Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-144 of 278
$0 Price: $163.65

Buy Details

Availability: In-Stock Item
Item #: 41164 -

Complete engine mounting hardware kit for the 72-73 351C 2-barrel engine. See below for list of included hardware. Click on images to enlarge.

$0 Price: $163.65

Buy Details

Availability: In-Stock Item
Item #: 41165 -

Complete engine mounting hardware kit for the 72-73 351C 4-barrel engine. See below for list of included hardware. Click on images to enlarge.

$0 Price: $35.69

Buy Details

Availability: In-Stock Item
Item #: 12930 -

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

$0 Price: $42.15

Buy Details

Availability: In-Stock Item
Item #: 13614 -

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

$0 Price: $18.95

Buy Details

Availability: In-Stock Item
Item #: 15243 -

OE Steel Transmission Modulator Line for the 1973 Mercury Cougar with a 351 Cleveland, a 4 barrel carburetor, and a C-6 Transmission.

$0 Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 15244 -

Stainless Steel Transmission Modulator Line for the 1973 Mercury Cougar with a 351 Cleveland, a 4 barrel carburetor, and a C-6 Transmission.

$0 Price: $18.95

Buy Details

Availability: In-Stock Item
Item #: 14929 -

OE Steel Modulator Vacuum Line for all V8 engines with a C6 transmission except 429CJ or the 351C with a 4 barrel carburetor.

$0 Price: $67.37

Buy Details

Availability: In-Stock Item
Item #: 14930 -

Stainless Steel Modulator Vacuum Line for all V8 engines with a C6 transmission except 429CJ or the 351C with a 4 barrel carburetor.

$0 Price: $30.25

Buy Details

Availability: In-Stock Item
Item #: 15240 -

Reproduction Stainless Steel FMX Transmission Modulator Line for the 1972-1973 Mercury Cougar or Ford Mustang

$0 Price: $24.75

Buy Details

Availability: In-Stock Item
Item #: 15239 -

Reproduction OE Steel Transmission Modulator Line for the 1972-1973 Mercury Cougar or Ford Mustang with a 351 and a FMX Transmission.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41377 -

Locking nut that attaches the shift lever to the shifter arm and support inside the shifter buckets. We normally see the course threaded nuts on the 1971-73 shifters. Please check your shift arm support for correct threads. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31069 -

Course threaded nut for most 1969-73 automatic shift arms. This is the nut that sticks down from the bottom of your automatic floor shifter and the nut connects the shift rod that goes to your FMX transmission. 3/8-16 locking flange head nut. 

$0 Price: $0.90

Buy Details

Availability: In-Stock Item
Item #: 31243 -

New torque converter nuts for connecting torque converters to flex plates on 1967-73 Mercury Cougar or 1967-73 Ford Mustang or other Ford Lincoln Mercury that is not metric. 3/8-24 threads, Grade 8 nut with a 9/16 inch hex. 0.79" OD and 0.39" thick. Torque converters use 4 nuts for attachment.Ford number 377704-S

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 30955 -

New black screw for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2See related items for set of 4 screws as a kit. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31994 -

New black (set of 4) screws for attaching the black plastic automatic shifter bezel on any 1971-73 Mercury Cougar or Ford Mustang. Should also be for Mercury Comet and Ford Mavericks with floor shift automatic automobiles. #8 x 1/2 black pan head screw. Replaces Ford part # 52017-S2 Check out our video on rebuilding your shifter below: ...

$0 Price: $210.47

Buy Details

Availability: In-Stock Item
Item #: 33172 -

Basic C6 transmission rebuild kit. Kit includes gaskets, seals, bands, filter, modulator, everything as shown. Fits all Ford C6 transmissions for any 1967-73 Mercury Cougar or Ford Mustang with that U code C-6 transmission. Quality kit, same as supplied to professional shops. Big and small block C6's.

$0 Price: $132.51

Buy Details

Availability: In-Stock Item
Item #: 33173 -

Basic FMX transmission rebuild kit. Kit includes gaskets, seals, bands, filter, modulator, everything as shown. Fits all Ford FMX transmissions for any 1969-73 Mercury Cougar or Ford Mustang with that X code FMX transmission. Quality kit, same as supplied to professional shops. 

$0 Price: $17.42

Buy Details

Availability: In-Stock Item
Item #: 42060 -

These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30550 -

Used flexplate reinforcing ring, Ford called it a fly wheel reinforcing plate. Fits all Ford small block engines including 260, 289, 302, 351W and 351C. Strengthens the area where the automatic transmission flex plate mounts to the crankshaft. This is not just a ring with 6 holes in it, it is indexed specifically for the flex plate and only goes on one specific way. It has to be indexed because of the weight on the flex plate. Just under 4 inches in diameter. Special bolts not included, but...

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 14046 -

Automatic transmission kickdown control retracting spring. 1971-73 Mercury Cougar and full sized Ford/Mercury, mid sized Ford/Mercury, Ford Mustang, Maverick/Comet, and Thunderbird/Lincolns. V8 engines only. Replaces Ford Part #: D1AZ-7B146-A

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 26130 -

Made from original Ford blue prints to exact specifications of originals. Painted green as original.

