scratches. Check out the video below on our new gauge tester: ...

Used XR7 fuel gauge lens. It will need to be polished but will not have deep scratches.Check out the video below on our new gauge tester: Check out our video on replacing the fuel system on a '68 Cougar! ...

Good used lens, will need polished but no cracks or deep scratches.Check out the video below on our new gauge tester: ...

Used Lens - High Beam Headlight Indicator - XR7 / Standard for the 1969 - 1970 Mercury Cougar