$0 Price: $31.63

Buy Details

Availability: In-Stock Item
Item #: 33163 -

Reproduction ring gear for 164 tooth fly wheels and flex plates as found on 1968-73 Mercury Cougar and Ford and Mustang. Quality new ring gear, check Youtube for installation instructions. 

$0 Price: $10.82

Buy Details

Availability: In-Stock Item
Item #: 41533 -

This is a modern upgrade to your manual transmission cars. It replaces the bushing that is in the crank shaft. Supports the tip of the input shaft of the transmission. Quality part with roller bearings on the inside, fits small block only.Replaces Ford Part #: C7AZ-7600-A.

$0 Price: $2.35

Buy Details

Availability: In-Stock Item
Item #: 26678 -

Used to seal the Aluminum shifter housing to the transmission tunnel. Replaces Ford part #: C9ZZ-7370. Check out our video on rebuilding your shifter below: ...

$0 Price: $5.27

Buy Details

Availability: In-Stock Item
Item #: 14248 -

We suggest using white lithium grease or petroleum jelly to ensure the seal will not stick to the shift lever. Fits 1969-73 Mercury Cougar and Ford Mustang, additionally it also fits 1971+ Maverick and Comet with floor shift automatic only.  If you have any side-to-side play in the shifter, this seal will not last. We do have the shifter bushings available. Replaces Ford part  numbers C9ZZ-7D351-A & D1ZZ-7D351-A. Get the matching mounting clips here. Check...

$0 Price: $15.85

Buy Details

Availability: In-Stock Item
Item #: 33381 -

Top Loader transmission input shaft seal, small shaft, 289, 302, 351, and 390 only. Quality Timken part. Fits all 3 and 4 speed Top Loader Ford transmissions 1967-73 Mercury Cougar and 1965-73 Ford Mustang. Follow manufacturers instructions for installation or go to YouTube University.*Note - excludes big shaft 428CJ, 429CJ, and Boss 429 transmissions.

$0 Price: $16.49

Buy Details

Availability: In-Stock Item
Item #: 33379 -

Top Loader transmission rear seal, 28 splined shaft, 289, 302, 351, and 390 only. Quality Timken part. Fits all 3 and 4 speed Top Loader Ford transmissions 1967-73 Mercury Cougar and 1965-73 Ford Mustang. Follow manufacturers instructions for installation or go to YouTube University. *Note - excludes big shaft 428CJ, 429CJ, and Boss 429 transmissions.

$0 Price: $7.55

Buy Details

Availability: In-Stock Item
Item #: 13977 -

Black plastic selector button for all 1968-72 Mercury Cougar and Ford Mustang with automatic transmission. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had simulated leather wrapping. Ford part C5ZZ-7C488-M and C5ZZ-7C488-D. Your buttons may have faded to gray after many years. These black buttons are injection molded plastic and have steel wear plates just like the originals. Technically this is a copy of the...

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10454 -

Black plastic selector button for all 1968-72 Mercury Cougar and Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had faux leather wrapping. Additionally it does not fit with the 1973 chromed T-handle without trimming.  Ford part C8ZZ-7C488-B.  Check out our video on rebuilding your shifter below: ...

$0 Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31340 -

Black plastic selector button for all 1973 Mercury Cougar and Ford Mustang with automatic transmission. It does not fit with the 1968-72 chromed T-handle.  Check out our video on rebuilding your shifter below: ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10471 -

This arm is attached to your automatic transmission floor shifter (see picture at left). Fits all 1969-70 Mercury Cougar and Ford Mustang. Ford calls technical name for this part is 'Arm, Support'. These used parts will come with an intact bushing and nut. Correct for FMX and C-6 transmissions. Ford part number C9ZZ-7302-A. This part may have the course threads or fine threads. Normally this item ships with the course threads. We also stock the 1971-73 version that has a captured stud for...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18864 -

This arm is attached to your automatic transmission floor shifter. Fits all 1969-73 Mercury Cougar and Ford Mustang. Ford calls technical name for this part is 'Arm, Support'. This used part will come with a captured lower stud for attaching the shift rod as shown. Correct for FMX and C-6 transmissions. This version is found on 1972-73 cars, it has the captured lower stud for mounting the automatic shift rod to the transmission. Ford part number D1ZZ-7302-A. Check out our video on rebuilding...

$0 Price: $50.15

Buy Details

Availability: In-Stock Item
Item #: 14895 -

You will not need to make any modifications to run this leather unit in place of your original rubber boot used on three and four speed manual transmissions.

$0 Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41370 -

Automatic shifter dial black background. This part screws to the shifter bucket, and sits under the pointer when everything is assembled in your shifter bucket assembly. Fits all 1969-73 Mercury Cougar and Ford Mustangs with automatic transmissions. Original Ford part number C9ZZ-7A213-A also can be D1ZZ-7A213-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $120.02

Buy Details

Availability: In-Stock Item
Item #: 16758 -

Restored shifter T handle as found on all 1973 Mercury Cougar or Ford Mustang with automatic transmissions. This handle will actually fit on most Ford automatic floor shift levers of the era. Design is a little more ergonomic in design, compared to earlier designs. Core charge applies.Replaces Ford part number D3OZ-7213-A.